Руководство для сопровождающих Debian Osamu Aoki Лев Ламберов Russian Translation (2018)  Авторские права © 2014-2024 Osamu Aoki Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the "Software"), to deal in the Software without     restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions:     The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software. THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.     Данное руководство было создано на основе информации, содержащейся в следующих документах: * «Создание пакета Debian (руководство по debmake)», copyright © 1997 Джалдхар Виас * «Практическое руководство нового сопровождающего по созданию     пакетов Debian», copyright © 1997 Уилл Лоу * «Руководство начинающего разработчика Debian», copyright © 1998—2002 Джосип Родин, 2005—2017 Осаму Аоки, 2010 Крэйг Смолл, а также 2010 Рафаэль Херцог     Последняя версия данного руководства доступна:     * in the debmake-doc package and * at the Debian Documentation web site. Аннотация Данное учебное руководство описывает сборку пакета Debian с помощью команды debmake и предназначено для обычных пользователей Debian и будущих разработчиков. Руководство сконцентрировано на современном стиле создания пакетов и содержит множество простых примеров: * Создание пакета, содержащего сценарий командной оболочки POSIX * Создание пакета, содержащего сценарий на языке Python3 * C и Makefile/Autotools/CMake * Несколько двоичных пакетов с разделяемой библиотекой и т.д. Данное «Руководство для сопровождающих Debian» может рассматриваться как замена «Руководства начинающего разработчика Debian». --------------------------------------------------------------------- Содержание 1. Предисловие 2. Обзор 3. Необходимые предварительные требования 3.1. Люди вокруг Debian 3.2. Как принять участие 3.3. Социальная динамика Debian 3.4. Техническая памятка 3.5. Документация Debian 3.6. Справочные ресурсы 3.7. Ситуация с архивом 3.8. Подходы к участию 3.9. Начинающий участник и сопровождающий 4. Настройка инструментов 4.1. Email setup 4.2. mc setup 4.3. git setup 4.4. quilt setup 4.5. devscripts setup 4.6. sbuild setup 4.7. Persistent chroot setup 4.8. gbp setup 4.9. HTTP-прокси 4.10. Частный репозиторий Debian 4.11. Virtual machines 4.12. Local network with virtual machines 5. Simple packaging 5.1. Packaging tarball 5.2. Общая картина 5.3. Что такое debmake? 5.4. Что такое debuild? 5.5. Шаг 1: получение исходного кода основной ветки разработки 5.6. Step 2: Generate template files with debmake 5.7. Шаг 3: изменение шаблонных файлов 5.8. Step 4: Building package with debuild 5.9. Step 3 (alternatives): Modification to the upstream source 5.10. Patch by «diff -u» approach 5.11. Patch by dquilt approach 5.12. Patch by «dpkg-source --auto-commit» approach 6. Basics for packaging 6.1. Работа по созданию пакета 6.2. debhelper package 6.3. Имя пакета и версия 6.4. Родной пакет Debian 6.5. debian/rules file 6.6. debian/control file 6.7. debian/changelog file 6.8. debian/copyright file 6.9. debian/patches/* files 6.10. debian/source/include-binaries file 6.11. debian/watch file 6.12. debian/upstream/signing-key.asc file 6.13. debian/salsa-ci.yml file 6.14. Other debian/* files 7. Sanitization of the source 7.1. Fix with Files-Excluded 7.2. Fix with «debian/rules clean» 7.3. Fix with extend-diff-ignore 7.4. Fix with tar-ignore 7.5. Fix with «git clean -dfx» 8. More on packaging 8.1. Package customization 8.2. Customized debian/rules 8.3. Variables for debian/rules 8.4. Новый выпуск основной ветки 8.5. Manage patch queue with dquilt 8.6. Build commands 8.7. Note on sbuild 8.8. Special build cases 8.9. Загрузите orig.tar.gz 8.10. Пропущенные загрузки 8.11. Bug reports 9. Продвинутые темы работы над пакетом 9.1. Historical perspective 9.2. Current trends 9.3. Note on build system 9.4. Непрерывная интеграция 9.5. Предзагрузка 9.6. Усиление безопасности компилятора 9.7. Повторяемая сборка 9.8. Переменные подстановки 9.9. Пакет библиотеки 9.10. Multiarch 9.11. Split of a Debian binary package 9.12. Сценарии и примеры разделения пакета 9.13. Multiarch library path 9.14. Multiarch header file path 9.15. Multiarch *.pc file path 9.16. Библиотека символов 9.17. Library package name 9.18. Смена библиотек 9.19. Безопасная binNMU-загрузка 9.20. Отладочная информация 9.21. -dbgsym package 9.22. debconf 10. Packaging with git 10.1. Salsa repository 10.2. Salsa account setup 10.3. Salsa CI service 10.4. Branch names 10.5. Patch unapplied Git repository 10.6. Patch applied Git repository 10.7. Note on gbp 10.8. Note on dgit 10.9. Patch by «gbp-pq» approach 10.10. Manage patch queue with gbp-pq 10.11. gbp import-dscs --debsnap 10.12. Note on dgit-maint-debrebase workflow 10.13. Quasi-native Debian packaging 11. Полезные советы 11.1. Сборка с использованием кодировки UTF-8 11.2. Преобразование в кодировку UTF-8 11.3. Hints for Debugging 12. Tool usages 12.1. debdiff 12.2. dget 12.3. mk-origtargz 12.4. origtargz 12.5. git deborig 12.6. dpkg-source -b 12.7. dpkg-source -x 12.8. debc 12.9. piuparts 12.10. bts 13. Дополнительные примеры 13.1. Выборочное применение шаблонов 13.2. Без Makefile (командная оболочка, интерфейс командной оболочки) 13.3. Makefile (командная оболочка, интерфейс командной оболочки) 13.4. pyproject.toml (Python3, CLI) 13.5. Makefile (командная оболочка, графический интерфейс пользователя) 13.6. pyproject.toml (Python3, GUI) 13.7. Makefile (single-binary package) 13.8. Makefile.in + configure (single-binary package) 13.9. Autotools (single-binary package) 13.10. CMake (single-binary package) 13.11. Autotools (multi-binary package) 13.12. CMake (multi-binary package) 13.13. Интернационализация 13.14. Детали 14. Страница руководства debmake(1) 14.1. НАЗВАНИЕ 14.2. СИНТАКСИС 14.3. ОПИСАНИЕ 14.3.1. необязательные аргументы: 14.4. ПРИМЕРЫ 14.5. ВСПОМОГАТЕЛЬНЫЕ ПАКЕТЫ 14.6. ПРЕДОСТЕРЕЖЕНИЯ 14.7. ОТЛАДКА 14.8. АВТОР 14.9. ЛИЦЕНЗИЯ 14.10. СМОТРИТЕ ТАКЖЕ 15. debmake options 15.1. Shortcut options (-a, -i) 15.2. debmake -b 15.3. debmake -cc 15.4. Snapshot upstream tarball (-d, -t) 15.5. debmake -j 15.6. debmake -k 15.7. debmake -P 15.8. debmake -T 15.9. debmake -x Глава 1. Предисловие     Если вы уже в какой-то степени являетесь опытным пользователем Debian ^[1], то можете столкнутся со следующими ситуациями: * Желание установить некоторый пакет ПО, который пока отсутствует в архиве Debian.     * Желание обновить пакет Debian до более свежего выпуска из основной ветки разработки. * Желание исправить ошибки в пакете Debian с помощью заплат. Если вы хотите создать пакет Debian для удовлетворения указанных     желаний, а также чтобы поделиться вашей работой с сообществом, то вы входите в целевую аудиторию данного руководства как будущий сопровождающий Debian. ^[2] Добро пожаловать в сообщество Debian. В Debian имеется множество социальных и технических правил и договорённостей, которым необходимо следовать, поскольку Debian представляет собой большую организацию добровольцев со своей     историей. Также в Debian был разработан огромный массив инструментов для создания пакетов и инструментов для сопровождения архива, которые позволяют создавать согласованный набор двоичных пакетов, отвечающих множеству технических целей: * packages build across many architectures («Раздел 8.3, «Variables for debian/rules»») * reproducible build («Раздел 9.7, «Повторяемая сборка»») * clean build under clearly specified package dependencies and patches («Раздел 6.6, «debian/control file»», «Раздел 6.9, « debian/patches/* files»», «Раздел 4.6, «sbuild setup»») * optimal splits into multiple binary packages («Раздел 9.11, «Split of a Debian binary package»»)     * smooth library transitions («Раздел 9.18, «Смена библиотек»») * interactive installation customization («Раздел 9.22, « debconf»») * multiarch support («Раздел 9.10, «Multiarch»») * security enhancement using specific compiler flags (« Раздел 9.6, «Усиление безопасности компилятора»») * continuous integration («Раздел 9.4, «Непрерывная интеграция» ») * boot strapping («Раздел 9.5, «Предзагрузка»») * …​ Всё это ошеломляет многих новых будущих сопровождающих Debian и     затрудняет их участие в Debian. В настоящем руководстве делается попытка предоставить отправные точки для того, чтобы начать работу. В руководстве описано следующее: * Что следует знать до того, как быть вовлечённым в Debian в качестве будущего сопровождающего. * Как создать простой пакет Debian.     * Какие существуют виды правил для создания пакета Debian. * Полезные советы по созданию пакета Debian. * Примеры создания пакетов Debian для некоторых типовых сценариев. The author felt limitations of updating the original «New Maintainers' Guide» with the dh-make package and decided to create an alternative tool and its matching document to address modern requirements such as multi-arch. The result was the     debmake package version: 4.0 in 2013. The current debmake is version: 4.5.0. It comes with this updated «Guide for Debian Maintainers» in the debmake-doc (version: 1.20-1) package. (In 2016, dh-make was ported from perl to python with updated features.) Many chores and tips have been integrated into the debmake     command allowing this guide to be terse. This guide also offers many packaging examples for you to get started. Внимание     На создание и сопровождение пакета Debian хорошего качества уходят многие часы. Для выполнения этой задачи сопровождающий Debian должен быть одновременно и технически компетентным, и усердным. Некоторые важные темы объяснены подробно. Некоторые из них могут показаться вам незначительными, но, пожалуйста, проявите     терпение. Некоторые специальные случаи пропускаются. Для некоторых тем приводятся только ссылки на внешние источники. Всё это сделано намеренно, чтобы данное руководство оставалось простым и удобным в сопровождении. --------------------------------------------------------------------- ^[1] Вам необходимо знать немного о программировании в Unix, но от вас определённо не требуется быть экспертом. Вы можете узнать     об основах управления системой Debian из «Справочника Debian». Там же можно найти ссылки на ресурсы для изучения программирования в Unix. ^[2] Если вы не желаете делиться пакетом Debian с другими, то вы,     разумеется, можете скомпилировать ПО и установить пакет с исправленным исходным кодом из основной ветки разработки в каталог /usr/local/. Глава 2. Обзор Создание пакета Debian из архива package-1.0.tar.gz, содержащего простой исходный код на языке C, соответствующий «Стандартам     написания кода GNU» и «Стандарту иерархии файловой системы», может быть выполнено с помощью команды debmake, как показано ниже. $ tar -xvzf package-1.0.tar.gz $ cd package-1.0     $ debmake ... Make manual adjustments of generated configuration files $ debuild Если будет пропущена ручная правка созданных настроечных файлов,     то в созданном двоичном пакете будет отсутствовать осмысленное описание, но он будет вполне работоспособным при использовании команды dpkg для его локального развёртывания. Внимание The debmake command only provides decent template files. These     template files must be manually adjusted to their perfection to comply with the strict quality requirements of the Debian archive, if the generated package is intended for general consumption.     Если вы только начинаете создавать пакеты Debian, то не беспокойтесь о деталях и переходите к рассмотрению общей картины. If you have been exposed to Debian packaging, this looks vgry     much like the dh_make command. This is because the debmake command is intended to replace functions offered historically by the dh_make command. ^[3]     Команда debmake имеет следующие возможности: * современный стиль создания пакетов + debian/copyright: «DEP-5» compliant + debian/control: substvar support, multiarch support, multi binary packages, …​ + debian/rules: dh syntax, compiler hardening options, …​ * гибкость + many options (see «Раздел 15.2, «debmake -b»», «Глава 14, Страница руководства debmake(1)», and «Глава 15, debmake options»)     * разумные действия по умолчанию + выполнение без остановок с чистыми результатами + создание мультиархитектурного пакета, если явно не указана опция -m. + generate the non-native Debian package with the Debian source format «3.0 (quilt)», unless the -n option is explicitly specified. * дополнительные обслуживающие программы + verification of the debian/copyright file against the current source (see «Раздел 15.6, «debmake -k»») The debmake command delegates most of the heavy lifting to its     back-end packages: debhelper, dpkg-dev, devscripts, sbuild, schroot, etc. Подсказка     Обязательно защитите путём соответствующего включения в кавычки аргументы опций -b, -f, -l и -w от вмешательства командной оболочки. Подсказка     Неродной пакет Debian — обычный пакет Debian. Подсказка     Подробный журнал всех примеров сборки пакетов из данной документации можно получить, следуя инструкциям из «Раздел 13.14, «Детали»». Примечание The generation of the debian/copyright file, and the outputs from     the -c (see «Раздел 15.3, «debmake -cc»») and -k (see « Раздел 15.6, «debmake -k»») options involve heuristic operations on the copyright and license information. They may produce some erroneous results. --------------------------------------------------------------------- ^[3] Команда deb-make была популярна ещё до команды dh_make.     Версии текущего пакета debmake начинаются с 4.0, чтобы исключить совпадения и конфликты версий с устаревшим пакетом debmake, предоставлявшим команду deb-make. Глава 3. Необходимые предварительные требования     Ниже приведены необходимые предварительные требования, которые вам нужно понять до того, как вы примете участие в Debian. 3.1. Люди вокруг Debian     Существует несколько типов людей, взаимодействующих с Debian в рамках разный ролей: * Автор основной ветки разработки: тот, кто создал исходную программу. * Сопровождающий основной ветки разработки: тот, кто в настоящее время сопровождает программу. * Сопровождающий: тот, кто создаёт пакет Debian с программой. * Поручитель: тот, кто помогает сопровождающим загружать пакеты     в официальный архив пакетов Debian (после проверки содержимого пакетов). * Ментор: тот, кто помогает начинающим сопровождающим создавать пакеты и проч. * разработчик Debian (DD): член проекта Debian с полными правами на загрузку в официальный архив пакетов Debian. * сопровождающий Debian (DM): тот, кто имеет ограниченные права на загрузку в официальный архив пакетов Debian. Заметьте, что сразу же стать официальным разработчиком Debian (DD) нельзя, так как для этого требуется нечто большее, чем     только технические навыки. Тем не менее, не отчаивайтесь из-за этого. Если ваша работа полезна для других, вы всё равно можете загрузить ваш пакет либо как сопровождающий через поручителя, либо как сопровождающий Debian. Please note that you do not need to create any new packages to become an official Debian Developer. Contributing to the existing     packages can provide a path to becoming an official Debian Developer too. There are many packages waiting for good maintainers (see «"`Раздел 3.8, «Подходы к участию»»`"). 3.2. Как принять участие     Чтобы узнать, как принять участие в Debian, обратите внимание не следующее: * «Как вы можете помочь Debian?» (официальный источник) * «The Debian GNU/Linux FAQ, Chapter 13 - Contributing to the     Debian Project» (semi-official) * «Debian Wiki, HelpDebian» (дополнительный источник) * «Сайт новых участников Debian» (официальный источник) * «ЧаВО для менторов Debian» (дополнительный источник) 3.3. Социальная динамика Debian     Для подготовки к взаимодействию с Debian следует понять социальную динамику Debian, которая состоит в следующем: * Все мы являемся добровольцами. + Вы не можете диктовать остальным, что им делать. + У вас должна быть мотивация делать что-то самостоятельно. * Движущей силой является дружеское сотрудничество. + Ваше участие не должно чрезмерно досаждать остальным. + Ваш вклад ценен только в том случае, если остальные вам за него признательны. * Debian — это не школа, где вы автоматически получаете     внимание учителей. + Вам следует быть готовым к самостоятельному обучению многим вещам. + Внимание других добровольцев является очень дефицитным ресурсом. * Debian постоянно улучшается. + От вас ожидается, что вы будете создавать пакеты высокого качества. + Вы сами должны адаптироваться к изменениям. Поскольку в оставшейся части настоящего руководства мы     концентрируемся исключительно на технических аспектах создания пакетов, постольку чтобы понять социальную динамику Debian, рекомендуем обратиться к следующей документации:     * «Debian: 17 years of Free Software, "do-ocracy", and democracy» (Introductory slides by the ex-DPL) 3.4. Техническая памятка Ниже приведена техническая памятка, целью которой является     облегчение работы других сопровождающих над вашим пакетом и увеличение полезности для Debian в целом. * Упростите отладку вашего пакета. + Делайте ваш пакет простым. + Не усложняйте ваш пакет.     * Хорошо документируйте ваш пакет. + Используйте читаемый стиль для исходного кода. + Оставляйте в коде комментарии. + Форматируйте свой код везде одинаковым образом. + Сопровождайте git-репозиторий ^[4] пакета. Примечание     Отладка ПО чаще требует большего количества времени, чем написание изначально работающего ПО.     It is unwise to run your base system under the unstable suite even for the development system. * Creation of binary deb packages and their verification should use minimal unstable chroot described in «Раздел 4.6, «sbuild     setup»». * Basic interactive package development activities should use unstable chroot described in «Раздел 4.7, «Persistent chroot setup»». Примечание     Advanced package development activities such as testing of full Desktop systems, network daemons, and system installer packages, should use unstable suite running under the «virtualization». 3.5. Документация Debian     Please make yourself ready to read the pertinent part of the latest Debian documentation to generate perfect Debian packages: * «Debian Policy Manual» + The official «must follow» rules (https://www.debian.org/ doc/devel-manuals#policy) * «Debian Developer’s Reference»     + The official «best practice» document (https:// www.debian.org/doc/devel-manuals#devref) * «Guide for Debian Maintainers» — this guide + A «tutorial reference» document (https://www.debian.org/ doc/devel-manuals#debmake-doc) All these documents are published to https://www.debian.org using the unstable suite versions of corresponding Debian packages. If     you wish to have local accesses to all these documents from your base system, please consider to use techniques such as « apt-pinning» and «chroot». Если данное руководство противоречит официальной документации     Debian, то верной является последняя. В таком случае отправьте сообщение об ошибке в пакете debmake-doc с помощью команды reportbug.     Также существует следующая альтернативная вводная документация, которую вы можете прочитать вместе с настоящим руководством: * «Debian Packaging Tutorial» + https://www.debian.org/doc/devel-manuals# packaging-tutorial + https://packages.qa.debian.org/p/packaging-tutorial.html * «Ubuntu Packaging Guide» (Ubuntu is Debian based.)     + http://packaging.ubuntu.com/html/ * «Debian New Maintainers' Guide» (predecessor of this tutorial, deprecated) + https://www.debian.org/doc/devel-manuals#maint-guide + https://packages.qa.debian.org/m/maint-guide.html Подсказка     When reading these, you may consider using the debmake command in place of the dh_make command. 3.6. Справочные ресурсы Прежде чем публично задать вопрос, приложите усилия для его     самостоятельного разрешения, например, прочтите хорошую документацию: * Информацию о пакете, доступную с помощью команд aptitude, apt-cache и dpkg. * Файлы в каталоге /usr/share/doc/пакет для всех релевантных пакетов.     * Содержимое man команда для всех релевантных команд. * Содержимое info команда для всех релевантных команд. * Содержимое «архива списка рассылки debian-mentors@lists.debian.org». * Содержимое «архива списка рассылки debian-devel@lists.debian.org». Your desired information can be found effectively by using a     well-formed search string such as «keyword site:lists.debian.org» to limit the search domain of the web search engine. Создание небольшого тестового пакета — хороший способ изучить     детали создания пакетов. Исследование существующих хорошо сопровождаемых пакетов — лучший способ изучить то, как другие люди создают пакеты.     Если у вас всё ещё остались вопросы по поводу создания пакетов, вы можете задать их в следующих списках рассылки: * debian-mentors@lists.debian.org mailing list. (This mailing list is for the novice.) * debian-devel@lists.debian.org mailing list. (This mailing list is for the expert.) * IRC such as #debian-mentors. * Teams focusing on a specific set of packages. (Full list at https://wiki.debian.org/Teams)     * Списки рассылки, в которых принято общаться на отличных от английского языках. + «debian-devel-{french,italian,portuguese,spanish} @lists.debian.org» + «debian-chinese-gb@lists.debian.org» (This mailing list is for general (Simplified) Chinese discussion.) + «debian-devel@debian.or.jp» Более опытные разработчики Debian с радостью вам помогут, если вы     правильно зададите вопрос после того, как уже самостоятельно попробовали разобраться. Внимание     Debian development is a moving target. Some information found on the web may be outdated, incorrect, and non-applicable. Please use them carefully. 3.7. Ситуация с архивом     Пожалуйста, поймите ситуацию с архивом Debian. * В Debian уже имеются пакеты для большинства видов программ. * Число пакетов в архиве Debian уже в несколько раз превышает     число активных сопровождающих. * К сожалению, некоторые пакеты нуждаются в должном внимании сопровождающих. Поэтому, участие в работе над уже добавленными в архив пакетами     более чем ценно и желательно (и гораздо больше вероятность получить поручительство для загрузки) со стороны других сопровождающих. Подсказка     Команда wnpp-alert из пакета devscripts может проверять, если ли среди установленных пакетов пакеты открытые для усыновления или же осиротевшие пакеты. Подсказка     The how-can-i-help package can show opportunities for contributing to Debian on packages installed locally. 3.8. Подходы к участию     Ниже приводится псевдокод на питоноподобном языке, описывающий в программном видевозможности вашего участия в Debian: if exist_in_debian(program): if is_team_maintained(program): join_team(program) if is_orphaned(program): # maintainer: Debian QA Group adopt_it(program) elif is_RFA(program): # Request for Adoption adopt_it(program) else: if need_help(program): contact_maintainer(program) triaging_bugs(program) preparing_QA_or_NMU_uploads(program) else: leave_it(program) else: # new packages if not is_good_program(program): give_up_packaging(program)     elif not is_distributable(program): give_up_packaging(program) else: # worth packaging if is_ITPed_by_others(program): if need_help(program): contact_ITPer_for_collaboration(program) else: leave_it_to_ITPer(program) else: # really new if is_applicable_team(program): join_team(program) if is_DFSG(program) and is_DFSG(dependency(program)): file_ITP(program, area="main") # This is Debian elif is_DFSG(program): file_ITP(program, area="contrib") # This is not Debian else: # non-DFSG file_ITP(program, area="non-free") # This is not Debian package_it_and_close_ITP(program)     Где: * Для функций exist_in_debian() и is_team_maintained() нужно проверить следующее: + команду aptitude + веб-страницу «пакеты Debian» + Debian wiki «Teams» page * Для функций is_orphaned(), is_RFA() и is_ITPed_by_others() нужно проверить следующее: + вывод команды wnpp-alert + «пакеты требующие доработки и будущие» + «журналы отчётов об ошибках Debian: ошибки в псевдопакете wnpp в нестабильном выпуске» + «пакеты Debian, которым требуется внимание и забота» + «ошибки в пакете wnpp по меткам debtag»     * Для функции is_good_program() нужно проверить следующее: + программа должна быть полезна + программа не усложняет поддержку безопасности и сопровождение системы Debian + программа хорошо документирована, а её код понятен (то есть, не обфусцирован) + авторы программы согласны с созданием пакета и дружественно относятся к Debian ^[5] * Для функций is_it_DFSG() и is_its_dependency_DFSG() нужно проверить следующее: + «Критерии Debian по определению Свободного ПО» (DFSG). * Для функции is_it_distributable() нужно проверить следующее: + ПО должно иметь лицензию и лицензия должна разрешать распространение ПО.     You either need to file an ITP or adopt a package to start working on it. See the «Debian Developer’s Reference»: * «5.1. Новые пакеты».     * «5.9. Перемещение, удаление, переименование, придание статуса осиротевшего, усыновление и повторное введение пакетов». 3.9. Начинающий участник и сопровождающий Начинающий участник и сопровождающий могут недоумевать по поводу     того, что же следует изучить, чтобы начать участвовать в Debian. Ниже приводятся некоторые предложения в зависимости от того, чем вы хотите заниматься. * Создание пакетов + Основы командной оболочки POSIX и инструмента make. + Некоторое зачаточное знание Perl и Python.     * Перевод + Основы работы системы перевода PO. * Документация + Basics of text markups (XML, ReST, Wiki, …​). Начинающий участник и сопровождающий могут недоумевать по поводу     того, где же начать участвовать в Debian. Ниже приводятся некоторые предложения в зависимости от ваших навыков. * Навыки работы с командной оболочкой POSIX, Perl и Python: + Отправляйте заплаты для программы установки Debian. + Send patches to the Debian packaging helper scripts such as devscripts, sbuild, schroot, etc. mentioned in this document. * Навыки C и C++: + Отправляйте заплаты для пакетов, имеющих приоритеты     required и important. * Навыки работы с отличными от английского языками: + Отправляйте заплаты для PO-файлов программы установки Debian. + Отправляйте заплаты для PO-файлов пакетов, имеющих приоритеты required и important. * Навыки написания документации: + Обновляйте содержание «Debian Wiki». + Отправляйте заплаты к существующей «документации Debian».     Эта деятельность даст вам возможность познакомиться с другими участниками Debian и улучшить вашу репутацию.     Начинающему сопровождающему следует избегать работу над пакетами, содержащими программы с высокими рисками в плане безопасности: * программы, имеющие флаги доступа setuid или setgid     * службы * программы, устанавливаемые в каталоги /sbin/ или /usr/sbin/     Когда вы получите больше опыта в работе над пакетами, вы сможете создавать пакеты и с такими программами. --------------------------------------------------------------------- ^[4] Подавляющее большинство сопровождающих Debian используют git     , а не другие системы управления версиями, такие как hg, bzr и т.д. ^[5] Это не является абсолютным требованием. Тем не менее,     враждебные разработчики основной ветки могут стать тем, что будет опустошать ресурсы всех нас. С дружественными разработчиками можно консультироваться в решении любых проблем с программой. Глава 4. Настройка инструментов     В сборочном окружении должен быть установлен пакет build-essential.     The devscripts package should be installed in the development environment of the maintainer. It is a good idea to install and set up all of the popular set of     packages mentioned in this chapter. These enable us to share the common baseline working environment, although these are not necessarily absolute requirements. Please also consider to install the tools mentioned in the «     Overview of Debian Maintainer Tools» in the «Debian Developer’s Reference», as needed. Внимание Настройки инструментов, представленные ниже, являются лишь     примером и могут быть неактуальны при использовании самых свежих пакетов. Разработка Debian является движущейся целью. Обязательно прочтите соответствующую документацию и при необходимости обновите настройки. 4.1. Email setup Различные инструменты сопровождения Debian назначают ваш адрес     электронной почты и ваше имя из переменных окружения $DEBEMAIL и $DEBFULLNAME.     Let’s set these environment variables by adding the following lines to ~/.bashrc ^[6]. Добавьте в файл ~/.bashrc.      DEBEMAIL="osamu@debian.org" DEBFULLNAME="Osamu Aoki" export DEBEMAIL DEBFULLNAME Примечание     The above is for the author of this manual. The configuration and operation examples presented in this manual use these email address and name settings. You must use your email address and name for your system. 4.2. mc setup Команда mc предлагает вам простой способ работы с файлами. Она может открывать двоичные deb-файлы для проверки их содержимого по     простому нажатию клавиши «Ввод» при выборе соответствующего двоичного deb-файла. В качестве движка эта программа использует команду dpkg-deb. Настроим её на поддержку простой функции chdir следующим образом. Добавьте в файл ~/.bashrc.      # mc related if [ -f /usr/lib/mc/mc.sh ]; then . /usr/lib/mc/mc.sh fi 4.3. git setup     На сегодняшний день команда git является необходимым инструментом для работы с деревом исходного кода с историей. Глобальные пользовательские настройки для команды git, такие как     ваши имя и адрес электронной почты, можно установить в файле ~ /.gitconfig следующим образом.     $ git config --global user.name "Osamu Aoki" $ git config --global user.email osamu@debian.org     Если вы привыкли использовать команды CVS или Subversion, то можете установить несколько указанных ниже псевдонимов команд.     $ git config --global alias.ci "commit -a" $ git config --global alias.co checkout     Проверить ваши глобальные настройки можно следующим образом.     $ git config --global --list Подсказка     Для эффективной работы с историей git-репозитория необходимо использовать какой-нибудь инструмент с графическим интерфейсом пользователя, например, gitk или gitg. 4.4. quilt setup Команда quilt предлагает простой метод записи изменений. Для     работы с пакетами Debian следует выполнить настройку так, чтобы изменения записывались в каталог debian/patches/ вместо каталога patches/ по умолчанию. Чтобы не менять поведение самой команды quilt, создадим псевдоним     dquilt для работы с пакетами Debian, добавив следующие строки в файл ~/.bashrc. Вторая строка предоставляет команде dquilt ту же функциональность автодополнения, что и у команды quilt. Добавьте в файл ~/.bashrc.      alias dquilt="quilt --quiltrc=${HOME}/.quiltrc-dpkg" . /usr/share/bash-completion/completions/quilt complete -F _quilt_completion $_quilt_complete_opt dquilt     Теперь создадим файл ~/.quiltrc-dpkg со следующим содержимым. d=. while [ ! -d $d/debian -a `readlink -e $d` != / ]; do d=$d/..; done if [ -d $d/debian ] && [ -z $QUILT_PATCHES ]; then # if in Debian packaging tree with unset $QUILT_PATCHES QUILT_PATCHES="debian/patches"     QUILT_PATCH_OPTS="--reject-format=unified" QUILT_DIFF_ARGS="-p ab --no-timestamps --no-index --color=auto" QUILT_REFRESH_ARGS="-p ab --no-timestamps --no-index" QUILT_COLORS="diff_hdr=1;32:diff_add=1;34:diff_rem=1;31:diff_hunk=1;33:" QUILT_COLORS="${QUILT_COLORS}diff_ctx=35:diff_cctx=33" if ! [ -d $d/debian/patches ]; then mkdir $d/debian/patches; fi fi See quilt(1) and «How To Survive With Many Patches or     Introduction to Quilt (quilt.html)» on how to use the quilt command.     Для примеров использования см. «Раздел 5.9, «Step 3 (alternatives): Modification to the upstream source»». 4.5. devscripts setup Для подписывания пакета Debian вашим закрытым GPG-ключом     используется команда debsign, входящая в состав пакета devscripts . Команда debuild, входящая в состав пакета devscripts, собирает     двоичный пакет и проверяет его с помощью команды lintian. Полезно иметь более подробный вывод команды lintian.     Вы можете настроить эти команды в файле ~/.devscripts следующим образом. DEBUILD_DPKG_BUILDPACKAGE_OPTS="-i -I -us -uc"     DEBUILD_LINTIAN_OPTS="-i -I --show-overrides" DEBSIGN_KEYID="Your_GPG_keyID" The -i and -I options in DEBUILD_DPKG_BUILDPACKAGE_OPTS for the     dpkg-source command help rebuilding of Debian packages without extraneous contents (see «Глава 7, Sanitization of the source»).     В настоящее время хорошо иметь RSA-ключ длины 4096 бит, см. « Создание нового GPG-ключа». 4.6. sbuild setup The sbuild package provides a clean room («chroot») build     environment. It offers this efficiently with the help of schroot using the bind-mount feature of the modern Linux kernel. Since it is the same build environment as the Debian’s buildd     infrastructure, it is always up to date and comes full of useful features.     It can be customized to offer following features: * The schroot package to boost the chroot creation speed. * Пакет lintian предназначен для обнаружения ошибок в пакете. * The piuparts package to find bugs in the package. * The autopkgtest package to find bugs in the package.     * Пакет ccache предназначен для увеличения скорости работы gcc (необязательно). * Пакет libeatmydata1 предназначен для увеличения скорости работы dpkg (необязательно). * Параллельный запуск make позволяет увеличить скорость сборки (необязательно).     Let’s set up sbuild environment ^[7]: $ sudo apt install sbuild piuparts autopkgtest lintian     $ sudo apt install sbuild-debian-developer-setup $ sudo sbuild-debian-developer-setup -s unstable     Let’s update your group membership to include sbuild and verify it: $ newgrp -     $ id uid=1000() gid=1000() groups=...,132(sbuild)     Here, «reboot of system» or «kill -TERM -1» can be used instead to update your group membership ^[8] .     Let’s create the configuration file ~/.sbuildrc in line with recent Debian practice of «source-only-upload» as: cat >~/.sbuildrc << 'EOF' ############################################################################## # PACKAGE BUILD RELATED (source-only-upload as default) ############################################################################## # -d $distribution = 'unstable'; # -A $build_arch_all = 1; # -s $build_source = 1; # --source-only-changes $source_only_changes = 1; # -v $verbose = 1;     ############################################################################## # POST-BUILD RELATED (turn off functionality by setting variables to 0) ############################################################################## $run_lintian = 1; $lintian_opts = ['-i', '-I']; $run_piuparts = 1; $piuparts_opts = ['--schroot', 'unstable-amd64-sbuild']; $run_autopkgtest = 1; $autopkgtest_root_args = ''; $autopkgtest_opts = [ '--', 'schroot', '%r-%a-sbuild' ]; ############################################################################## # PERL MAGIC ############################################################################## 1; EOF Примечание There are some exceptional cases such as NEW uploads, uploads     with NEW binary packages, and security uploads where you can’t do source-only-upload but are required to upload with binary packages. The above configuration needs to be adjusted for those exceptional cases.     Following document assumes that sbuild is configured this way.     Edit this to your needs. Post-build tests can be turned on and off by assigning 1 or 0 to the corresponding variables, Предупреждение     Необязательные настройки могут вызывать отрицательные последствия. Отключите их в случае сомнения. Примечание     Параллельный запуск make может быть неудачным для некоторых уже имеющихся пакетов и может сделать журнал сборки сложным для прочтения. Подсказка     Many sbuild related hints are available at «Раздел 8.7, «Note on sbuild»» and «https://wiki.debian.org/sbuild» . 4.7. Persistent chroot setup Примечание     Use of independent copied chroot filesystem prevents contaminating the source chroot used by sbuild. For building new experimental packages or for debugging buggy     packages, let’s setup dedicated persistent chroot « source:unstable-amd64-desktop» by: $ sudo cp -a /srv/chroot/unstable-amd64-sbuild-$suffix /srv/chroot/unstable-amd64-desktop $ sudo tee /etc/schroot/chroot.d/unstable-amd64-desktop << EOF [unstable-desktop] description=Debian sid/amd64 persistent chroot groups=root,sbuild     root-groups=root,sbuild profile=desktop type=directory directory=/srv/chroot/unstable-amd64-desktop union-type=overlay EOF Here, desktop profile is used instead of sbuild profile. Please     make sure to adjust /etc/schroot/desktop/fstab to make package source accessible from inside of the chroot.     You can log into this chroot «source:unstable-amd64-desktop» by:     $ sudo schroot -c source:unstable-amd64-desktop 4.8. gbp setup     The git-buildpackage package offers the gbp(1) command. Its user configuration file is ~/.gbp.conf. # Configuration file for "gbp " [DEFAULT] # the default build command:     builder = sbuild # use pristine-tar: pristine-tar = True # Use color when on a terminal, alternatives: on/true, off/false or auto color = auto 4.9. HTTP-прокси Чтобы сохранить пропускную способность при обращении к     репозиторию пакетов Debian вам следует настроить локальный кэширующий HTTP-прокси. Имеется несколько вариантов: * Специализированный кэширующий HTTP-прокси, использующий пакет     apt-cacher-ng. * Generic HTTP caching proxy (squid package) configured by squid-deb-proxy package In order to use this HTTP proxy without manual configuration     adjustment, it’s a good idea to install either auto-apt-proxy or squid-deb-proxy-client package to everywhere. 4.10. Частный репозиторий Debian     Вы можете настроить собственный репозиторий пакетов Debian с помощью пакета reprepro. 4.11. Virtual machines     For testing GUI application, it is a good idea to have virtual machines. Install virt-manager and qemu-kvm packages.     Use of chroot and virtual machines allows us not to update the whole host PC to the latest unstable suite. 4.12. Local network with virtual machines In order to access virtual machines easily over the local     network, setting up multicast DNS service discovery infrastructure by installing avahi-utils is a good idea.     For all running virtual machines and the host PC, we can use each host name appended with .local for SSH to access each other. --------------------------------------------------------------------- ^[6] Предполагается, что в качестве интерактивной командной     оболочки с регистрацией вы используете Bash. Если вы используете какую-то другую командную оболочку, например, Zsh, то вместо ~ /.bashrc необходимо изменить соответствующие файлы настройки.     ^[7] Be careful since some older HOWTOs may use different chroot setups.     ^[8] Simply «logout and login under some modern GUI Desktop environment» may not update your group membership. Глава 5. Simple packaging There is an old Latin saying: «Longum iter est per praecepta,     breve et efficax per exempla» («It’s a long way by the rules, but short and efficient with examples»). 5.1. Packaging tarball Ниже приведён пример создания простого пакета Debian из простого     исходного кода на языке C, использующего в качестве системы сборки Makefile.     Допустим, имя tar-архива из основной ветки разработки будет debhello-0.0.tar.gz.     Предполагается, что этот тип исходного кода будет установлен как несистемный файл: Basics for the install from the upstream tarball.      $ tar -xzmf debhello-0.0.tar.gz $ cd debhello-0.0 $ make $ make install Debian packaging requires changing this «make install» process to     install files to the target system image location instead of the normal location under /usr/local. Примечание     Примеры создания пакета Debian из других более сложных систем сборки описаны в «Глава 13, Дополнительные примеры». 5.2. Общая картина Общая картина сборки простого неродного пакета Debian из     tar-архива основной ветки разработки debhello-0.0.tar.gz может быть представлена следующим образом: * Сопровождающий получает tar-архив debhello-0.0.tar.gz из основной ветки разработки и распаковывает его содержимое в каталог debhello-0.0. * Команда debmake добавляет шаблонные файлы исключительно в каталог debian.     + Создаётся символьная ссылка debhello_0.0.orig.tar.gz, указывающая на файл debhello-0.0.tar.gz. + Сопровождающий настраивает шаблонные файлы. * Команда debuild собирает двоичный пакет из подготовленного дерева исходного кода. + Создаётся файл debhello-0.0-1.debian.tar.xz, содержащий каталог debian. Общая картина сборки пакета.  $ tar -xzmf debhello-0.0.tar.gz     $ cd debhello-0.0 $ debmake ... manual customization $ debuild ... Подсказка     The debuild command in this and following examples may be substituted by equivalent commands such as the sbuild command. Подсказка     Если доступен tar-архив основной ветки разработки в формате .tar.xz, то используйте его вместо архивов в формате .tar.gz или .tar.bz2. Утилита xz предлагает более высокую степень сжатия, чем gzip и bzip2. 5.3. Что такое debmake? Примечание     Actual packaging activities are often performed manually without using debmake while referencing only existing similar packages and «Debian Policy Manual».     The debmake command is the helper script for the Debian packaging. («Глава 14, Страница руководства debmake(1)») * It creates good template files for the Debian packages. * Она всегда устанавливает большинство очевидных опций в разумные значения. * Создаёт tar-архив основной ветки разработки и необходимую     символьную ссылку в случае их отсутствия. * Не переписывает существующие файлы настройки в каталоге debian/. * Поддерживает мультиархитектурные пакеты. * It provides short extracted license texts as debian/copyright in decent accuracy to help license review.     Эти возможности делают работу с пакетами Debian с помощью debmake простой и современной. In retrospective, I created debmake to simplify this     documentation. I consider debmake to be more-or-less a demonstration session generator for tutorial purpose. The debmake command isn’t the only helper script to make a Debian     package. If you are interested alternative packaging helper tools, please see: * Debian wiki: «AutomaticPackagingTools» — Extensive comparison     of packaging helper scripts * Debian wiki: «CopyrightReviewTools» — Extensive comparison of copyright review helper scripts 5.4. Что такое debuild?     Ниже приведён обзор команд, похожих на команду debuild. * Файл debian/rules определяет то, как будет собран двоичный пакет Debian. * dpkg-buildpackage — официальная команда для сборки двоичного пакета Debian. Для обычной двоичной сборки она, грубо говоря, выполняет следующую последовательность команд: + «dpkg-source --before-build» (apply Debian patches, unless they are already applied) + «fakeroot debian/rules clean» + «dpkg-source --build» (build the Debian source package) + «fakeroot debian/rules build» + «fakeroot debian/rules binary» + «dpkg-genbuildinfo» (generate a *.buildinfo file) + «dpkg-genchanges» (generate a *.changes file)     + «fakeroot debian/rules clean» + «dpkg-source --after-build» (unapply Debian patches, if they are applied during --before-build) + «debsign» (sign the *.dsc and *.changes files) o Если вы следовали инструкциям (см. «Раздел 4.5, « devscripts setup»») и передали программе сборки опции -us и -uc, то данный шаг будет пропущен, а для подписи требуется вручную запустить команду debsign. * Команда debuild представляет собой обёртку для команды dpkg-buildpackage, которая собирает двоичный пакет Debian в окружении с подходящими значениями переменных окружения. * The sbuild command is a wrapper script to build the Debian binary package under the proper chroot environment with the proper environment variables. Примечание     Подробную информацию см. в dpkg-buildpackage(1). 5.5. Шаг 1: получение исходного кода основной ветки разработки     Получим исходный код основной ветки разработки. Скачаем файл debhello-0.0.tar.gz.  $ wget http://www.example.org/download/debhello-0.0.tar.gz ... $ tar -xzmf debhello-0.0.tar.gz $ tree .     ├── debhello-0.0 │   ├── Makefile │   ├── README.md │   └── src │   └── hello.c └── debhello-0.0.tar.gz 3 directories, 4 files     В нём содержится исходный код на языке C, hello.c, довольно простой. hello.c.  $ cat debhello-0.0/src/hello.c #include     int main() { printf("Hello, world!\n"); return 0; }     Итак, Makefile соответствует «Стандартам написания кода GNU» и « Стандарту иерархии файловой системы». А именно: * сборку двоичных файлов с учётом значений $(CPPFLAGS), $ (CFLAGS), $(LDFLAGS) и т. д.     * установку файлов с учётом $(DESTDIR) в качестве целевого системного образа * установку файлов с $(prefix), который можно изменить на /usr Makefile.  $ cat debhello-0.0/Makefile prefix = /usr/local all: src/hello src/hello: src/hello.c @echo "CFLAGS=$(CFLAGS)" | \ fold -s -w 70 | \ sed -e 's/^/# /' $(CC) $(CPPFLAGS) $(CFLAGS) $(LDCFLAGS) -o $@ $^     install: src/hello install -D src/hello \ $(DESTDIR)$(prefix)/bin/hello clean: -rm -f src/hello distclean: clean uninstall: -rm -f $(DESTDIR)$(prefix)/bin/hello .PHONY: all install clean distclean uninstall Примечание     В приведённом ниже примере применение команды echo к $(CFLAGS) используется для проверки настройки сборочных флагов. 5.6. Step 2: Generate template files with debmake     Вывод команды debmake довольно подробен, в нём объяснены выполняемые действия, например, как это указано ниже. The output from the debmake command.  $ cd /path/to/debhello-0.0 $ debmake -x1 I: set parameters I: sanity check of parameters I: pkg="debhello", ver="0.0", rev="1" I: *** start packaging in "debhello-0.0". *** I: provide debhello_0.0.orig.tar.gz for non-native Debian package I: pwd = "/path/to" I: $ ln -sf debhello-0.0.tar.gz debhello_0.0.orig.tar.gz I: pwd = "/path/to/debhello-0.0" I: parse binary package settings: I: binary package=debhello Type=bin / Arch=any M-A=foreign I: analyze the source tree I: build_type = make I: scan source for copyright+license text and file extensions I: 50 %, ext = md I: 50 %, ext = c I: check_all_licenses I: ... I: check_all_licenses completed for 3 files. I: bunch_all_licenses I: format_all_licenses I: make debian/* template files I: debmake -x "1" ... I: creating => debian/control I: creating => debian/copyright I: substituting => /usr/lib/python3/dist-packages/debmake/data/extra0_changel... I: creating => debian/changelog I: substituting => /usr/lib/python3/dist-packages/debmake/data/extra0_rules.t...     I: creating => debian/rules I: substituting => /usr/lib/python3/dist-packages/debmake/data/extra0source_f... I: creating => debian/source/format I: substituting => /usr/lib/python3/dist-packages/debmake/data/extra1_README.... I: creating => debian/README.Debian I: substituting => /usr/lib/python3/dist-packages/debmake/data/extra1_README.... I: creating => debian/README.source I: substituting => /usr/lib/python3/dist-packages/debmake/data/extra1_clean.t... I: creating => debian/clean I: substituting => /usr/lib/python3/dist-packages/debmake/data/extra1_gbp.con... I: creating => debian/gbp.conf I: substituting => /usr/lib/python3/dist-packages/debmake/data/extra1_salsa-c... I: creating => debian/salsa-ci.yml I: substituting => /usr/lib/python3/dist-packages/debmake/data/extra1_watch.t... I: creating => debian/watch I: substituting => /usr/lib/python3/dist-packages/debmake/data/extra1tests_co... I: creating => debian/tests/control I: substituting => /usr/lib/python3/dist-packages/debmake/data/extra1upstream... I: creating => debian/upstream/metadata I: substituting => /usr/lib/python3/dist-packages/debmake/data/extra1patches_... I: creating => debian/patches/series I: substituting => /usr/lib/python3/dist-packages/debmake/data/extra1source.n... I: creating => debian/source/local-options.ex I: substituting => /usr/lib/python3/dist-packages/debmake/data/extra1source.n... I: creating => debian/source/local-patch-header.ex I: substituting => /usr/lib/python3/dist-packages/debmake/data/extra1single_d... I: creating => debian/dirs I: substituting => /usr/lib/python3/dist-packages/debmake/data/extra1single_i... I: creating => debian/install I: substituting => /usr/lib/python3/dist-packages/debmake/data/extra1single_l... I: creating => debian/links I: $ wrap-and-sort I: $ wrap-and-sort complete. Now, debian/* may have a blank line at the top.... Команда debmake создаёт все шаблонные файлы на основе опций     командной строки. Поскольку никакие опции не были переданы, команда debmake выбирает для вас разумные значения по умолчанию: * Имя пакета с исходным кодом: debhello * Версия основной ветки разработки: 0.0 * Имя двоичного пакета: debhello     * Номер редакции Debian: 1 * Тип пакета: bin (пакет с двоичными исполняемыми файлами формата ELF) * The -x option: -x1 (without maintainer script supports for simplicity) Примечание     Here, the debmake command is invoked with the -x1 option to keep this tutorial simple. Use of default -x3 option is highly recommended.     Проверим созданные шаблонные файлы. Дерево исходного кода после простого выполнения debmake.  $ cd /path/to $ tree . ├── debhello-0.0 │   ├── Makefile │   ├── README.md │   ├── debian │   │   ├── README.Debian │   │   ├── README.source │   │   ├── changelog │   │   ├── clean │   │   ├── control │   │   ├── copyright │   │   ├── dirs │   │   ├── gbp.conf │   │   ├── install     │   │   ├── links │   │   ├── patches │   │   │   └── series │   │   ├── rules │   │   ├── salsa-ci.yml │   │   ├── source │   │   │   ├── format │   │   │   ├── local-options.ex │   │   │   └── local-patch-header.ex │   │   ├── tests │   │   │   └── control │   │   ├── upstream │   │   │   └── metadata │   │   └── watch │   └── src │   └── hello.c ├── debhello-0.0.tar.gz └── debhello_0.0.orig.tar.gz -> debhello-0.0.tar.gz 8 directories, 24 files Файл debian/rules является сборочным сценарием, предоставляемым     сопровождающим пакета. Ниже приводится его шаблонный файл, созданный командой debmake. debian/rules (шаблонный файл):  $ cd /path/to/debhello-0.0 $ cat debian/rules #!/usr/bin/make -f # You must remove unused comment lines for the released package. #export DH_VERBOSE = 1 #export DEB_BUILD_MAINT_OPTIONS = hardening=+all #export DEB_CFLAGS_MAINT_APPEND = -Wall -pedantic     #export DEB_LDFLAGS_MAINT_APPEND = -Wl,-O1 %: dh $@ #override_dh_auto_install: # dh_auto_install -- prefix=/usr #override_dh_install: # dh_install --list-missing -X.pyc -X.pyo По сути, это стандартный файл debian/rules с командой dh. (Для     удобства настройки в нём содержится несколько закомментированных строк.)     Файл debian/control предоставляет основные метаданные пакета Debian. Ниже приведён шаблонный файл, созданный командой debmake. debian/control (шаблонный файл):  $ cat debian/control Source: debhello Section: unknown Priority: optional Maintainer: "Osamu Aoki" Build-Depends: debhelper-compat (= 13) Standards-Version: 4.6.2 Homepage:     Rules-Requires-Root: no #Vcs-Git: https://salsa.debian.org/debian/debhello.git #Vcs-Browser: https://salsa.debian.org/debian/debhello Package: debhello Architecture: any Multi-Arch: foreign Depends: ${misc:Depends}, ${shlibs:Depends} Description: auto-generated package by debmake This Debian binary package was auto-generated by the debmake(1) command provided by the debmake package. Предупреждение     If you leave «Section: unknown» in the template debian/control file unchanged, the lintian error may cause the build to fail. Since this is the ELF binary executable package, the debmake command sets «Architecture: any» and «Multi-Arch: foreign». Also,     it sets required substvar parameters as «Depends: $ {shlibs:Depends}, ${misc:Depends}». These are explained in « Глава 6, Basics for packaging». Примечание     Please note this debian/control file uses the RFC-822 style as documented in «5.2 Source package control files — debian/control» of the «Debian Policy Manual». The use of the empty line and the leading space are significant. Файл debian/copyright предоставляет данные об авторском праве на     пакет Debian. Ниже приведён шаблонный файл, созданный командой debmake. debian/copyright (шаблонный файл):  $ cat debian/copyright Format: https://www.debian.org/doc/packaging-manuals/copyright-format/1.0/ Upstream-Name: debhello Upstream-Contact: Source: # # Please double check copyright with the licensecheck(1) command.     Files: Makefile README.md src/hello.c Copyright: __NO_COPYRIGHT_NOR_LICENSE__ License: __NO_COPYRIGHT_NOR_LICENSE__ #----------------------------------------------------------------------------... # Files marked as NO_LICENSE_TEXT_FOUND may be covered by the following # license/copyright files. 5.7. Шаг 3: изменение шаблонных файлов     От сопровождающего требуется вручную внести некоторые изменения шаблонных файлов. In order to install files as a part of the system files, the $ (prefix) value of /usr/local in the Makefile should be overridden     to be /usr. This can be accommodated by the following the debian/ rules file with the override_dh_auto_install target setting « prefix=/usr». debian/rules (версия сопровождающего):  $ cd /path/to/debhello-0.0 $ vim debian/rules ... hack, hack, hack, ... $ cat debian/rules #!/usr/bin/make -f export DH_VERBOSE = 1     export DEB_BUILD_MAINT_OPTIONS = hardening=+all export DEB_CFLAGS_MAINT_APPEND = -Wall -pedantic export DEB_LDFLAGS_MAINT_APPEND = -Wl,--as-needed %: dh $@ override_dh_auto_install: dh_auto_install -- prefix=/usr Экспортирование переменой окружения DH_VERBOSE в файле debian/     rules, как это сделано выше, приводит к тому, что инструмент debhelper создаёт более подробный отчёт о сборке. Exporting DEB_BUILD_MAINT_OPTION as above sets the hardening     options as described in the «FEATURE AREAS/ENVIRONMENT» in dpkg-buildflags(1). ^[9]     Exporting DEB_CFLAGS_MAINT_APPEND as above forces the C compiler to emit all the warnings.     Exporting DEB_LDFLAGS_MAINT_APPEND as above forces the linker to link only when the library is actually needed. ^[10] The dh_auto_install command for the Makefile based build system essentially runs «$(MAKE) install DESTDIR=debian/debhello». The     creation of this override_dh_auto_install target changes its behavior to «$(MAKE) install DESTDIR=debian/debhello prefix=/usr» .     Here are the maintainer versions of the debian/control and debian /copyright files. debian/control (версия сопровождающего):  $ vim debian/control ... hack, hack, hack, ... $ cat debian/control Source: debhello Section: devel Priority: optional Maintainer: Osamu Aoki Build-Depends: debhelper-compat (= 13)     Standards-Version: 4.6.2 Homepage: https://salsa.debian.org/debian/debmake-doc Rules-Requires-Root: no Package: debhello Architecture: any Multi-Arch: foreign Depends: ${misc:Depends}, ${shlibs:Depends} Description: Simple packaging example for debmake This Debian binary package is an example package. (This is an example only) debian/copyright (версия сопровождающего):  $ vim debian/copyright ... hack, hack, hack, ... $ cat debian/copyright Format: https://www.debian.org/doc/packaging-manuals/copyright-format/1.0/ Upstream-Name: debhello Upstream-Contact: Osamu Aoki Source: https://salsa.debian.org/debian/debmake-doc Files: * Copyright: 2015-2021 Osamu Aoki License: Expat Permission is hereby granted, free of charge, to any person obtaining a     copy of this software and associated documentation files (the "Software"), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions: . The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software. . THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.     Let’s remove unused template files and edit remaining template files: * debian/README.source * debian/source/local-option.ex * debian/source/local-patch-header.ex     * debian/patches/series (No upstream patch) * clean * dirs * install * links Шаблонные файлы в debian/. (v=0.0):  $ rm -f debian/clean debian/dirs debian/install debian/links $ rm -f debian/README.source debian/source/*.ex $ rm -rf debian/patches $ tree -F debian debian/ ├── README.Debian ├── changelog ├── control ├── copyright     ├── gbp.conf ├── rules* ├── salsa-ci.yml ├── source/ │   └── format ├── tests/ │   └── control ├── upstream/ │   └── metadata └── watch 4 directories, 11 files Подсказка     Configuration files used by the dh_* commands from the debhelper package usually treat # as the start of a comment line. 5.8. Step 4: Building package with debuild В данном дереве исходного кода вы можете создать неродной пакет Debian с помощью команды debuild или эквивалентных ей команд (см.     «Раздел 5.4, «Что такое debuild?»»). Вывод команды очень подробен, выполняемые действия объясняются в нём следующим образом. Building package with debuild.  $ cd /path/to/debhello-0.0 $ debuild dpkg-buildpackage -us -uc -ui -i dpkg-buildpackage: info: source package debhello dpkg-buildpackage: info: source version 0.0-1 dpkg-buildpackage: info: source distribution unstable dpkg-buildpackage: info: source changed by Osamu Aoki dpkg-source -i --before-build . dpkg-buildpackage: info: host architecture amd64 debian/rules clean dh clean     dh_auto_clean make -j12 distclean ... debian/rules binary dh binary dh_update_autotools_config dh_autoreconf dh_auto_configure dh_auto_build make -j12 "INSTALL=install --strip-program=true" make[1]: Entering directory '/path/to/debhello-0.0' # CFLAGS=-g -O2 ... Finished running lintian.     You can verify that CFLAGS is updated properly with -Wall and -pedantic by the DEB_CFLAGS_MAINT_APPEND variable. The manpage should be added to the package as reported by the     lintian package, as shown in later examples (see «Глава 13, Дополнительные примеры»). Let’s move on for now.     Проверим результат сборки. Файлы debhello версии 0.0, созданные с помощью команды debuild:  $ cd /path/to $ tree -FL 1 ./ ├── debhello-0.0/ ├── debhello-0.0.tar.gz ├── debhello-dbgsym_0.0-1_amd64.deb     ├── debhello_0.0-1.debian.tar.xz ├── debhello_0.0-1.dsc ├── debhello_0.0-1_amd64.build ├── debhello_0.0-1_amd64.buildinfo ├── debhello_0.0-1_amd64.changes ├── debhello_0.0-1_amd64.deb └── debhello_0.0.orig.tar.gz -> debhello-0.0.tar.gz 2 directories, 9 files     Вы видите все созданные файлы. * debhello_0.0.orig.tar.gz представляет собой символьную ссылку на tar-архив основной ветки разработки. * debhello_0.0-1.debian.tar.xz содержит файлы, созданные сопровождающим. * debhello_0.0-1.dsc представляет собой файл с метаданными для пакета Debian с исходным кодом.     * debhello_0.0-1_amd64.deb — двоичный пакет Debian. * The debhello-dbgsym_0.0-1_amd64.deb is the Debian debug symbol binary package. See «Раздел 9.21, «-dbgsym package»». * The debhello_0.0-1_amd64.build file is the build log file. * The debhello_0.0-1_amd64.buildinfo file is the meta data file generated by dpkg-genbuildinfo(1). * debhello_0.0-1_amd64.changes — файл с метаданными для двоичного пакета Debian. debhello_0.0-1.debian.tar.xz содержит изменения Debian, внесённые     в исходный код основной ветки разработки. Содержимое этого файла приведено ниже. Содержимое архива debhello_0.0-1.debian.tar.xz:  $ tar -tzf debhello-0.0.tar.gz debhello-0.0/ debhello-0.0/src/ debhello-0.0/src/hello.c debhello-0.0/Makefile debhello-0.0/README.md $ tar --xz -tf debhello_0.0-1.debian.tar.xz debian/ debian/README.Debian     debian/changelog debian/control debian/copyright debian/gbp.conf debian/rules debian/salsa-ci.yml debian/source/ debian/source/format debian/tests/ debian/tests/control debian/upstream/ debian/upstream/metadata debian/watch     The debhello_0.0-1_amd64.deb contains the binary files to be installed to the target system.     The debhello-debsym_0.0-1_amd64.deb contains the debug symbol files to be installed to the target system. The binary package contents of all binary packages:  $ dpkg -c debhello-dbgsym_0.0-1_amd64.deb drwxr-xr-x root/root ... ./ drwxr-xr-x root/root ... ./usr/ drwxr-xr-x root/root ... ./usr/lib/ drwxr-xr-x root/root ... ./usr/lib/debug/ drwxr-xr-x root/root ... ./usr/lib/debug/.build-id/ drwxr-xr-x root/root ... ./usr/lib/debug/.build-id/be/ -rw-r--r-- root/root ... ./usr/lib/debug/.build-id/be/f1e0185834f3c3e2614cf8... drwxr-xr-x root/root ... ./usr/share/     drwxr-xr-x root/root ... ./usr/share/doc/ lrwxrwxrwx root/root ... ./usr/share/doc/debhello-dbgsym -> debhello $ dpkg -c debhello_0.0-1_amd64.deb drwxr-xr-x root/root ... ./ drwxr-xr-x root/root ... ./usr/ drwxr-xr-x root/root ... ./usr/bin/ -rwxr-xr-x root/root ... ./usr/bin/hello drwxr-xr-x root/root ... ./usr/share/ drwxr-xr-x root/root ... ./usr/share/doc/ drwxr-xr-x root/root ... ./usr/share/doc/debhello/ -rw-r--r-- root/root ... ./usr/share/doc/debhello/README.Debian -rw-r--r-- root/root ... ./usr/share/doc/debhello/changelog.Debian.gz -rw-r--r-- root/root ... ./usr/share/doc/debhello/copyright     The generated dependency list of all binary packages. The generated dependency list of all binary packages (v=0.0):  $ dpkg -f debhello-dbgsym_0.0-1_amd64.deb pre-depends \     depends recommends conflicts breaks Depends: debhello (= 0.0-1) $ dpkg -f debhello_0.0-1_amd64.deb pre-depends \ depends recommends conflicts breaks Depends: libc6 (>= 2.34) Внимание     Many more details need to be addressed before uploading the package to the Debian archive. Примечание Если вы пропустили ручную настройку автоматически созданных командой debmake файлов настройки, то у созданного двоичного     пакета может отсутствовать понятное другим описание пакета, а также пакет может несоответствовать некоторым требованиям политики. Такой сырой пакет вполне хорошо работает, если передать его команде dpkg, и может оказаться вполне достаточным для его локального развёртывания. 5.9. Step 3 (alternatives): Modification to the upstream source The above example did not touch the upstream source to make the     proper Debian package. An alternative approach as the maintainer is to modify files in the upstream source. For example, Makefile may be modified to set the $(prefix) value to /usr. Примечание     The above «Раздел 5.7, «Шаг 3: изменение шаблонных файлов»» using the debian/rules file is the better approach for packaging for this example. But let’s continue on with this alternative approaches as a leaning experience. In the following, let’s consider 3 simple variants of this alternative approach to generate debian/patches/* files     representing modifications to the upstream source in the Debian source format «3.0 (quilt)». These substitute «Раздел 5.7, «Шаг 3: изменение шаблонных файлов»» in the above step-by-step example: * «Раздел 5.10, «Patch by «diff -u» approach»»     * «Раздел 5.11, «Patch by dquilt approach»» * «Раздел 5.12, «Patch by «dpkg-source --auto-commit» approach» »     Please note the debian/rules file used for these examples doesn’t have the override_dh_auto_install target as follows: debian/rules (альтернативная версия сопровождающего):  $ cd /path/to/debhello-0.0 $ vim debian/rules ... hack, hack, hack, ... $ cat debian/rules     #!/usr/bin/make -f export DH_VERBOSE = 1 export DEB_BUILD_MAINT_OPTIONS = hardening=+all export DEB_CFLAGS_MAINT_APPEND = -Wall -pedantic export DEB_LDFLAGS_MAINT_APPEND = -Wl,--as-needed %: dh $@ 5.10. Patch by «diff -u» approach     Here, the patch file 000-prefix-usr.patch is created using the diff command. Patch by «diff -u».  $ cp -a debhello-0.0 debhello-0.0.orig $ vim debhello-0.0/Makefile ... hack, hack, hack, ... $ diff -Nru debhello-0.0.orig debhello-0.0 >000-prefix-usr.patch $ cat 000-prefix-usr.patch diff -Nru debhello-0.0.orig/Makefile debhello-0.0/Makefile     --- debhello-0.0.orig/Makefile 2024-07-24 10:12:40.382927188 +0900 +++ debhello-0.0/Makefile 2024-07-24 10:12:40.478928659 +0900 @@ -1,4 +1,4 @@ -prefix = /usr/local +prefix = /usr all: src/hello $ rm -rf debhello-0.0 $ mv -f debhello-0.0.orig debhello-0.0 Please note that the upstream source tree is restored to the     original state after generating a patch file 000-prefix-usr.patch .     This 000-prefix-usr.patch is edited to be DEP-3 conforming and moved to the right location as below. 000-prefix-usr.patch (DEP-3):  $ echo '000-prefix-usr.patch' >debian/patches/series $ vim ../000-prefix-usr.patch ... hack, hack, hack, ... $ mv -f ../000-prefix-usr.patch debian/patches/000-prefix-usr.patch $ cat debian/patches/000-prefix-usr.patch From: Osamu Aoki     Description: set prefix=/usr patch diff -Nru debhello-0.0.orig/Makefile debhello-0.0/Makefile --- debhello-0.0.orig/Makefile +++ debhello-0.0/Makefile @@ -1,4 +1,4 @@ -prefix = /usr/local +prefix = /usr all: src/hello Примечание When generating the Debian source package by dpkg-source via     dpkg-buildpackage in the following step of «Раздел 5.8, «Step 4: Building package with debuild»», the dpkg-source command assumes that no patch was applied to the upstream source, since the .pc/ applied-patches is missing. 5.11. Patch by dquilt approach     Here, the patch file 000-prefix-usr.patch is created using the dquilt command. dquilt is a simple wrapper of the quilt program. The syntax and     function of the dquilt command is the same as the quilt(1) command, except for the fact that the generated patch is stored in the debian/patches/ directory. Patch by dquilt.  $ dquilt new 000-prefix-usr.patch Patch debian/patches/000-prefix-usr.patch is now on top $ dquilt add Makefile File Makefile added to patch debian/patches/000-prefix-usr.patch ... hack, hack, hack, ... $ head -1 Makefile prefix = /usr $ dquilt refresh Refreshed patch debian/patches/000-prefix-usr.patch $ dquilt header -e --dep3 ... edit the DEP-3 patch header with editor $ tree -a . ├── debian │   ├── changelog │   ├── clean │   ├── control │   ├── copyright │   ├── dirs │   ├── gbp.conf │   ├── install │   ├── links │   ├── patches │   │   ├── 000-prefix-usr.patch │   │   └── series │   ├── README.Debian │   ├── README.source │   ├── rules │   ├── salsa-ci.yml │   ├── source │   │   ├── format     │   │   ├── local-options.ex │   │   └── local-patch-header.ex │   ├── tests │   │   └── control │   ├── upstream │   │   └── metadata │   └── watch ├── Makefile ├── .pc │   ├── 000-prefix-usr.patch │   │   ├── Makefile │   │   └── .timestamp │   ├── applied-patches │   ├── .quilt_patches │   ├── .quilt_series │   └── .version ├── README.md └── src └── hello.c 9 directories, 29 files $ cat debian/patches/series 000-prefix-usr.patch $ cat debian/patches/000-prefix-usr.patch Description: set prefix=/usr patch Author: Osamu Aoki Index: debhello-0.0/Makefile =================================================================== --- debhello-0.0.orig/Makefile +++ debhello-0.0/Makefile @@ -1,4 +1,4 @@ -prefix = /usr/local +prefix = /usr all: src/hello     Here, Makefile in the upstream source tree doesn’t need to be restored to the original state for the packaging. Примечание When generating the Debian source package by dpkg-source via     dpkg-buildpackage in the following step of «Раздел 5.8, «Step 4: Building package with debuild»», the dpkg-source command assumes that patches were applied to the upstream source, since the .pc/ applied-patches exists.     The upstream source tree can be restored to the original state for the packaging. The upstream source tree (restored):  $ dquilt pop -a Removing patch debian/patches/000-prefix-usr.patch Restoring Makefile No patches applied     $ head -1 Makefile prefix = /usr/local $ tree -a .pc .pc ├── .quilt_patches ├── .quilt_series └── .version 1 directory, 3 files     Here, Makefile is restored and the .pc/applied-patches is missing. 5.12. Patch by «dpkg-source --auto-commit» approach Here, the patch file isn’t created in this step but the source     files are setup to create debian/patches/* files in the following step of «Раздел 5.8, «Step 4: Building package with debuild»».     Отредактируем исходный код основной ветки разработки. Modified Makefile.      $ vim Makefile ... hack, hack, hack, ... $ head -n1 Makefile prefix = /usr     Let’s edit debian/source/local-options: debian/source/local-options for auto-commit.  $ mv debian/source/local-options.ex debian/source/local-options $ vim debian/source/local-options ... hack, hack, hack, ... $ cat debian/source/local-options # == Patch applied strategy (merge) ==     # # The source outside of debian/ directory is modified by maintainer and # different from the upstream one: # * Workflow using dpkg-source commit (commit all to VCS after dpkg-source ... # https://www.debian.org/doc/manuals/debmake-doc/ch04.en.html#dpkg-sour... # * Workflow described in dgit-maint-merge(7) # single-debian-patch auto-commit     Let’s edit debian/source/local-patch-header: debian/source/local-patch-header for auto-commit.  $ mv debian/source/local-patch-header.ex debian/source/local-patch-header     $ vim debian/source/local-patch-header ... hack, hack, hack, ... $ cat debian/source/local-patch-header Description: debian-changes Author: Osamu Aoki     Let’s remove debian/patches/* files and other unused template files. Remove unused template files.  $ rm -f debian/clean debian/dirs debian/install debian/links $ rm -f debian/README.source debian/source/*.ex $ rm -rf debian/patches $ tree debian debian ├── README.Debian ├── changelog ├── control ├── copyright ├── gbp.conf     ├── rules ├── salsa-ci.yml ├── source │   ├── format │   ├── local-options │   └── local-patch-header ├── tests │   └── control ├── upstream │   └── metadata └── watch 4 directories, 13 files     There are no debian/patches/* files at the end of this step. Примечание When generating the Debian source package by dpkg-source via     dpkg-buildpackage in the following step of «Раздел 5.8, «Step 4: Building package with debuild»», the dpkg-source command uses options specified in debian/source/local-options to auto-commit modification applied to the upstream source as patches/ debian-changes. Let’s inspect the Debian source package generated after the     following «Раздел 5.8, «Step 4: Building package with debuild»» step and extracting files from debhello-0.0.debian.tar.xz. Inspect debhello-0.0.debian.tar.xz after debuild.  $ tar --xz -xvf debhello_0.0-1.debian.tar.xz debian/ debian/README.Debian debian/changelog debian/control debian/copyright debian/gbp.conf debian/patches/     debian/patches/debian-changes debian/patches/series debian/rules debian/salsa-ci.yml debian/source/ debian/source/format debian/tests/ debian/tests/control debian/upstream/ debian/upstream/metadata debian/watch     Let’s check generated debian/patches/* files. Inspect debian/patches/* after debuild.  $ cat debian/patches/series debian-changes $ cat debian/patches/debian-changes Description: debian-changes Author: Osamu Aoki     --- debhello-0.0.orig/Makefile +++ debhello-0.0/Makefile @@ -1,4 +1,4 @@ -prefix = /usr/local +prefix = /usr all: src/hello The Debian source package debhello-0.0.debian.tar.xz is confirmed     to be generated properly with debian/patches/* files for the Debian modification. --------------------------------------------------------------------- ^[9] This is a cliché to force a read-only relocation link for the hardening and to prevent the lintian warning «W: debhello:     hardening-no-relro usr/bin/hello». This is not really needed for this example but should be harmless. The lintian tool seems to produce a false positive warning for this case which has no linked library. ^[10] This is a cliché to prevent overlinking for the complex     library dependency case such as Gnome programs. This is not really needed for this simple example but should be harmless. Глава 6. Basics for packaging Here, a broad overview is presented without using VCS operations     for the basic rules of Debian packaging focusing on the non-native Debian package in the «3.0 (quilt)» format. Примечание     Для ясности в дайльнейшем были умышленно опущены некоторые детали. Ознакомьтесь со страницами руководства dpkg-source(1), dpkg-buildpackage(1), dpkg(1), dpkg-deb(1), deb(5) и др. Пакет Debian с исходным кодом является набором входных файлов,     используемых для сборки двоичного пакета Debian, и не представляет собой только один файл.     The Debian binary package is a special archive file which holds a set of installable binary data with its associated information. Один пакет Debian с исходным кодом может использоваться для     создания нескольких двоичных пакетов Debian, определяемых в файле debian/control.     The non-native Debian package in the Debian source format «3.0 (quilt)» is the most normal Debian source package format. Примечание     Сущесвтует множество обёрточных сценариев. Используйте их для упрощения вашей работы, но обязательно разберитесь с основами их внутреннего устройства. 6.1. Работа по созданию пакета The Debian packaging workflow to create a Debian binary package involves generating several specifically named files (see «     Раздел 6.3, «Имя пакета и версия»») as defined in the «Debian Policy Manual». This workflow can be summarized in 10 steps with some over simplification as follows. 1. Загружается tar-архив основной ветки разработки в виде файла пакет-версия.tar.gz. 2. Этот архив распаковывается, создаётся множество файлов в каталоге пакет-версия/. 3. Архив основной ветки разработки копируется (или создаётся символьная ссылка на него) в файл со специальным именем имяпакета_версия.orig.tar.gz. + символ, разделяющий пакет и версию, заменяется с - (дефиса) на _ (подчёркивание) + к расширению добавляется .orig. 4. К исходному коду основной ветки разработки в каталог пакет-версия/debian/ добавляются файлы спецификации пакета Debian. + Обязательные файлы спецификации в каталоге debian/*: debian/rules Исполняемый сценарий для сборки пакета Debian (см. « Раздел 6.5, «debian/rules file»») debian/control The package configuration file containing the source package name, the source build dependencies, the binary package name, the binary dependencies, etc. (see «Раздел 6.6, «debian/control file»») debian/changelog Файл с историей пакета Debian, определяющий в первой строке версию пакета из основной ветки разработки и номер редакции Debian (см. «Раздел 6.7, «debian/ changelog file»») debian/copyright Информация об авторских правах и лицензии (см. « Раздел 6.8, «debian/copyright file»») + Необязательные файлы спецификации в каталоге debian/* (see «Раздел 6.14, «Other debian/* files»»): + The debmake command invoked in the package-version/ directory may be used to provide the initial template of these configuration files. o Обязательные файлы спецификации создаются даже при использовании опции -x0. o Команда debmake не перезаписывает какие-либо существующией файлы настройки. + These files must be manually edited to their perfection according to the «Debian Policy Manual» and «Debian Developer’s Reference». 5. The dpkg-buildpackage command (usually from its wrapper debuild or sbuild) is invoked in the package-version/ directory to make the Debian source and binary packages by invoking the debian/rules script.     + The current directory is set as: «CURDIR=/path/to/ package-version/» + Create the Debian source package in the Debian source format «3.0 (quilt)» using dpkg-source(1) o package_version.orig.tar.gz (copy or symlink of package-version.tar.gz) o package_version-revision.debian.tar.xz (tarball of debian/ found in package-version/) o package_version-revision.dsc + Build the source using «debian/rules build» into $ (DESTDIR) o «DESTDIR=debian/binarypackage/» for single binary package ^[11] o «DESTDIR=debian/tmp/» for multi binary package + Создание двоичного пакета Debian с помощью dpkg-deb(1), dpkg-genbuildinfo(1) и dpkg-genchanges(1). o двоичныйпакет_версия-редакция_архитектура.deb o …​ (There may be multiple Debian binary package files.) o пакет_версия-редакция_архитектура.changes o package_version-revision_arch.buildinfo 6. Проверка качества пакета Debian с помощью команды lintian. (рекомендуется) + Follow the rejection guidelines from ftp-master. o «REJECT-FAQ» o «Лист проверок для пакетов из NEW» o «Автоматические отклонения пакетов Lintian» («список тегов lintian») 7. Test the goodness of the generated Debian binary package manually by installing it and running its programs. 8. After confirming the goodness, prepare files for the normal source-only upload to the Debian archive. 9. Sign the Debian package file with the debsign command using your private GPG key. + Use «debsign package_version-revision_source.changes» (normal source-only upload situation) + Use «debsign package_version-revision_arch.changes» (exceptional binary upload situation such as NEW uploads, and security uploads) files for the binary Debian package upload. 10. Upload the set of the Debian package files with the dput command to the Debian archive. + Use «dput package_version-revision_source.changes» (source-only upload) + Use «dput package_version-revision_arch.changes» (binary upload) Test building and confirming of the binary package goodness as     above is the moral obligation as a diligent Debian developer but there is no physical barrier for people to skip such operations at this moment for the source-only upload.     Теперь замените каждую часть имени файла. * часть пакет на имя пакета Debian с исходным кодом * часть двоичныйпакет на имя двоичного пакета Debian     * часть версия на версию основной ветки разработки * часть редакция на номер редации Debian * the arch part with the package architecture (e.g., amd64)     See also «Source-only uploads». Подсказка     Использется множество различных стратегий по управлению заплатами и использованию систем управления версиями. Вам не следует использовать все из них. Подсказка     There is very extensive documentation in «Chapter 6. Best Packaging Practices» in the «Debian Developer’s Reference». Please read it. 6.2. debhelper package Although a Debian package can be made by writing a debian/rules script without using the debhelper package, it is impractical to do so. There are too many modern «Debian Policy» required features to be addressed, such as application of the proper file     permissions, use of the proper architecture dependent library installation path, insertion of the installation hook scripts, generation of the debug symbol package, generation of package dependency information, generation of the package information files, application of the proper timestamp for reproducible build, etc. Debhelper package provides a set of useful scripts in order to simplify Debian’s packaging workflow and reduce the burden of     package maintainers. When properly used, they will help packagers handle and implement «Debian Policy» required features automatically.     Процедура создания пакета Debian в современном стиле может быть организована в виде набора простых модульных действий: * using the dh command to invoke many utility scripts     automatically from the debhelper package, and * настройка их поведения с помощью декларативных файлов настройки в каталоге debian/. You should almost always use debhelper as your package’s build     dependency. This document also assumes that you are using a fairly contemporary version of debhelper to handle packaging works in the following contents. Примечание For debhelper «compat >= 9», the dh command exports compiler     flags (CFLAGS, CXXFLAGS, FFLAGS, CPPFLAGS and LDFLAGS) with values as returned by dpkg-buildflags if they are not set previously. (The dh command calls set_buildflags defined in the Debian::Debhelper::Dh_Lib module.) Примечание     debhelper(1) changes its behavior with time. Please make sure to read debhelper-compat-upgrade-checklist(7) to understand the situation. 6.3. Имя пакета и версия Если исходный код основной ветки разработки поставляется в виде     архива hello-0.9.12.tar.gz, можно использовать hello в качестве имени пакета с исходным кодом основной ветки разработки, а 0.9.12 — в качестве версии основной ветки. There are some limitations for what characters may be used as a     part of the Debian package. The most notable limitation is the prohibition of uppercase letters in the package name. Here is a summary as a set of regular expressions: * Upstream package name (-p): [-+.a-z0-9]{2,}     * Binary package name (-b): [-+.a-z0-9]{2,} * Upstream version (-u): [0-9][-+.:~a-z0-9A-Z]* * Debian revision (-r): [0-9][+.~a-z0-9A-Z]*     See the exact definition in «Chapter 5 - Control files and their fields» in the «Debian Policy Manual».     Вам следует соответствующим образом изменить имя пакета и версию основной ветки разработки для создания пакета Debian. Для того, чтобы информация об имени пакета и номере версии эффективно обрабатывались такими популярными инструментами как     команда aptitude, рекомендуется, чтобы длина имени пакета была равна 30 символам или была меньше; а общая длина версии и редакции была равна 14 символам или меньше. ^[12] Для того, чтобы не возникали конфликты, видимое пользователю имя     двоичного пакета не следует выбирать из числа распространённых слов. If upstream does not use a normal versioning scheme such as 2.30.32 but uses some kind of date such as 11Apr29, a random codename string, or a VCS hash value as part of the version, make sure to remove them from the upstream version. Such information can be recorded in the debian/changelog file. If you need to     invent a version string, use the YYYYMMDD format such as 20110429 as upstream version. This ensures that the dpkg command interprets later versions correctly as upgrades. If you need to ensure a smooth transition to a normal version scheme such as 0.1 in the future, use the 0~YYMMDD format such as 0~110429 as upstream version, instead.     Строки версий можно сравнивать друг с другом с помощью команды dpkg следующим образом.     $ dpkg --compare-versions ver1 op ver2     Правило сравнения версий может быть представлены следующим образом: * Строки сравниваются в порядке с начала до конца.     * Буквы больше чисел. * Числа сравниваются как целые числа. * Буквы сравниваются в порядке таблицы кодов ASCII.     Также имеются специальные правила для символов точки (.), плюса ( +) и тильды (~). Они показаны ниже.     0.0 < 0.5 < 0.10 < 0.99 < 1 < 1.0~rc1 < 1.0 < 1.0+b1 < 1.0+nmu1 < 1.1 < 2.0 Один сложный случай возникает тогда, когда разработчики основной ветки выпускают hello-0.9.12-ReleaseCandidate-99.tar.gz как     предварительный выпуск для hello-0.9.12.tar.gz. Вам следует гарантировать, что обновление пакета Debian будет происходить правильно, переименовав для этого архив с исходным кодом основной ветки в hello-0.9.12~rc99.tar.gz. 6.4. Родной пакет Debian The non-native Debian package in the Debian source format «3.0 (quilt)» is the most normal Debian source package format. The     debian/source/format file should have «3.0 (quilt)» in it as described in dpkg-source(1). The above workflow and the following packaging examples always use this format. A native Debian package is the rare Debian binary package format.     It may be used only when the package is useful and valuable only for Debian. Thus, its use is generally discouraged. Внимание A native Debian package is often accidentally built when its     upstream tarball is not accessible from the dpkg-buildpackage command with its correct name package_version.orig.tar.gz . This is a typical newbie mistake caused by making a symlink name with «-» instead of the correct one with «_».     A native Debian package has no separation between the upstream code and the Debian changes and consists only of the following: * package_version.tar.gz (copy or symlink of package-version     .tar.gz with debian/* files.) * package_version.dsc     If you need to create a native Debian package, create it in the Debian source format «3.0 (native)» using dpkg-source(1). Подсказка There is no need to create the tarball in advance if the native Debian package format is used. The debian/source/format file     should have «3.0 (native)» in it as described in dpkg-source(1) and The debian/source/format file should have the version without the Debian revision (1.0 instead of 1.0-1). Then, the tarball containing is generated when «dpkg-source -b» is invoked in the source tree. 6.5. debian/rules file The debian/rules file is the executable script which re-targets the upstream build system to install files in the $(DESTDIR) and     creates the archive file of the generated files as the deb file. The deb file is used for the binary distribution and installed to the system using the dpkg command.     The Debian policy compliant debian/rules file supporting all the required targets can be written as simple as ^[13]: Простой файл debian/rules:  #!/usr/bin/make -f     #export DH_VERBOSE = 1 %: dh $@     The dh command functions as the sequencer to call all required « dh target» commands at the right moment. ^[14] * dh clean : вычищет файлы в дереве исходного кода. * dh build : сборка дерева исходного кода * dh build-arch : сборка зависящих от архитектуры пакетов из дерева исходного кода * dh build-indep : сборка независящих от архитектуры пакетов из дерева исходного кода * dh install : установка двоичных файлов в $(DESTDIR)     * dh install-arch : установка двоичных файлов в $(DESTDIR) для зависящих от архитектуры пакетов * dh install-indep : установка двоичных файлов в $(DESTDIR) для независящих от архитектуры пакетов * dh binary : создание файла deb * dh binary-arch : создание файла deb для зависящих от архитектуры пакетов * dh binary-indep : создание файла deb для независящих от архитектуры пакетов     Here, $(DESTDIR) path depends on the build type. * «DESTDIR=debian/binarypackage/» for single binary package ^     [15] * «DESTDIR=debian/tmp/» for multi binary package     See «Раздел 8.2, «Customized debian/rules»» and «Раздел 8.3, «Variables for debian/rules»» for customization. Подсказка     Setting «export DH_VERBOSE = 1» outputs every command that modifies files on the build system. Also it enables verbose build logs for some build systems. 6.6. debian/control file The debian/control file consists of blocks of meta data separated     by a blank line. Each block of meta data defines the following in this order:     * метаданных пакета Debian с исходным кодом * метаданные двоичных пакетов Debian     See «Chapter 5 - Control files and their fields» of the «Debian Policy Manual» for the definition of each meta data. Примечание     The debmake command sets the debian/control file with « Build-Depends: debhelper-compat (= 13)» to set the debhelper compatibility level. Подсказка     If an existing package has lower than debhelper compatibility level 13, probably it’s time to update its packaging. 6.7. debian/changelog file     The debian/changelog file records the Debian package history. * This should be edited using the debchange command (alias dch ). * This defines the upstream package version and the Debian revision in its first line. * The changes need to be documented in the specific, formal, and concise style. + If Debian maintainer modification fixes reported bugs, add «Closes: #» to close those bugs. * Even if you are uploading your package by yourself, you must     document all non-trivial user-visible changes such as: + the security related bug fixes. + the user interface changes. * If you are asking your sponsor to upload it, you should document changes more comprehensively, including all packaging related ones, to help reviewing your package. + The sponsor shouldn’t be forced to second guess your thought behind your package. + The sponsor’s time is more valuable than yours. After finishing your packaging and verifying its quality, please execute the «dch -r» command and save the finalized debian/     changelog file with the suite normally set to unstable. ^[16] If you are packaging for backports, security updates, LTS, etc., please use the appropriate distribution names instead. Команда debmake создаёт изначальный шаблонный файл с версией     основной ветки и редакцией Debian. С целью предотвращения случайной загрузки в архив Debian выбирается выпуск UNRELEASED. Подсказка     The date string used in the debian/changelog file can be manually generated by the «LC_ALL=C date -R» command. Подсказка     Когда вы экспериментируете, то используйте запись debian/ changelog со строкой версии вида 1.0.1-1~rc1. Затем сведите такие записи журнала изменений в одну запись для официального пакета. The debian/changelog file is installed in the /usr/share/doc/     binarypackage directory as changelog.Debian.gz by the dh_installchangelogs command.     Журнал изменений основной ветки устанавливается в каталог /usr/ share/doc/двоичныйпакет под именем changelog.gz. The upstream changelog is automatically found by the dh_installchangelogs using the case insensitive match of its file     name to changelog, changes, changelog.txt, changes.txt, history, history.txt, or changelog.md and searched in the ./ doc/ or docs/ directories. 6.8. debian/copyright file Debian takes the copyright and license matters very seriously.     The «Debian Policy Manual» enforces having a summary of them in the debian/copyright file in the package. * «12.5. Copyright information»     * «2.3. Copyright considerations» * «License information»     The debmake command creates the initial debian/copyright template file. * Please double check copyright with the licensecheck(1)     command. * Please format it as a «machine-readable debian/copyright file (DEP-5)». Если команде debmake не была передана опция -P, то команда     пропускает создаваемые автоматически файлы под разрешительными лицензиями. Внимание     Файл debian/copyright должен быть отсортирован таким образом, что наиболее общие шаблоны файлов были размещены в начале списка. См. «Раздел 15.6, «debmake -k»». Примечание     Если при проверке лицензионной информации вы обнаружите какие-либо проблемы, то отправьте сообщение об ошибке в пакете debmake с проблемной частью текста, содержащего информацию об авторском праве и лицензии. 6.9. debian/patches/* files As demonstrated in «Раздел 5.9, «Step 3 (alternatives):     Modification to the upstream source»», the debian/patches/ directory holds * patch-file-name.patch files providing -p1 patches and     * the series file which which defines how these patches are applied.     See how these files are used in: * «Раздел 12.6, «dpkg-source -b»» to build the Debian source     package * «Раздел 12.7, «dpkg-source -x»» to extract source files from the Debian source package Примечание     Header texts of these patches should conform to «DEP-3». Примечание     If you want to use VCS tools such as git, gbp and dgit to create and manage these patches after learning basics here, please refer to later in «Глава 10, Packaging with git». 6.10. debian/source/include-binaries file The «dpkg-source --commit» command functions like dquilt but has one advantage over the dquilt command. While the dquilt command     can’t handle modified binary files, the «dpkg-source --commit» command detects modified binary files and lists them in the debian/source/include-binaries file to include them in the Debian tarball as a part of the Debian source package. 6.11. debian/watch file     The uscan(1) command downloads the latest upstream version using the debian/watch file. E.g.: Basic debian/watch file:      version=4 https://ftp.gnu.org/gnu/hello/ @PACKAGE@@ANY_VERSION@@ARCHIVE_EXT@ The uscan command may verify the authenticity of the upstream     tarball with optional configuration (see «Раздел 6.12, «debian/ upstream/signing-key.asc file»»). See uscan(1), «Раздел 8.4, «Новый выпуск основной ветки»», «     Раздел 7.1, «Fix with Files-Excluded»», and «Раздел 10.10, «Manage patch queue with gbp-pq»» for more. 6.12. debian/upstream/signing-key.asc file     Some packages are signed by a GPG key and their authenticity can be verified using their public GPG key.     For example, «GNU hello» can be downloaded via HTTP from https:// ftp.gnu.org/gnu/hello/ . There are sets of files:     * hello-версия.tar.gz (исходный код основной ветки) * hello-версия.tar.gz.sig (отделённая подпись)     Выберем самую последнюю версию. Download the upstream tarball and its signature.  $ wget https://ftp.gnu.org/gnu/hello/hello-2.9.tar.gz ...     $ wget https://ftp.gnu.org/gnu/hello/hello-2.9.tar.gz.sig ... $ gpg --verify hello-2.9.tar.gz.sig gpg: Signature made Thu 10 Oct 2013 08:49:23 AM JST using DSA key ID 80EE4A00 gpg: Can't check signature: public key not found If you know the public GPG key of the upstream maintainer from     the mailing list, use it as the debian/upstream/signing-key.asc file. Otherwise, use the hkp keyserver and check it via your web of trust. Download public GPG key for the upstream.  $ gpg --keyserver hkp://keys.gnupg.net --recv-key 80EE4A00 gpg: requesting key 80EE4A00 from hkp server keys.gnupg.net gpg: key 80EE4A00: public key "Reuben Thomas " imported gpg: no ultimately trusted keys found     gpg: Total number processed: 1 gpg: imported: 1 $ gpg --verify hello-2.9.tar.gz.sig gpg: Signature made Thu 10 Oct 2013 08:49:23 AM JST using DSA key ID 80EE4A00 gpg: Good signature from "Reuben Thomas " ... Primary key fingerprint: 9297 8852 A62F A5E2 85B2 A174 6808 9F73 80EE 4A00 Подсказка     If your network environment blocks access to the HKP port 11371, use «hkp://keyserver.ubuntu.com:80» instead. After confirming the key ID 80EE4A00 is a trustworthy one,     download its public key into the debian/upstream/signing-key.asc file. Set public GPG key to debian/upstream/signing-key.asc.      $ gpg --armor --export 80EE4A00 >debian/upstream/signing-key.asc With the above debian/upstream/signing-key.asc file and the     following debian/watch file, the uscan command can verify the authenticity of the upstream tarball after its download. E.g.: Improved debian/watch file with GPG support:      version=4 opts="pgpsigurlmangle=s/$/.sig/" \ https://ftp.gnu.org/gnu/hello/ @PACKAGE@@ANY_VERSION@@ARCHIVE_EXT@ 6.13. debian/salsa-ci.yml file     Install Salsa CI configuration file. See «Раздел 10.3, «Salsa CI service»». 6.14. Other debian/* files В каталог debian/ можно добавить дополнительные файлы настройки.     Большинство из них используются для управления командами dh_*, предоставляемыми пакетом debhelper, но также имеются дополнительные файлы для команд dpkg-source, lintian и gbp. Подсказка     Even an upstream source without its build system can be packaged just by using these files. See «Раздел 13.2, «Без Makefile (командная оболочка, интерфейс командной оболочки)»» as an example. The alphabetical list of notable optional debian/binarypackage.*     configuration files listed below provides very powerful means to set the installation path of files. Please note: * The "^-x[01234]" superscript notation that appears in the following list indicates the minimum value for the debmake -x option that generates the associated template file. See « Раздел 15.9, «debmake -x»» or debmake(1) for details. * For a single binary package, the «binarypackage.» part of the filename in the list may be removed. * For a multi binary package, a configuration file missing the «binarypackage» part of the filename is applied to the first binary package listed in the debian/control. * When there are many binary packages, their configurations can be specified independently by prefixing their name to their configuration filenames such as «package-1.install», « package-2.install», etc. * Некоторые шаблонные файлы настроек могут не быть созданы командой debmake. В таких случаях вам следует создать их с помощью редактора. * Some configuration template files generated by the debmake command with an extra .ex suffix need to be activated by removing that suffix. * Неиспользуемые шаблонные файлы настроек, созданные командой debmake, следует удалить. * Копируйте шаблонные файлы настроек по необходимости в файлы с соответствующими именами двоичных пакетов. двоичныйпакет.bug-control ^-x3 устанавливается как usr/share/bug/двоичныйпакет/control в двоичныйпакет. См. «Раздел 8.11, «Bug reports»». двоичныйпакет.bug-presubj ^-x3 устанавливается как usr/share/bug/двоичныйпакет/presubj в binarypackage. См. «Раздел 8.11, «Bug reports»». двоичныйпакет.bug-script ^-x3 устанавливается как usr/share/bug/двоичныйпакет или usr/ share/bug/двоичныйпакет/script в двоичныйпакет. См. « Раздел 8.11, «Bug reports»». binarypackage.bash-completion ^-x3 List bash completion scripts to be installed. The bash-completion package is required for both build and user environments. См. dh_bash-completion(1). clean ^-x2 List files that should be removed but are not cleaned by the dh_auto_clean command. См. dh_auto_clean(1) и dh_clean(1). compat ^-x4 Set the debhelper compatibility level. (deprecated) Use «Build-Depends: debhelper-compat (= 13)» in debian/ control to specify the compatibility level and remove debian/compat. See «COMPATIBILITY LEVELS» in debhelper(7). binarypackage.conffiles ^-x3 This optional file is installed into the DEBIAN directory within the binary package while supplimenting it with all the conffiles auto-detected by debhelper. This file is primarily useful for using "special" entries such as the remove-on-upgrade feature from dpkg(1). If the program you’re packaging requires every user to modify the configuration files in the /etc directory, there are two popular ways to arrange for them not to be conffiles, keeping the dpkg command happy and quiet. # Создайте символьную ссылку в каталоге /etc, указывающую на файл в каталоге /var, создаваемый сценариями сопровождающего. # Создайте файл с помощью сценариев сопровождающего в каталоге /etc. См. dh_installdeb(1). binarypackage.config ^-x3 Это config-сценарий debconf, используемый для того, чтобы задавать пользователю любые необходимые для настройки пакета вопросы. См. «Раздел 9.22, «debconf»». двоичныйпакет.cron.hourly ^-x3 Устанавливается в файл etc/cron/hourly/двоичныйпакет в двоичныйпакет. См. dh_installcron(1) и cron(8). двоичныйпакет.cron.daily ^-x3 Устанавливается в файл etc/cron/daily/двоичныйпакет в двоичныйпакет. См. dh_installcron(1) и cron(8). двоичныйпакет.cron.weekly ^-x3 Устанавливается в файл etc/cron/weekly/двоичныйпакет в двоичныйпакет. См. dh_installcron(1) и cron(8). двоичныйпакет.cron.monthly ^-x3 Installed into the *etc/cron/monthly/*binarypackage file in binarypackage. См. dh_installcron(1) и cron(8). двоичныйпакет.cron.d ^-x3 Устанавливается в файл etc/cron.d/двоичныйпакет в двоичныйпакет. См. dh_installcron(1), cron(8) и crontab(5). двоичныйпакет.default ^-x3 Если такой файл существует, то он устанавливается в etc/ default/двоичныйпакет в двоичныйпакет. См. dh_installinit(1). binarypackage.dirs ^-x1 Содержит список каталогов, которые должны быть созданы в двоичныйпакет. См. dh_installdirs(1). Это это не требуется, поскольку все команды dh_install* автоматически создают необходимые каталоги. Используйте этот файл только в том случае, если у вас возникают какие-либо затруднения. binarypackage.doc-base ^-x1 Устанавливается как управляющий файл doc-base в двоичныйпакет. See dh_installdocs(1) and «Debian doc-base Manual ( doc-base.html)» provided by the doc-base package. binarypackage.docs ^-x1 Создержит список файлов документации для их установки в двоичныйпакет. См. dh_installdocs(1). двоичныйпакет.emacsen-compat ^-x3 Устанавливается в usr/lib/emacsen-common/packages/compat/ двоичныйпакет в binarypackage. См. dh_installemacsen(1). двоичныйпакет.emacsen-install ^-x3 Устанавливается в usr/lib/emacsen-common/packages/install /двоичныйпакет в двоичныйпакет. См. dh_installemacsen(1). двоичныйпакет.emacsen-remove ^-x3 Устанавливается в usr/lib/emacsen-common/packages/remove/ двоичныйпакет в двоичныйпакет. См. dh_installemacsen(1). двоичныйпакет.emacsen-startup ^-x3 Устанавливается в usr/lib/emacsen-common/packages/startup /двоичныйпакет в двоичныйпакет. См. dh_installemacsen(1). binarypackage.examples ^-x1 Содержит список файлов или каталогов с примерами для их установки в usr/share/doc/двоичныйпакет/examples/ в двоичныйпакет. См. dh_installexamples(1). gbp.conf ^-x1 Если этот файл существует, то он используется как файл настройки для команды gbp. См. gbp.conf(5), gbp(1) и git-buildpackage(1). binarypackage.info ^-x1 Содержит список info-файлов для их установки в двоичныйпакет. См. dh_installinfo(1). binarypackage.init ^-x4 Installed into etc/init.d/binarypackage in binarypackage. (deprecated) См. dh_installinit(1). binarypackage.install ^-x1 Содержит список файлов, которые должны быть установлены, но не устанавливаются командой dh_auto_install. См. dh_install(1) и dh_auto_install(1). binarypackage.links ^-x1 List pairs of source and destination files to be     symlinked. Each pair should be put on its own line, with the source and destination separated by whitespace. См. dh_link(1). двоичныйпакет.lintian-overrides ^-x3 Устанавливается в usr/share/lintian/overrides/ двоичныйпакет в каталоге сборки пакета. Этот файл используется для блокировки ошибочных диагностических процедур lintian. См. dh_lintian(1), lintian(1) и «Руководство пользователя Lintian». binarypackage.maintscript ^-x2 If this optional file exists, debhelper uses this as the template to generate DEBIAN/binarypackage.{pre,post} {inst,rm} files within the binary package while adding « -- "$@"» to the dpkg-maintscript-helper(1) command. See dh_installdeb(1) and «Chapter 6 - Package maintainer scripts and installation procedure» in the «Debian Policy Manual». manpage.* ^-x3 Команда debmake создаёт шаблонные файы страниц руководства. Переименуйте эти файлы соответствующим образом и обновите их содержимое. Debian Policy requires that each program, utility, and function should have an associated manual page included in the same package. Manual pages are written in nroff (1). If you are new to making a manpage, use manpage.asciidoc or manpage.1 as the starting point. binarypackage.manpages ^-x1 Содержит список страниц руководства для их установки. См. dh_installman(1). двоичныйпакет.menu (устарел, более не устанавливается) tech-ctte #741573 decided «Debian should use .desktop files as appropriate». Файл меню Debian устанавливается в usr/share/menu/ двоичныйпакет в двоичныйпакет. Информацию о формате см. в menufile(5). См. dh_installmenu(1). NEWS ^-x3 Устанавливается в usr/share/doc/двоичныйпакет/NEWS.Debian . См. dh_installchangelogs(1). patches/* Набор файлов заплат -p1, которые применяются к исходному коде основной ветки до запуска процесса сборки исходного кода. Команда debmake не создаёт файлы заплат. См. dpkg-source(1), «Раздел 4.4, «quilt setup»» и « Раздел 5.9, «Step 3 (alternatives): Modification to the upstream source»». patches/series ^-x1 Последовательность применения файлов заплат patches/*. двоичныйпакет.preinst ^-x2, двоичныйпакет.postinst ^-x2, двоичныйпакет.prerm ^-x2, двоичныйпакет.postrm ^-x2 If these optional files exist, the corresponding files are installed into the DEBIAN directory within the binary package after enriched by debhelper. Otherwise, these files in the DEBIAN directory within the binary package is generated by debhelper. Whenever possible, simpler binarypackage.maintscript should be used instead. See dh_installdeb(1) and «Chapter 6 - Package maintainer scripts and installation procedure» in the «Debian Policy Manual». See also debconf-devel(7) and «3.9.1 Prompting in maintainer scripts» in the «Debian Policy Manual». README.Debian ^-x1 Устанавливается в первый двоичный пакет, указанный в файле debian/control как usr/share/doc/двоичныйпакет/ README.Debian. Этот файл содержит специальную информацию о пакете Debian. См. dh_installdocs(1). README.source ^-x1 Installed into the first binary package listed in the debian/control file as usr/share/doc/binarypackage/ README.source. If running «dpkg-source -x» on a source package doesn’t produce the source of the package, ready for editing, and allow one to make changes and run dpkg-buildpackage to produce a modified package without taking any additional steps, creating this file is recommended. See «Debian policy manual section 4.14». двоичныйпакет.service ^-x3 Если этот файл существует, то он устанавливается в lib/ systemd/system/двоичныйпакет.service в binarypackage. См. dh_systemd_enable(1), dh_systemd_start(1) и dh_installinit(1). source/format ^-x1 Формат пакета Debian. # Use «3.0 (quilt)» to make this non-native package (recommended) # Use «3.0 (native)» to make this native package See «SOURCE PACKAGE FORMATS» in dpkg-source(1). source/lintian-overrides ^-x3 These file is not installed, but are scanned by the lintian command to provide overrides for the source package. См. dh_lintian(1) и lintian(1). source/local-options ^-x1 The dpkg-source command uses this content as its options. Notable options are: # unapply-patches # abort-on-upstream-changes # auto-commit # single-debian-patch Этот файл не добавляется в создаваемый пакет с исходным кодом и предназначен скорее для добавления в систему управления версиями, используемую сопровождающим. See «FILE FORMATS» in dpkg-source(1). source/local-patch-header ^-x1 Свободная текстовая форма, размещаемая в верхней части автоматически созданной заплаты. Этот файл не добавляется в создаваемый пакет с исходным кодом и предназначен скорее для добавления в систему управления версиями, используемую сопровождающим. See «FILE FORMATS» in dpkg-source(1). source/options ^-x3 Use source/local-options instead to avoid issues with NMUs. See «FILE FORMATS» in dpkg-source(1). source/patch-header ^-x4 Use source/local-patch-header instead to avoid issues with NMUs. See «FILE FORMATS» in dpkg-source(1). binarypackage.symbols ^-x1 Файлы символов. Если эти файлы существуют, то они будут переданы для обработки и установки команде dpkg-gensymbols. См. dh_makeshlibs(1) и «Раздел 9.16, «Библиотека символов»».. binarypackage.templates ^-x3 Это файл шаблонов для debconf. Он используется для вывода вопросов, необходимых для настройки пакета. См. « Раздел 9.22, «debconf»». tests/control ^-x1 This is the RFC822-style test meta data file defined in DEP-8. See autopkgtest(1) and «Раздел 9.4, «Непрерывная интеграция»». TODO ^-x3 Устанавливается в первый двоичный пакет, указанный в файле debian/control как usr/share/doc/двоичныйпакет/ TODO.Debian. См. dh_installdocs(1). двоичныйпакет.tmpfile ^-x3 Если этот файл существует, то он устанавливается в usr/ lib/tmpfiles.d/двоичныйпакет.conf в двоичныйпакет. См. dh_systemd_enable(1), dh_systemd_start(1) и dh_installinit(1). binarypackage.upstart ^-x4 If this exists, it is installed into etc/init/ package.conf in the package build directory. (deprecated) См. dh_installinit(1). upstream/metadata ^-x1 Per-package machine-readable metadata about upstream (DEP-12). See «Upstream MEtadata GAthered with YAml (UMEGAYA)». --------------------------------------------------------------------- ^[11] This is the default up to debhelper v13. At debhelper v14,     it warns the default change. After debhelper v15, it will change the default to DESTDIR=debian/tmp/ . ^[12] Для более чем 90% пакетов длина имени пакета равна 24     символам или меньше этого числа; длина версии основной ветки равна 10 символам или меньше, а длина номера редакции Debian равна 3 символам или меньше.     ^[13] Команда debmake создаёт несколько более сложный файл debian /rules. Тем не менее, это базовая часть. ^[14] This simplicity is available since version 7 of the     debhelper package. This guide assumes the use of debhelper version 13 or newer. ^[15] This is the default up to debhelper v13. At debhelper v14,     it warns the default change. After debhelper v15, it will change the default to DESTDIR=debian/tmp/ .     ^[16] If you are using the vim editor, make sure to save this with the «:wq» command. Глава 7. Sanitization of the source     There are a few cases which require to sanitize the source to prevent contaminating the generated Debian source package. * Non DFSG contents in the upstream source. + Debian takes software freedom seriously and follows the DFSG. * Extraneous auto-generated contents in the upstream source. + Debian package should rebuild them under the latest system.     * Extraneous VCS contents in the upstream source. + The -i and -I options set in «Раздел 4.5, «devscripts setup»» for the dpkg-source(1) command should avoid these. o The -i option is aimed at the non-native Debian package. o The -I is aimed at the native Debian package.     There are several methods to avoid inclusion of undesirable contents. 7.1. Fix with Files-Excluded     This is suitable for avoiding non DFSG contents in the upstream source tarball. * Укажите список файлов для удаления в строке Files-Excluded файла debian/copyright. * Укажите URL для загрузки tar-архива основной ветки в файле debian/watch. * Запустите команду uscan для загрузки нового tar-архива основной ветки.     + Alternatively, use the «gbp import-orig --uscan --pristine-tar» command. * mk-origtargz invoked from uscan removes excluded files from the upstream tarball and repack it as a clean tarball. * Получившийся tar-архив будет иметь версию с дополнительным суффиком +dfsg.     See «COPYRIGHT FILE EXAMPLES» in mk-origtargz(1). 7.2. Fix with «debian/rules clean»     This is suitable for avoiding auto-generated files and removes them in the «debian/rules clean» target Примечание     The «debian/rules clean» target is called before the «dpkg-source --build» command by the dpkg-buildpackage command and the « dpkg-source --build» command ignores removed files. 7.3. Fix with extend-diff-ignore     This is for the non-native Debian package. The problem of extraneous diffs can be fixed by ignoring changes     made to parts of the source tree by adding the « extend-diff-ignore=…​» line in the debian/source/options file. debian/source/options to exclude the config.sub, config.guess and Makefile files:      # Don't store changes on autogenerated files extend-diff-ignore = "(^|/)(config\.sub|config\.guess|Makefile)$" Примечание     Этот подход работает всегда, даже если вы не можете удалить файл. Поэтому он позволяет вам не делать резервную копию неизменённого файла только для того, чтобы восстановить его для выполнения следующей сборки. Подсказка Если используется файл debian/source/local-options, то можно     скрыть эти настройки из создаваемого пакета с исходным кодом. Это может быть полезно в том случае, когда локальные нестандартные файлы системы управления версиями вмешиваются в процесс создания вашего пакета. 7.4. Fix with tar-ignore     This is for the native Debian package. You can exclude some files in the source tree from the generated     tarball by tweaking the file glob by adding the «tar-ignore=…​» lines in the debian/source/options or debian/source/local-options files. Примечание If, for example, the source package of a native package needs files with the file extension .o as a part of the test data, the     setting in «Раздел 4.5, «devscripts setup»» is too aggressive. You can work around this problem by dropping the -I option for DEBUILD_DPKG_BUILDPACKAGE_OPTS in «Раздел 4.5, «devscripts setup» » while adding the «tar-ignore=…​» lines in the debian/source/ local-options file for each package. 7.5. Fix with «git clean -dfx» The problem of extraneous contents in the second build can be     avoided by restoring the source tree by committing the source tree to the Git repository before the first build.     Вы можете восстановить дерево исходного кода до выполнения второй сборки. Например:     $ git reset --hard $ git clean -dfx This works because the dpkg-source command ignores the contents     of the typical VCS files in the source tree with the DEBUILD_DPKG_BUILDPACKAGE_OPTS setting in `"Раздел 4.5, « devscripts setup»`". Подсказка     If the source tree is not managed by a VCS, you should run «git init; git add -A .; git commit» before the first build. Глава 8. More on packaging     Let’s describe more basics on Debian packaging. 8.1. Package customization All customization data for the Debian source package resides in     the debian/ directory as presented in «Раздел 5.7, «Шаг 3: изменение шаблонных файлов»»: * The Debian package build system can be customized through the debian/rules file (see «Раздел 8.2, «Customized debian/rules» »).     * The Debian package installation path etc. can be customized through the addition of configuration files such as package .install and package.docs in the debian/ directory for the dh_* commands from the debhelper package (see «Раздел 6.14, «Other debian/* files»»). When these are not sufficient to make a good Debian package, -p1 patches of debian/patches/* files are deployed to modify the     upstream source. These are applied in the sequence defined in the debian/patches/series file before building the package as presented in «Раздел 5.9, «Step 3 (alternatives): Modification to the upstream source»». You should address the root cause of the Debian packaging problem     by the least invasive way. The generated package shall be more robust for future upgrades in this way. Примечание     Send the patch addressing the root cause to the upstream maintainer if it is useful to the upstream. 8.2. Customized debian/rules Flexible customization of the Раздел 6.5, «debian/rules file» is     realized by adding appropriate override_dh_* targets and their rules. Всякий раз как требуется выполнить какую-то специальную операцию     для определённой команды dh_foo, вызываемой командой dh, всякое автоматическое выполнение её может быть отменено путём добавления Makefile-цели override_dh_foo в файл debian/rules. The build process may be customized via the upstream provided     interface such as arguments to the standard source build system commands, such as: * configure,     * Makefile, * «python -m build», or * Build.PL. If this is the case, you should add the override_dh_auto_build     target with «dh_auto_build -- arguments». This ensures passing arguments to the build system after the default parameters that dh_auto_build usually passes. Подсказка     Please try not to execute the bare build system commands directly if they are supported by the dh_auto_build command.     См.: * «Раздел 5.7, «Шаг 3: изменение шаблонных файлов»» for the basic example. * «Раздел 9.3, «Note on build system»» to be reminded of the     challenge involving the underlying build system. * «Раздел 9.10, «Multiarch»» for multiarch customization. * «Раздел 9.6, «Усиление безопасности компилятора»» for hardening customization. 8.3. Variables for debian/rules Некоторые определения переменных, которые могут оказаться     полезными для debian/rules, можно найти в файлах в каталоге /usr/ share/dpkg/. В частности: pkg-info.mk Set DEB_SOURCE, DEB_VERSION, DEB_VERSION_EPOCH_UPSTREAM, DEB_VERSION_UPSTREAM_REVISION, DEB_VERSION_UPSTREAM, and DEB_DISTRIBUTION variables obtained from dpkg-parsechangelog (1). (useful for backport support etc..) vendor.mk Set DEB_VENDOR and DEB_PARENT_VENDOR variables; and     dpkg_vendor_derives_from macro obtained from dpkg-vendor(1). (useful for vendor support (Debian, Ubuntu, …​).) architecture.mk Set DEB_HOST_* and DEB_BUILD_* variables obtained from dpkg-architecture(1). buildflags.mk Set CFLAGS, CPPFLAGS, CXXFLAGS, OBJCFLAGS, OBJCXXFLAGS, GCJFLAGS, FFLAGS, FCFLAGS, and LDFLAGS build flags obtained from dpkg-buildflags(1).     Например, можно добавить дополнительную опцию в CONFIGURE_FLAGS для архитектур linux-any, добавляя следующее в файл debian/rules: DEB_HOST_ARCH_OS ?= $(shell dpkg-architecture -qDEB_HOST_ARCH_OS) ...     ifeq ($(DEB_HOST_ARCH_OS),linux) CONFIGURE_FLAGS += --enable-wayland endif     См. «Раздел 9.10, «Multiarch»», dpkg-architecture(1) и dpkg-buildflags(1). 8.4. Новый выпуск основной ветки When a new upstream release tarball foo-newvwesion.tar.gz is     released, the Debian source package can be updated by invoking commands in the old source tree as: $ uscan     ... foo-newversion.tar.gz downloaded $ uupdate -v newversion ../foo-newversion.tar.gz * The debian/watch file in the old source tree must be a valid one. * This make symlink ../foo_newvwesion.orig.tar.gz pointing to     ../foo-newvwesion.tar.gz. * Files are extracted from ../foo-newvwesion.tar.gz to ../foo- newversion/ * Files are copied from ../foo-oldversion/debian/ to ../foo- newvesion/debian/ . After the above, you should refresh debian/patches/* files (see «     Раздел 8.5, «Manage patch queue with dquilt»») and update debian/ changelog with the dch(1) command. When «debian uupdate» is specified at the end of line in the     debian/watch file, uscan automatically executes uupdate(1) after downloading the tarball. 8.5. Manage patch queue with dquilt     You can add, drop, and refresh debian/patches/* files with dquilt to manage patch queue. * Add a new patch debian/patches/bugname.patch recording the upstream source modification on the file buggy_file as: $ dquilt push -a $ dquilt new bugname.patch $ dquilt add buggy_file $ vim buggy_file ... $ dquilt refresh $ dquilt header -e $ dquilt pop -a * Drop (== disable) an existing patch     + Comment out pertinent line in debian/patches/series + Erase the patch itself (optional) * Refresh debian/patches/* files to make «dpkg-source -b» work as expected after updating a Debian package to the new upstream release. $ uscan; uupdate # updating to the new upstream release $ while dquilt push; do dquilt refresh ; done $ dquilt pop -a + If conflicts are encountered with «dquilt push» in the above, resolve them and run «dquilt refresh» manually for each of them. 8.6. Build commands     Here is a recap of popular low level package build commands. There are many ways to do the same thing. * dpkg-buildpackage = ядро инструмента для сборки пакета * debuild = dpkg-buildpackage + lintian (сборка с очищенными     переменными окружения) * schroot = core of the Debian chroot environment tool * sbuild = dpkg-buildpackage on custom schroot (build in the chroot) 8.7. Note on sbuild The sbuild(1) command is a wrapper script of dpkg-buildpackage     which builds Debian binary packages in a chroot environment managed by the schroot(1) command. For example, building for Debian unstable suite can be done as:     $ sudo sbuild -d unstable In schroot(1) terminology, this builds a Debian package in a     clean ephemeral chroot «chroot:unstable-amd64-sbuild» started as a copy of the clean minimal persistent chroot « source:unstable-amd64-sbuild». This build environment was set up as described in «Раздел 4.6, «     sbuild setup»» with «sbuild-debian-developer-setup -s unstable» which essentially did the following: $ sudo mkdir -p /srv/chroot/dist-amd64-sbuild     $ sudo sbuild-createchroot unstable /srv/chroot/unstable-amd64-sbuild http://deb.debian.org/debian $ sudo usermod -a -G sbuild $ sudo newgrp - The schroot(1) configuration for unstable-amd64-sbuild was     generated at /etc/schroot/chroot.d/unstable-amd64-sbuild.$suffix : [unstable-amd64-sbuild] description=Debian sid/amd64 autobuilder groups=root,sbuild     root-groups=root,sbuild profile=sbuild type=directory directory=/srv/chroot/unstable-amd64-sbuild union-type=overlay     Где: * The profile defined in the /etc/schroot/sbuild/ directory is used to setup the chroot environment.     * /srv/chroot/unstable-amd64-sbuild directory holds the chroot filesystem. * /etc/sbuild/unstable-amd64-sbuild is symlinked to /srv/chroot /unstable-amd64-sbuild .     You can update this source chroot «source:unstable-amd64-sbuild» by:     $ sudo sbuild-update -udcar unstable     You can log into this source chroot «source:unstable-amd64-sbuild » by:     $ sudo sbuild-shell unstable Подсказка     If your source chroot filesystem is missing packages such as libeatmydata1, ccache, and lintian for your needs, you may want to install these by logging into it. 8.8. Special build cases The orig.tar.gz file may need to be uploaded for a Debian     revision other than 0 or 1 under some exceptional cases (e.g., for a security upload). When an essential package becomes a non-essential one (e.g.,     adduser), you need to remove it manually from the existing chroot environment for its use by piuparts. 8.9. Загрузите orig.tar.gz При первой загрузке пакета в архив вам следует включить в     загрузку также и архив с оригинальным исходным кодом, orig.tar.gz . Если номер редакции Debian вашего пакета не является 1 или 0, то     это происходит по умолчанию. В противном случае, вам следует передать опцию -sa команде dpkg-buildpackage. * dpkg-buildpackage -sa     * debuild -sa * sbuild * For «gbp buildpackage», edit the ~/.gbp.conf file. Подсказка     С другой стороны использование опции -sd приведёт к тому, что архив с оригинальным исходным кодом, orig.tar.gz, будет включён в загрузку. Подсказка     Security uploads require including the orig.tar.gz file. 8.10. Пропущенные загрузки Если вы создаёте несколько записей в файле debian/changelog и пропускаете загрузки, то вам следует создать соответствующий файл     *_.changes, включающий все изменения с последней загрузки. Это можно сделать, передав dpkg-buildpackage опцию -v с указанием последней загруженной версии, например, 1.2. * dpkg-buildpackage -v1.2 * debuild -v1.2     * sbuild --debbuildopts -v1.2 * При использовании gbp buildpackage отредактируйте файл ~ /.gbp.conf. 8.11. Bug reports     The reportbug(1) command used for the bug report of binarypackage can be customized by the files in usr/share/bug/binarypackage/.     Команда dh_bugfiles устанавливает эти файлы из шаблонных файлов в каталоге debian/. * debian/двоичныйпакет.bug-control → usr/share/bug/ двоичныйпакет/control + Этот файл содержит некоторые указания, такие как перенаправления отчёта об ошибке другому пакету. * debian/двоичныйпакет.bug-presubj → usr/share/bug/ двоичныйпакет/presubj     + Этот файл отображается пользователю с помощью команды reportbug. * debian/двоичныйпакет.bug-script → usr/share/bug/двоичныйпакет или usr/share/bug/двоичныйпакет/script + Команда reportbug запускает этот сценарий для создания шаблонного файла для отчёта об ошибке.     See dh_bugfiles(1) and «reportbug’s Features for Developers ( README.developers)» Подсказка     If you always remind the bug reporter of something or ask them about their situation, use these files to automate it. Глава 9. Продвинутые темы работы над пакетом     Let’s describe advanced topics on Debian packaging. 9.1. Historical perspective     Let me oversimplify historical perspective of Debian packaging practices focused on the non-native packaging. Debian was started in 1990s when upstream packages were available     from public FTP sites such as Sunsite. In those early days, Debian packaging used Debian source format currently known as the Debian source format «1.0»: * The Debian source package ships a set of files for the Debian source package. + package_version.orig.tar.gz : symlink to or copy of the     upstream released file. + package_version-revision.diff.gz : «One big patch» for Debian modifications. + package_version-revision.dsc : package description. * Several workaround approaches such as dpatch, dbs, or cdbs were deplyoed to manage multiple topic patches.     The modern Debian source format «3.0 (quilt)» was invented around 2008 (see «ProjectsDebSrc3.0»): * The Debian source package ships a set of files for the Debian source package. + package_version.orig.tar.?z : symlink to or copy of the upstream released file. + package_version-revision.debian.tar.?z : tarball of debian/ for Debian modifications.     o The debian/source/format file contains «3.0 (quilt)». o Optional multiple topic patches are stored in the debian/patches/ directory. + package_version-revision.dsc : package description. * The standarized approach to manage multiple topic patches using quilt(1) is deployed for the Debian source format «3.0 (quilt)».     Most Debian packages adopted the Debian source formats «3.0 (quilt)» and «3.0 (native)». Now, the git(1) is popular with upstream and Debian developers.     The git and its associated tools are important part of the modern Debian packaging workflow. This modern workflow involving git will be mentioned later in «Глава 10, Packaging with git». 9.2. Current trends     Current Debian packaging practices and their trends are moving target. See: * «Debian Trends» — Hints for «De facto standard» of Debian practices + Build systems: dh + Debian source format: «3.0 (quilt)» + VCS: git     + VCS Hosting: salsa + Rules-Requires-Root: adopted, fakeroot + Copyright format: DEP-5 * «debhelper-compat-upgrade-checklist(7) manpage» — Upgrade checklist for debhelper * «DEP - Debian Enhancement Proposals» — Formal proposals to enhance Debian     You can also search entire Debian source code data by yourself, too. * «Debian Sources» — code search tool     + «Debian Code Search» — wiki page describing its usage * «Debian Code Search» — another code search tool 9.3. Note on build system Auto-generated files of the build system may be found in the     released upstream tarball. These should be regenerated when Debian package is build. E.g.:     * «dh $@ --with autoreconf» should be used in the debian/rules if Autotools (autoconf + automake) are used. Some modern build system may be able to download required source codes and binary files from arbitrary remote hosts to satisfy     build requirements. Don’t use this download feature. The official Debian package is required to be build only with packages listed in Build-Depends: of the debian/control file. 9.4. Непрерывная интеграция The dh_auto_test(1) command is a debhelper command that tries to     automatically run the test suite provided by the upstream developer during the Debian package building process. The autopkgtest(1) command can be used after the Debian package     building process. It tests generated Debian binary packages in the virtual environment using the debian/tests/control RFC822-style metadata file as continuous integration (CI). See: * Documents in the /usr/share/doc/autopkgtest/ directory     * «4. autopkgtest: Automatic testing for packages» of the « Ubuntu Packaging Guide»     Кроме того, в Debian существует ещё несколько других инструментов непрерывной интеграции. * The Salsa offers «Раздел 10.3, «Salsa CI service»». * The debci package: CI platform on top of the autopkgtest     package * Пакет jenkins: платформа непрерывной интеграции общего назначения 9.5. Предзагрузка Debian cares about supporting new ports or flavours. The new ports or flavours require bootstrapping operation for the     cross-build of the initial minimal native-building system. In order to avoid build-dependency loops during bootstrapping, the build-dependency needs to be reduced using the DEB_BUILD_PROFILES environment variable.     See Debian wiki: «BuildProfileSpec». Подсказка     If a core package foo build depends on a package bar with deep build dependency chains but bar is only used in the test target in foo, you can safely mark the bar with in the Build-depends of foo to avoid build loops. 9.6. Усиление безопасности компилятора     The compiler hardening support spreading for Debian jessie (8.0) demands that we pay extra attention to the packaging.     Вам следует подробно изнакомиться со следующей справочной документацией:     * Debian wiki: «Hardening» * Debian wiki: «Hardening Walkthrough» Команда debmake добавляет шаблонные комментарии в файл debian/     rules, требующиеся для DEB_BUILD_MAINT_OPTIONS, DEB_CFLAGS_MAINT_APPEND и DEB_LDFLAGS_MAINT_APPEND (см. «Глава 5, Simple packaging» и dpkg-buildflags(1)). 9.7. Повторяемая сборка     Here are some recommendations to attain a reproducible build result. * Не включайте в результат временную метку на основе системного времени. * Don’t embed the file path of the build environment. * Use «dh $@» in the debian/rules to access the latest debhelper features. * Export the build environment as «LC_ALL=C.UTF-8» (see « Раздел 11.1, «Сборка с использованием кодировки UTF-8»»).     * Set the timestamp used in the upstream source from the value of the debhelper-provided environment variable $SOURCE_DATE_EPOCH. * Подробности можно найти на вики-странице «ReproducibleBuilds» . + «Руководство ReproducibleBuilds». + «ReproducibleBuilds TimestampsProposal». Управляющий файл     имя-исходного-кода_версия-исходного-кода_архитектура.buildinfo, создаваемый dpkg-genbuildinfo(1), содержит информацию о сборочном окружении. См. deb-buildinfo(5) 9.8. Переменные подстановки Кроме того, файл debian/control определяет зависимости пакета, в которых может исопльзоваться «механизм подстановки переменных»     (substvar), который освобождает сопровождающих пакета от рутинной работы по отслеживанию большинства простых зависимостей пакета. См. deb-substvars(5).     The debmake command supports the following substvars: * ${misc:Depends} для всех двоичных пакетов * ${misc:Pre-Depends} для всех мультиархитектурных пакетов * ${shlibs:Depends} для всех двоичных пакетов с исполняемыми     файлами и пакетов библиотек * ${python:Depends} для всех пакетов с кодом на языке Python * ${python3:Depends} для всех пакетов с кодом на языке Python3 * ${perl:Depends} для всех пакетов с кодом на языке Perl * ${ruby:Depends} для всех пакетов с кодом на языке Ruby For the shared library, required libraries found simply by «     objdump -p /path/to/program | grep NEEDED» are covered by the shlib substvar. For Python and other interpreters, required modules found simply     looking for lines with «import», «use», «require», etc., are covered by the corresponding substvars.     Для остальных программ, не использующих собственные переменные подстановки, зависимости обрабатываются переменной misc. Для программ командной оболочки POSIX нет простого способа     определения зависимостей, поэтому их зависимости не обрабатываются никакой переменной. Для библиотек и модулей, требующихся через механизм динамической     загрузки, включая механизм «GObject-интроспекция», нет простого способа определения зависимостей, поэтому их зависимости не обрабатываются никакой переменной. 9.9. Пакет библиотеки Packaging library software requires you to perform much more work     than usual. Here are some reminders for packaging library software: * The library binary package must be named as in «Раздел 9.17, «Library package name»». * Debian ships shared libraries such as /usr/lib//lib foo-0.1.so.1.0.0 (see «Раздел 9.10, «Multiarch»»).     * Debian encourages using versioned symbols in the shared library (see «Раздел 9.16, «Библиотека символов»»). * Debian не поставляет libtool-архивы библиотек *.la. * Debian discourages using and shipping *.a static library files.     Before packaging shared library software, see: * «Chapter 8 - Shared libraries» of the «Debian Policy Manual»     * «10.2 Libraries» of the «Debian Policy Manual» * «6.7.2. Libraries» of the «Debian Developer’s Reference»     Для получения исторических сведений обратитесь к следующей документации: * «Спасение из ада зависимостей» ^[17] + This encourages having versioned symbols in the shared     library. * «Debian Library Packaging guide» ^[18] + Please read the discussion thread following its announcement, too. 9.10. Multiarch Multiarch support for cross-architecture installation of binary packages (particularly i386 and amd64, but also other     combinations) in the dpkg and apt packages introduced in Debian wheezy (7.0, May 2013), demands that we pay extra attention to packaging.     Вам следует подробно изнакомиться со следующей справочной документацией: * Ubuntu вики (основная ветка разработки) + «MultiarchSpec»     * Debian вики (ситуация в Debian) + «Поддержка мультиархитектурности в Debian» + «Multiarch/Implementation» Мультиархитектурность включается с помощью значения <тройки> вида     i386-linux-gnu или x86_64-linux-gnu в пути установки разделяемых библиотек вида /usr/lib/<тройка>/ и т. д. * Значение <тройки>, внутренне необходимое для сценариев debhelper, устанавливается самими сценариями неявно. Сопровождающему не нужно об этом беспокоиться. * The value used in override_dh_* target scripts must be explicitly set in the debian/rules file by the maintainer. The value is stored in the $(DEB_HOST_MULTIARCH) variable     in the following debian/rules snippet example: DEB_HOST_MULTIARCH = $(shell dpkg-architecture -qDEB_HOST_MULTIARCH) ... override_dh_install: mkdir -p package1/lib/$(DEB_HOST_MULTIARCH) cp -dR tmp/lib/. package1/lib/$(DEB_HOST_MULTIARCH)     См.: * «Раздел 8.3, «Variables for debian/rules»»     * «Раздел 15.2, «debmake -b»» * «Раздел 9.12, «Сценарии и примеры разделения пакета»» * «dpkg-architecture(1) manpage» 9.11. Split of a Debian binary package     For well behaving build systems, the split of a Debian binary package into small ones can be realized as follows. * Создайте записи с определениями метаданных двоичных пакетах в     файле debian/control для всех двоичных пакетов. * Укажите все пути к файлам (относительно каталга debian/tmp) в соответствующих файлах debian/двоичныйпакет.install.     С примерами можно ознакомиться в настоящем руководстве: * «Раздел 13.11, «Autotools (multi-binary package)»» (на основе     Autotools) * «Раздел 13.12, «CMake (multi-binary package)»» (на основе CMake) An intuitive and flexible method to create the initial template     debian/control file defining the split of the Debian binary packages is accommodated with the -b option. See «Раздел 15.2, « debmake -b»». 9.12. Сценарии и примеры разделения пакета Ниже приводится несколько типичных сценариев разделения     мультиархитектурного пакета для следующих примеров исходного кода основной ветки разработки, в которых используется команда debmake : * исходный код библиотеки libfoo-1.0.tar.gz * исходный код утилиты bar-1.0.tar.gz, написанный на     компилируемом языке * исходный код утилиты baz-1.0.tar.gz, написанный на интерпретируемом языке +---------------------------------------------------------------+ |двоичныйпакет| тип |Architecture:|Multi-Arch:| Содержимое | | | | | | пакета | |-------------+------+-------------+-----------+----------------| |libfoo1 |lib^* |any |same |разделяемая | | | | | |бибиотека, | | | | | |возможна | | | | | |совместная | | | | | |установка | |-------------+------+-------------+-----------+----------------| |libfoo-dev |dev^* |any |same |заголовочные | | | | | |файлы | | | | | |разделяемой | | | | | |библиотеки и | | | | | |проч., возможна | | | | | |совместная | | | | | |установка | |-------------+------+-------------+-----------+----------------| |libfoo-tools |bin^* |any |foreign |программы с | | | | | |поддержкой | | | | | |времени | | | | | |исполнения, |     | | | | |совместная | | | | | |установка | | | | | |невозможна | |-------------+------+-------------+-----------+----------------| |libfoo-doc |doc^* |all |foreign |файлы | | | | | |документации | | | | | |разделяемой | | | | | |библиотеки | |-------------+------+-------------+-----------+----------------| |bar |bin^* |any |foreign |скомпилированный| | | | | |файлы программы,| | | | | |совместная | | | | | |устанвка | | | | | |невозможна | |-------------+------+-------------+-----------+----------------| |bar-doc |doc^* |all |foreign |файлы | | | | | |документации | | | | | |программы | |-------------+------+-------------+-----------+----------------| |baz |script|all |foreign |файлы | | | | | |интерпретируемой| | | | | |программы | +---------------------------------------------------------------+ 9.13. Multiarch library path Debian policy requires to comply with the «Filesystem Hierarchy     Standard (FHS), version 3.0», with the exceptions noted in «File System Structure». The most notable exception is the use of /usr/lib//     instead of /usr/lib/ (e.g., /lib32/ and /lib64/) to support a multiarch library. Таблица 9.1. Опции путя мультиархитектурных библиотек +---------------------------------------------------------------+ |Классический |Мультиархитектурный путь|Мультиархитектуный путь | | путь | для i386 | для amd64 |     |-------------+------------------------+------------------------| |/lib/ |/lib/i386-linux-gnu/ |/lib/x86_64-linux-gnu/ | |-------------+------------------------+------------------------| |/usr/lib/ |/usr/lib/i386-linux-gnu/|/usr/lib/ | | | |x86_64-linux-gnu/ | +---------------------------------------------------------------+ Для пакетов на основе Autotools, в которых используется пакет     debhelper с (compat>=9), установка этого пути выполняется автоматически с помощью команды dh_auto_configure. При работе с другими пакетами, использующими неподдерживаемые     системы сборки, вам следует вручную изменить путь установки указанным ниже способом. * If «./configure» is used in the override_dh_auto_configure target in debian/rules, make sure to replace it with «     dh_auto_configure --» while re-targeting the install path from /usr/lib/ to /usr/lib/$(DEB_HOST_MULTIARCH)/. * Замените все пути с /usr/lib/ на /usr/lib/*/ в файлах debian/ foo.install. All files installed simultaneously as the multiarch package to     the same file path should have exactly the same file content. You must be careful with differences generated by the data byte order and by the compression algorithm. Файлы разделяемых библиотек, расположенные в каталогах по     умолчанию, /usr/lib/ и /usr/lib/<тройка>/, загружаются автоматически.     For shared library files in another path, the GCC option -l must be set by the pkg-config command to make them load properly. 9.14. Multiarch header file path     В мультиархитектурной системе Debian GCC по умолчанию включает и /usr/include/, и /usr/include/<тройка>/. If the header file is not in those paths, the GCC option -I must     be set by the pkg-config command to make "#include " work properly. Таблица 9.2. Опции пути мультиархитектурного заголовочного файла +---------------------------------------------------------------+ | Классический | Мультиархитектурный |Мультиархитектуный путь | | путь | путь для i386 | для amd64 | |--------------+-----------------------+------------------------| |/usr/include/ |/usr/include/ |/usr/include/ | | |i386-linux-gnu/ |x86_64-linux-gnu/ |     |--------------+-----------------------+------------------------| |/usr/include/ |/usr/include/ |/usr/include/ | |имяпакета/ |i386-linux-gnu/ |x86_64-linux-gnu/ | | |имяпакета/ |имяпакета/ | |--------------+-----------------------+------------------------| |  |/usr/lib/i386-linux-gnu|/usr/lib/ | | |/имяпакета/ |x86_64-linux-gnu/ | | | |имяпакета/ | +---------------------------------------------------------------+ The use of the /usr/lib//packagename/ path for the     library files allows the upstream maintainer to use the same install script for the multiatch system with /usr/lib/ and the biarch system with /usr/lib/. ^[19] The use of the file path containing packagename enables having     more than 2 development libraries simultaneously installed on a system. 9.15. Multiarch *.pc file path Программа pkg-config используется для получения информации об     установленных в системе библиотеках. Она сохраняет свои параметры настройки в файле *.pc и используется для установки опций -I и -l для GCC. Таблица 9.3. Опции пути к файлу *.pc +---------------------------------------------------------------+ |Классический | Мультиархитектурный | Мультиархитектуный путь |     | путь | путь для i386 | для amd64 | |-------------+-----------------------+-------------------------| |/usr/lib/ |/usr/lib/i386-linux-gnu|/usr/lib/x86_64-linux-gnu| |pkgconfig/ |/pkgconfig/ |/pkgconfig/ | +---------------------------------------------------------------+ 9.16. Библиотека символов The symbols support in dpkg introduced in Debian lenny (5.0, May 2009) helps us to manage the backward ABI compatibility of the     library package with the same package name. The DEBIAN/symbols file in the binary package provides the minimal version associated with each symbol.     An oversimplified method for the library packaging is as follows. * Extract the old DEBIAN/symbols file of the immediate previous binary package with the «dpkg-deb -e» command. + Либо можно использовать команду mc для распаковки файла DEBIAN/symbols. * Скопируйте его в файл debian/двоичныйпакет.symbols. + Если это первый пакет, то используйте пустой файл. * Соберите двоичный пакет. + If the dpkg-gensymbols command warns about some new     symbols: o Extract the updated DEBIAN/symbols file with the « dpkg-deb -e» command. o Удалите номер редакции версии Debian, например, -1, из файла. o Скопируйте его в файл debian/двоичныйпакет.symbols. o Повторно соберите двоичный пакет. + If the dpkg-gensymbols command does not warn about new symbols: o Работа с библиотекой завершена.     Подробные сведения можно получить, обратившись к следующей справочной информации: * «8.6.3 The symbols system» of the «Debian Policy Manual» * «dh_makeshlibs(1) manapage»     * «dpkg-gensymbols(1) manapage» * «dpkg-shlibdeps(1) manapage» * «deb-symbols(5) manapage»     Также следует ознакомиться со следующей документацией: * Debian wiki: «UsingSymbolsFiles» * Debian wiki: «Projects/ImprovedDpkgShlibdeps»     * Debian kde team: «Working with symbols files» * «Раздел 13.11, «Autotools (multi-binary package)»» * «Раздел 13.12, «CMake (multi-binary package)»» Подсказка For C++ libraries and other cases where the tracking of symbols     is problematic, follow «8.6.4 The shlibs system» of the «Debian Policy Manual», instead. Please make sure to erase the empty debian/binarypackage.symbols file generated by the debmake command. For this case, the DEBIAN/shlibs file is used. 9.17. Library package name Let’s consider that the upstream source tarball of the libfoo     library is updated from libfoo-7.0.tar.gz to libfoo-8.0.tar.gz with a new SONAME major version which affects other packages. Двоичный пакет библиотеки следует переименовать с libfoo7 в lib     foo8, чтобы после загрузки пакета, созданного из на осно, в unstable все зависимые пакеты остались в рабочем состоянии. Предупреждение If the binary library package isn’t renamed, many dependent     packages in the unstable suite become broken just after the library upload even if a binNMU upload is requested. The binNMU may not happen immediately after the upload due to several reasons.     Пакет -dev должен соответствовать следующим правилам именования: * Используйте имя пакета -dev без номера версии: libfoo-dev + This is the typical one for leaf library packages. + В архиве может находится только одна версия пакета с исходным кодом библиотеки. o The associated library package needs to be renamed from libfoo7 to libfoo8 to prevent dependency breakage in the unstable suite during the library transition. + This approach should be used if the simple binNMU resolves the library dependency quickly for all affected packages. (ABI change by dropping the deprecated API while keeping the active API unchanged.) + This approach may still be a good idea if manual code updates, etc. can be coordinated and manageable within limited packages. (API change) * Используйте имена пакетов -dev с указанием версии: libfoo7 -dev и libfoo8-dev     + This is typical for many major library packages. + В архиве могут находится две версии пакетов с исходным кодом библиотеки. o Все зависимые пакет должны зависить от libfoo-dev. o Пусть и libfoo7-dev, и libfoo8-dev предоставляют lib foo-dev. o Пакет с исходным кодом следует переименовать в lib foo7-7.0.tar.gz и libfoo8-8.0.tar.gz, соответственно, из libfoo-?.0.tar.gz. o В зависимости от пакета путь установки файлов, включающий libfoo7 и libfoo8, соответственно, для заголовочных файлов и проч., следует выбирать так, чтобы их можно было установить одновременно. + По возможности не используйте слишком жёсткий подход. + This approach should be used if the update of multiple dependent packages require manual code updates, etc. (API change) Otherwise, the affected packages become RC buggy with FTBFS. Подсказка     If the data encoding scheme changes (e.g., latin1 to utf-8), the same care as the API change needs to be taken.     См. «Раздел 9.9, «Пакет библиотеки»». 9.18. Смена библиотек When you package a new library package version which affects other packages, you must file a transition bug report against the     release.debian.org pseudo package using the reportbug command with the ben file and wait for the approval for its upload from the Release Team.     У команды подготовки выпуска имеется «система отслеживания переходов». См. «Transitions». Внимание     Please make sure to rename binary packages as in «Раздел 9.17, «Library package name»». 9.19. Безопасная binNMU-загрузка A «binNMU» is a binary-only non-maintainer upload performed for library transitions etc. In a binNMU upload, only the «     Architecture: any» packages are rebuilt with a suffixed version number (e.g. version 2.3.4-3 will become 2.3.4-3+b1). The « Architecture: all» packages are not built. The dependency defined in the debian/control file among binary     packages from the same source package should be safe for the binNMU. This needs attention if there are both «Architecture: any » and «Architecture: all» packages involved in it. * «Architecture: any» package: depends on «Architecture: any» foo package + Depends: foo (= ${binary:Version}) * «Architecture: any» package: depends on «Architecture: all» bar package     + Depends: bar (= ${source:Version}) * «Architecture: all» package: depends on «Architecture: any» baz package + Depends: baz (>= ${source:Version}), baz (<< $ {source:Version}.0~) 9.20. Отладочная информация The Debian package is built with the debugging information but     packaged into the binary package after stripping the debugging information as required by «Chapter 10 - Files» of the «Debian Policy Manual».     См. * «6.7.9. Best practices for debug packages» of the «Debian Developer’s Reference». * «18.2 Debugging Information in Separate Files» of the « Debugging with gdb» * «dh_strip(1) manapage»     * «strip(1) manapage» * «readelf(1) manapage» * «objcopy(1) manapage» * Debian wiki: «DebugPackage» * Debian wiki: «AutomaticDebugPackages» * Сообщение в списке рассылки debian-devel: «Информация о статусе автоматических отладочных пакетов» (2015-08-15) 9.21. -dbgsym package The debugging information is automatically packaged separately as     the debug package using the dh_strip command with its default behavior. The name of such a debug package normally has the -dbgsym suffix. * The debian/rules file shouldn’t explicitly contain dh_strip.     * Set the Build-Depends to debhelper-compat (>=13) while removing Build-Depends to debhelper in debian/control. 9.22. debconf     Пакет debconf позволяет нам настраивать пакеты в ходе их установки двуями основными способами: * неинтерактивно из предпосевных настроек программы установки Debian. * interactively from the menu interface (dialog, gnome, kde,     …​) + установка пакета: вызывается командой dpkg + установленный пакет: вызывается командой dpkg-reconfigure     Всё взаимодействие с пользователем в ходе установки пакета должны обрабатыватся системой debconf с помощью следующих файлов. * debian/binarypackage.config + Этот config-сценарий debconf используется для того, чтобы     задавать любые вопросы, необходимые для настройки пакета. * debian/двоичныйпакет.template + Этот templates-файл debconf используется для того, чтобы задавать любые вопросы, наобходимые для настройки пакета.     These debconf files are called by package configuration scripts in the binary Debian package * DEBIAN/binarypackage.preinst     * DEBIAN/binarypackage.prerm * DEBIAN/binarypackage.postinst * DEBIAN/binarypackage.postrm     See dh_installdebconf(1), debconf(7), debconf-devel(7) and «3.9.1 Prompting in maintainer scripts» in the «Debian Policy Manual». ---------------------------------------------------------------------     ^[17] Этот документ был написан до появления файла symbols. ^[18] The strong preference is to use the SONAME versioned -dev package names over the single -dev package name in «Chapter 6.     Development (-DEV) packages», which does not seem to be shared by the former ftp-master (Steve Langasek). This document was written before the introduction of the multiarch system and the symbols file. ^[19] This path is compliant with the FHS. «Filesystem Hierarchy Standard: /usr/lib : Libraries for programming and packages»     states «Applications may use a single subdirectory under /usr/lib . If an application uses a subdirectory, all architecture-dependent data exclusively used by the application must be placed within that subdirectory.» Глава 10. Packaging with git Up to «Глава 9, Продвинутые темы работы над пакетом», we focused on packaging operations without using Git or any other VCS. These     traditional packaging operations were based on the tarball released by the upstream as mentioned in «Раздел 9.1, «Historical perspective»». Currently, the git(1) command is the de-facto platform for the VCS tool and is the essential part of both upstream development     and Debian packaging activities. (See Debian wiki «Debian git packaging maintainer branch formats and workflows» for existing VCS workflows.) Примечание Since the non-native Debian source package uses «diff -u» as its     backend technology for the maintainer modification, it can’t represent modification involving symlink, file permissions, nor binary data (March 2022 discussion on debian-devel@l.d.o). Please avoid making such maintainer modifications even though these can be recorded in the Git repository. Since VCS workflows are complicated topic and there are many     practice styles, I only touch on some key points with minimal information, here. Salsa is the remote Git repository service with associated tools.     It offers the collaboration platform for Debian packaging activities using a custom GitLab application instance. See: * «Раздел 10.1, «Salsa repository»»     * «Раздел 10.2, «Salsa account setup»» * «Раздел 10.3, «Salsa CI service»»     There are 2 styles of branch names for the Git repository used for the packaging. See «Раздел 10.4, «Branch names»».     There are 2 main usage styles for the Git repository for the packaging. See:     * «Раздел 10.5, «Patch unapplied Git repository»» * «Раздел 10.6, «Patch applied Git repository»»     There are 2 notable Debian packaging tools for the Git repository for the packaging. * gbp(1) and its subcommands: + This is a tool designed to work with «Раздел 10.5, «Patch unapplied Git repository»». + See «Раздел 10.7, «Note on gbp»». * dgit(1) and its subcommands:     + This is a tool designed to work with both «Раздел 10.6, «Patch applied Git repository»» and «Раздел 10.5, «Patch unapplied Git repository»». + This contains a tool to upload Debian packages using the dgit server. + See «Раздел 10.8, «Note on dgit»». 10.1. Salsa repository It is highly desirable to host Debian source code package on     Salsa. Over 90% of all Debian source code packages are hosted on Salsa. ^[20] The exact VCS repository hosting an existing Debian source code     package can be identified by a metadata field Vcs-* which can be viewed with the apt-cache showsrc command. 10.2. Salsa account setup After signing up for an account on Salsa, make sure that the     following pages have the same e-mail address and GPG keys you have configured to be used with Debian, as well as your SSH key: * https://salsa.debian.org/-/profile/emails     * https://salsa.debian.org/-/user_settings/gpg_keys * https://salsa.debian.org/-/user_settings/ssh_keys 10.3. Salsa CI service     Salsa runs Salsa CI service as an instance of GitLab CI for « Раздел 9.4, «Непрерывная интеграция»». For every «git push» instances, tests which mimic tests run on     the official Debian package service can be run by setting Salsa CI configuration file «Раздел 6.13, «debian/salsa-ci.yml file»» as: --- include:     - https://salsa.debian.org/salsa-ci-team/pipeline/raw/master/recipes/debian.yml # Customizations here 10.4. Branch names     The Git repository for the Debian packaging should have at least 2 branches: * debian-branch to hold the current development work. + old style: master (or debian, main, latest, …​)     + DEP-14 style: debian/sid * upstream-branch to hold the upstream releases. + old style: upstream + DEP-14 style: upstream/latest     In this tutorial, old style branch names are used in examples for simplicity. Примечание     This upstream-branch may need to be created using the tarball released by the upstream independent of the upstream Git repository since it tends to contain automatically generated files. The upstream Git repository content can co-exit in the local Git     repository used for the Debian packaging by adding its copy. E.g.:     $ git remote add upstream-git $ git fetch upstream-git master:upstream-master     This allows easy cherry-picking from the upstream Git repository for bug fixes. 10.5. Patch unapplied Git repository     The patch unapplied Git repository can be summarized as: * This seems to be the traditional practice as of 2024. * The source tree matches extracted contents by «dpkg-source -x --skip-patches» of the Debian source package. + The upstream source is recorded in the Git repository without changes. + The maintainer modified contents are confined within the debian/* directory. + Maintainer changes to the upstream source are recorded in debian/patches/* files for the Debian source format «3.0 (quilt)». * This repository style is useful for all variants of traditional workflows and gdb based workflow: + «Раздел 5.7, «Шаг 3: изменение шаблонных файлов»» (no patch) + «Раздел 5.10, «Patch by «diff -u» approach»»     o debian/patches/* files can also be generated using « git format-patch», «git diff», or «gitk» from git commits in the through-away maintainer modification branch or from the upstream unreleased commits. + «Раздел 5.11, «Patch by dquilt approach»» including the last «dquilt pop -a» step + «Раздел 10.9, «Patch by «gbp-pq» approach»» * Use helper scripts such as dquilt(1) and gbp-pq(1) to manage data in debian/patches/* files. + Add .pc line to the ~/.gitignore file if dquilt is used. + Add unapply-patches and abort-on-upstream-changes lines in the debian/source/local-options file. * Use «dpkg-source -b» to build the Debian source package. * Use dput(1) to upload the Debian source package. + Use «dgit --gbp push-source» or «dgit --gbp push» instead to upload the Debian package via the dgit server (see « dgit-maint-gbp(7)»). Примечание     The debian/source/local-options and debian/source/ local-patch-header files are meant to be recorded by the git command. These aren’t included in the Debian source package. 10.6. Patch applied Git repository     The patch applied Git repository can be summarized as: * The source tree matches extracted contents by «dpkg-source -x » of the Debian source package. + The source tree is buildable and the same as what NMU     maintainers see. + The source is recorded in the Git repository with maintainer changes including the debian/ directory. + Maintainer changes to the upstream source are also recorded in debian/patches/* files for the Debian source format «3.0 (quilt)».     Use one of workflow styles: * dgit-maint-merge(7) workflow. + Use this if you don’t intend to record topic patches in the Debain source package. + Good enough for packages only with trivial modifications to the upstream. + Only choice for packages with intertwined modification histories to the upstream + Add auto-commit and single-debian-patch lines in the debian/source/local-options file + Use «git checkout upstream; git pull» to pull the new upstream commit and use «git checkout master ; git merge » to merge it to the master branch. + Use «dpkg-source -b» to build the Debian source package. + Use «dgit push-source» or «dgit push» for uploading the     Debian package via the dgit server. + See «Раздел 5.12, «Patch by «dpkg-source --auto-commit» approach»» for example. * dgit-maint-debrebase(7) workflow. + Use this if you wish to commit maintainer changes to the patch applied Git repository with the same granularity as patches of «Раздел 10.9, «Patch by «gbp-pq» approach»». + Good for packages with multiple sequenced modifications to the upstream. + Use «dgit build-source» to build the Debian source package. + Use «dgit push-source» or «dgit push» for uploading the Debian package via the dgit server. + Details of this workflow are beyond the scope of this tutorial document. See «Раздел 10.12, «Note on dgit-maint-debrebase workflow»» for more. 10.7. Note on gbp     The gbp command is provided by the git-buildpackage package. * This command is designed to manage contents of «Раздел 10.5, «Patch unapplied Git repository»» efficiently. * Use «gbp import-orig» to import the new upstream tar to the git repository. + The «--pristine-tar» option for the «git import-orig» command enables storing the upstream tarball in the same git repository. + The «--uscan» option as the last argument of the «gbp import-orig» command enables downloading and committing the new upstream tarball into the git repository. * Use «gbp import-dsc» to import the previous Debian source package to the git repository.     * Use «gbp dch» to generate the Debian changelog from the git commit messages. * Use «gbp buildpackage» to build the Debian binary package from the git repository. + The sbuild package can be used as its clean chroot build backend either by configuration or adding «--git-builder= 'sbuild -A -s --source-only-changes -v -d unstable'» * Use «gbp pull» to update the debian, upstream and pristine-tar branches safely from the remote repository. * Use «gbp pq» to manage quilt patches without using dquilt command. * Use «gbp clone REPOSITORY_URL» to clone and set up tracking branches for debian, upstream and pristine-tar. Package history management with the git-buildpackage package is     becoming the standard practice for many Debian maintainers. See more at: * «Сборка пакетов Debian с помощью git-buildpackage» * «4 tips to maintain a “3.0 (quilt)” Debian source package in a VCS»     * The systemd packaging practice documentation on «Building from source» * The workflow mentioned in dgit-maint-gbp(7) which enables to use this gbp with dgit 10.8. Note on dgit     The dgit command is provided by the dgit package. * This command is designed to manage contents of «Раздел 10.6, «Patch applied Git repository»» efficiently. + This enables to access the Debian package repository as     if it is a git remote repository. * This command supports uploading Debian packages using the dgit server from both «Раздел 10.5, «Patch unapplied Git repository»» and «Раздел 10.6, «Patch applied Git repository» ». The new dgit package offers commands to automate packaging     activities using the git repository as an alternative to still popular gbp-buildpackage. Please read their guide: * dgit-maint-merge(7) — for the Debian source format «3.0 (quilt)» package with its changes flowing both ways between the upstream Git repository and the Debian Git repository which are tightly coupled using «Раздел 10.6, «Patch applied Git repository»». * dgit-maint-debrebase(7) — for the Debian source format «3.0 (quilt)» package with its changes flowing mostly one way from     the upstream Git repository to the Debian Git repository using «Раздел 10.6, «Patch applied Git repository»». * dgit-maint-gbp(7) — for the Debian source format «3.0 (quilt) » package with its Debian Git repository which is kept usable also for people using gbp-buildpackage(1) using «Раздел 10.5, «Patch unapplied Git repository»». * dgit-maint-native(7) — for the Debian source format «3.0 (native)» package in the Debian Git repository. (No maintainer changes) The dgit(1) command can push the easy-to-trace change history to     the https://browse.dgit.debian.org/ site and can upload Debian package to the Debian repository properly without using dput(1).     The concept around dgit is beyond this tutorial document. Please start reading relevant information:     * «dgit: use the Debian archive as a git remote (2015)» * «tag2upload (2023)» 10.9. Patch by «gbp-pq» approach For «Раздел 10.5, «Patch unapplied Git repository»», you can     generate debian/patches/* files using the gbp-pq(1) command from git commits in the through-away patch-queue branch. Unlike dquilt which offers similar functionality as seen «     Раздел 5.11, «Patch by dquilt approach»» and «Раздел 8.5, «Manage patch queue with dquilt»», gbp-pq doesn’t generate .pc/* files. 10.10. Manage patch queue with gbp-pq     You can add, drop, and refresh debian/patches/* files with gbp-pq to manage patch queue. If the package is managed in «Раздел 10.5, «Patch unapplied Git     repository»» using the git-buildpackage package, you can revise the upstream source to fix bug as the maintainer and release a new Debian revision using gbp pq. * Add a new patch recording the upstream source modification on the file buggy_file as: $ git checkout master $ gbp pq import gbp:info: ... imported on 'patch-queue/master $ vim buggy_file ... $ git add buggy_file $ git commit $ gbp pq export gbp:info: On 'patch-queue/master', switching to 'master' gbp:info: Generating patches from git (master..patch-queue/master) $ git add debian/patches/* $ dch -i $ git commit -a -m "Closes: #" $ git tag debian/- * Drop (== disable) an existing patch + Comment out pertinent line in debian/patches/series     + Erase the patch itself (optional) * Refresh debian/patches/* files to make «dpkg-source -b» work as expected after updating a Debian package to the new upstream release. $ git checkout master $ gbp pq --force import # ensure patch-queue/master branch gbp:info: ... imported on 'patch-queue/master $ git checkout master $ gbp import-orig --pristine-tar --uscan ... gbp:info: Successfully imported version ?.?.? of ../packagename_?.?.?.orig.tar.gz $ gbp pq rebase ... resolve conflicts and commit to patch-queue/master branch $ gbp pq export gbp:info: On 'patch-queue/master', switching to 'master' gbp:info: Generating patches from git (master..patch-queue/master) $ git add debian/patches $ git commit -m "Update patches" $ dch -v -1 $ git commit -a -m "release -1" $ git tag debian/-1 10.11. gbp import-dscs --debsnap For Debian source packages named «» recorded in     the snapshot.debian.org archive, an initial git repository managed in «Раздел 10.5, «Patch unapplied Git repository»» with all of the Debian version history can be generated as follows.     $ gbp import-dscs --debsnap --pristine-tar 10.12. Note on dgit-maint-debrebase workflow     Here are some hints around dgit-maint-debrebase(7). ^[21] * Use «dgit setup-new-tree» to prepare the local git working repository. * The first maintainer modification commit should contain files only in the debian/ directory excluding files in the debian/ patches directory. * debian/patches/* files are generated from the maintainer modification commit history using the «dgit quilt-fixup»     command automatically invoked from «dgit build» and «dgit push». * Use «git-debrebase new-version » to rebase the maintainer modification commit history with automatically updated debian/changelog. * Use «git-debrebase conclude» to make a new pseudomerge (== « git merge -s ours») to record Debian package with clean ff-history.     See dgit-maint-debrebase(7), dgit(1) and git-debrebase(1) for more. 10.13. Quasi-native Debian packaging     The quasi-native packaging scheme packages a source without the real upstream tarball using the non-native package format. Подсказка     Some people promote this quasi-native packaging scheme even for programs written only for Debian since it helps to ease communication with the downstream distros such as Ubuntu for bug fixes etc.     This quasi-native packaging scheme involves 2 preparation steps: * Organize its source tree almost like native Debian package (see «Раздел 6.4, «Родной пакет Debian»») with debian/* files with a few exceptions: + Make debian/source/format to contain «3.0 (quilt)» instead of «3.0 (native)» .     + Make debian/changelog to contain version-revision instead of version . * Generate missing upstream tarball preferably without debian/* files. + For Debian source format «3.0 (quilt)», removal of files under debian/ directory is an optional action.     The rest is the same as the non-native packaging workflow as written in «Раздел 6.1, «Работа по созданию пакета»». Although this can be done in many ways («Раздел 15.4, «Snapshot     upstream tarball (-d, -t)»»), you can use the Git repository and «git deborig» as: $ cd /path/to/ $ dch -r ... set its -, e.g., 1.0-1 $ git tag -s debian/1.0-1     $ git rm -rf debian $ git tag -s upstream/1.0 $ git commit -m upstream/1.0 $ git reset --hard HEAD^ $ git deborig $ sbuild ---------------------------------------------------------------------     ^[20] Use of git.debian.org or alioth.debian.org are deprecated now.     ^[21] I may be incorrect, here. Глава 11. Полезные советы Please also read insightful pages linked from «Notes on Debian»     by Russ Allbery (long time Debian developer) which have best practices for advanced packaging topics. 11.1. Сборка с использованием кодировки UTF-8     Локалью по умолчанию в сборочном окружении является C.     Некоторые программы, такие как функци read из Python3, изменяют своё поведение в зависимости от текущей локали.     Adding the following code to the debian/rules file ensures building the program under the C.UTF-8 locale.     LC_ALL := C.UTF-8 export LC_ALL 11.2. Преобразование в кодировку UTF-8     If upstream documents are encoded in old encoding schemes, converting them to UTF-8 is a good idea.     Use the iconv command in the libc-bin package to convert the encoding of plain text files.     $ iconv -f latin1 -t utf8 foo_in.txt > foo_out.txt Используйте w3m(1) для преобразования HTML-файлов в обычные     текстовые файлы в кодировке UTF-8. При выполнении преобразования убедитесь, что у вас используется локаль UTF-8. $ LC_ALL=C.UTF-8 w3m -o display_charset=UTF-8 \     -cols 70 -dump -no-graph -T text/html \ < foo_in.html > foo_out.txt     Запустите эти сценарии в цели override_dh_* файла debian/rules. 11.3. Hints for Debugging Когда вы сталкиваетесь с проблемами сборки или дампом памяти     созданных двоичных программ, вам необходимо разрешить их самостоятельно. Это называется отладкой. Это слишком обширная тема, чтобы обсуждать её в настоящем     руководстве. Поэтому позвольте просто привести несколько ссылок и полезных советов по использованию типичных инструментов отладки. * Wikipedia: «core dump» + «man core» + Update the «/etc/security/limits.conf» file to include the following: * soft core unlimited + «ulimit -c unlimited» in ~/.bashrc + «ulimit -a» to check + Press Ctrl-\ or «kill -ABRT 'PID'» to make a core dump file * gdb — отладчик GNU + «info gdb» + «Debugging with GDB» in /usr/share/doc/gdb-doc/html/gdb/ index.html * strace — трассировка системных вызовов и сигналов + Используйте сценарий strace-graph из каталога /usr/share/     doc/strace/examples/, чтобы иметь удобную визуализацию в виде дерева + «man strace» * ltrace - трассировка библиотечных вызовов + «man ltrace» * «sh -n script.sh» - Syntax check of a Shell script * «sh -x script.sh» - Trace a Shell script * «python3 -m py_compile script.py» - Syntax check of a Python script * «python3 -mtrace --trace script.py» - Trace a Python script * «perl -I ../libpath -c script.pl» - Syntax check of a Perl script * «perl -d:Trace script.pl» - Trace a Perl script + Install the libterm-readline-gnu-perl package or its equivalent to add input line editing capability with history support. * lsof — вывод списка файлов, открытых процессами + «man lsof» Подсказка     The script command records console outputs. Подсказка     The screen and tmux commands used with the ssh command offer secure and robust remote connection terminals. Подсказка     A Python- and Shell-like REPL (=READ + EVAL + PRINT + LOOP) environment for Perl is offered by the reply command from the libreply-perl (new) package and the re.pl command from the libdevel-repl-perl (old) package. Подсказка     The rlwrap and rlfe commands add input line editing capability with history support to any interactive commands. E.g. «rlwrap dash -i'» . Глава 12. Tool usages     Here are some notable tools around Debian packaging. Примечание Описание в этом разделе слишком кратко, чтобы оно оказалось     полезным для большинства будущих сопровождающих. Это — намеренный выбор автора. Настоятельно рекомендуется поискать и прочесть всю соответствующую документация, связанную с используемыми командами. Примечание     Examples here use the gz-compression. The xz-compression may be used instead. 12.1. debdiff     Можно сравнивать содержимое файлов в двух пакетах Debian с исходным кодом с помощью команды debdiff.     $ debdiff old-package.dsc new-package.dsc     Также можно сравнивать списки файлов в двух наборах двоичных пакетов Debian с помощью команды debdiff.     $ debdiff old-package.changes new-package.changes Это полезно для определения изменений в пакетах с исходным кодом     и для проверки на предмет нечаянных изменений, привнесённых при обновлении двоичных пакетов, таких как непреднамеренное ошибочное размещение или удаление файлов.     Debian now enforces the source-only upload when developing packages. So there may be 2 different *.changes files: * package_version-revision_source.changes for the normal     source-only upload * package_version-revision_arch.changes for the binary upload 12.2. dget     Можно скачать набор файлв для пакета Debian с исходным кодом с помощью команды dget.     $ dget https://www.example.org/path/to/package_version-rev.dsc 12.3. mk-origtargz You can make the upstream tarball ../foo-newversion.tar.[xg]z     accessible from the Debian source tree as ../foo_newversion .orig.tar.[xg]z. 12.4. origtargz     You can fetch the pre-existing orig tarball of a Debian package from various sources, and unpack it with origtargz command.     This is basically for -2, -3, …​ revisions. 12.5. git deborig If the upstream project is hosted on a Git repository without the official release of tarball, you can generate its orig tarball     from the git repository for use by the Debain source package. Please, execute «git deborig» from the root of the checked-out source tree.     This is basically for -1 revisions. 12.6. dpkg-source -b     The «dpkg-source -b» command packs the upstream source tree into the Debian source package.     It expects a series of patches in the debian/patches/ directory and their application sequence in debian/patches/series. It is compatible with dquilt (see «Раздел 4.4, «quilt setup»»)     operations and understands the the patch application status from the existance of .pc/applied-patches.     The dpkg-buildpackage command invokes «dpkg-source -b». 12.7. dpkg-source -x The «dpkg-source -x» command extracts source tree and applies the patches in the debian/patches/ directory using the sequence     specified in debian/patches/series to the upstream source tree. It also adds .pc/applied-patches. (See «Раздел 10.6, «Patch applied Git repository»».) The «dpkg-source -x --skip-patches» command extracts source tree     only. It doesn’t add .pc/applied-patches. (See «Раздел 10.5, «Patch unapplied Git repository»».)     Both extracted source trees are ready for building Debian binary packages with dpkg-buildpackage, dbuild, sbuild, etc.. 12.8. debc     Созданные пакеты следуется установить с помощью команды debc для их локальной проверки.     $ debc package_version-rev_arch.changes 12.9. piuparts     Созданные пакеты следует установить с помощью команды piuparts для их автоматической проверки.     $ sudo piuparts package_version-rev_arch.changes Примечание     This is a very slow process with remote APT package repository access. 12.10. bts After uploading the package, you will receive bug reports. It is     an important duty of a package maintainer to manage these bugs properly as described in «5.8. Handling bugs» of the «Debian Developer’s Reference».     The bts command is a handy tool to manage bugs on the «Debian Bug Tracking System».     $ bts severity 123123 wishlist , tags -1 pending Глава 13. Дополнительные примеры     There is an old Latin saying: «fabricando fit faber» («practice makes perfect»). It is highly recommended to practice and experiment with all the     steps of Debian packaging with simple packages. This chapter provides you with many upstream cases for your practice.     Кроме того, это должно служит в качестве вводных примеров для множества тем по программированию. * Программирование в командной оболочке POSIX, на языках Python3 и C. * Method to create a desktop GUI program launcher with icon graphics.     * Conversion of a command from CLI to GUI. * Conversion of a program to use gettext for internationalization and localization: POSIX shell and C sources. * Overview of many build systems: Makefile, Python, Autotools, and CMake.     Please note that Debian takes a few things seriously: * Свободное ПО * Stability and security of OS * Универсальная операционная система реализуется через     + свободный выбор источников и исходных кодов основной ветки разработки, + свободный выбор архитектур ЦП, а также + свободный выбор языка пользовательского интерфейса. Знакомство с типичным примером работы над пакетом, представленным     в «Глава 5, Simple packaging», является предварительным условием для чтения данной главы. Some details are intentionally left vague in the following     sections. Please try to read the pertinent documentation and practice yourself to find them out. Подсказка     The best source of a packaging example is the current Debian archive itself. Please use the «Debian Code Search» service to find pertinent examples. 13.1. Выборочное применение шаблонов     Ниже приводится пример создания простого пакета Debian из исходного кода без какого-либо содержимого в пустом каталоге.     This is a good platform to get all the template files without making a mess in the upstream source tree you are working on.     Допустим, пустым каталогом будет debhello-0.1. $ mkdir debhello-0.1 $ tree     . └── debhello-0.1 2 directories, 0 files     Let’s generate the maximum amount of template files.     Let’s also use the «-p debhello -t -u 0.1 -r 1» options to make the missing upstream tarball with default -x3 and T options. $ cd /path/to/debhello-0.1     $ debmake -p debhello -t -u 0.1 -r 1 I: set parameters ...     Проверим созданные шаблонные файлы. $ cd /path/to $ tree . ├── debhello-0.1 │   └── debian │   ├── README.Debian │   ├── README.source │   ├── changelog │   ├── clean │   ├── control │   ├── copyright │   ├── debhello.bug-control.ex │   ├── debhello.bug-presubj.ex │   ├── debhello.bug-script.ex │   ├── debhello.conffiles.ex │   ├── debhello.cron.d.ex │   ├── debhello.cron.daily.ex │   ├── debhello.cron.hourly.ex │   ├── debhello.cron.monthly.ex │   ├── debhello.cron.weekly.ex │   ├── debhello.default.ex │   ├── debhello.emacsen-install.ex │   ├── debhello.emacsen-remove.ex │   ├── debhello.emacsen-startup.ex │   ├── debhello.lintian-overrides.ex │   ├── debhello.service.ex │   ├── debhello.tmpfile.ex │   ├── dirs │   ├── gbp.conf │   ├── install     │   ├── links │   ├── maintscript.ex │   ├── manpage.1.ex │   ├── manpage.asciidoc.ex │   ├── manpage.md.ex │   ├── manpage.sgml.ex │   ├── manpage.xml.ex │   ├── patches │   │   └── series │   ├── postinst.ex │   ├── postrm.ex │   ├── preinst.ex │   ├── prerm.ex │   ├── rules │   ├── salsa-ci.yml │   ├── source │   │   ├── format │   │   ├── lintian-overrides.ex │   │   ├── local-options.ex │   │   ├── local-patch-header.ex │   │   ├── options.ex │   │   └── patch-header.ex │   ├── tests │   │   └── control │   ├── upstream │   │   └── metadata │   └── watch ├── debhello-0.1.tar.gz └── debhello_0.1.orig.tar.gz -> debhello-0.1.tar.gz 7 directories, 50 files Теперь вы можете скопировать любой из созданных в каталоге     debhello-0.1/debian/ шаблонных файлов в ваш пакет, при необходимости их переименовав. 13.2. Без Makefile (командная оболочка, интерфейс командной оболочки) Ниже приводится пример создания простого пакета Debian из     программы с интерфесом командной оболочки, написанной для командной оболочки POSIX и не имеющей системы сборки.     Допустим tar-архив основной ветки имеет имя debhello-0.2.tar.gz.     Этот тип исходного кода не имеет средств автоматизации, и файлы должны быть установлены вручную.     For example: $ tar -xzmf debhello-0.2.tar.gz     $ cd debhello-0.2 $ sudo cp scripts/hello /bin/hello ...     Let’s get this source as tar file from a remote site and make it the Debian package. Загрузим debhello-0.2.tar.gz.  $ wget http://www.example.org/download/debhello-0.2.tar.gz ... $ tar -xzmf debhello-0.2.tar.gz $ tree . ├── debhello-0.2 │   ├── README.md     │   ├── data │   │   ├── hello.desktop │   │   └── hello.png │   ├── man │   │   └── hello.1 │   └── scripts │   └── hello └── debhello-0.2.tar.gz 5 directories, 6 files     Итак, сценарий командной оболочки POSIX hello является очень простым. hello (v=0.2).  $ cat debhello-0.2/scripts/hello     #!/bin/sh -e echo "Hello from the shell!" echo "" echo -n "Type Enter to exit this program: " read X     Here, hello.desktop supports the «Desktop Entry Specification». hello.desktop (v=0.2).  $ cat debhello-0.2/data/hello.desktop [Desktop Entry] Name=Hello Name[fr]=Bonjour     Comment=Greetings Comment[fr]=Salutations Type=Application Keywords=hello Exec=hello Terminal=true Icon=hello.png Categories=Utility;     Here, hello.png is the icon graphics file. Let’s package this with the debmake command. Here, the -b':sh'     option is used to specify that the generated binary package is a shell script. $ cd /path/to/debhello-0.2 $ debmake -b':sh' -x1 I: set parameters ... I: sanity check of parameters I: pkg="debhello", ver="0.2", rev="1" I: *** start packaging in "debhello-0.2". *** I: provide debhello_0.2.orig.tar.gz for non-native Debian package     I: pwd = "/path/to" I: $ ln -sf debhello-0.2.tar.gz debhello_0.2.orig.tar.gz I: pwd = "/path/to/debhello-0.2" I: parse binary package settings: :sh I: binary package=debhello Type=script / Arch=all M-A=foreign I: analyze the source tree I: build_type = Unknown I: scan source for copyright+license text and file extensions I: 25 %, ext = md ...     Проверим созданные шаблонные файлы. Дерево исходного кода после простого выполнения debmake. (v= 0.2).  $ cd /path/to $ tree . ├── debhello-0.2 │   ├── README.md │   ├── data │   │   ├── hello.desktop │   │   └── hello.png │   ├── debian │   │   ├── README.Debian │   │   ├── README.source │   │   ├── changelog │   │   ├── clean │   │   ├── control │   │   ├── copyright │   │   ├── dirs │   │   ├── gbp.conf │   │   ├── install     │   │   ├── links │   │   ├── patches │   │   │   └── series │   │   ├── rules │   │   ├── salsa-ci.yml │   │   ├── source │   │   │   ├── format │   │   │   ├── local-options.ex │   │   │   └── local-patch-header.ex │   │   ├── tests │   │   │   └── control │   │   ├── upstream │   │   │   └── metadata │   │   └── watch │   ├── man │   │   └── hello.1 │   └── scripts │   └── hello ├── debhello-0.2.tar.gz └── debhello_0.2.orig.tar.gz -> debhello-0.2.tar.gz 10 directories, 26 files debian/rules (шаблонный файл, v=0.2):  $ cd /path/to/debhello-0.2 $ cat debian/rules     #!/usr/bin/make -f # You must remove unused comment lines for the released package. #export DH_VERBOSE = 1 %: dh $@ По сути, это стандартный файл debian/rules, использующий команду     dh. Поскольку это пакет со сценарием, этот шаблонный файл debian/ rules не имеет содержимого, связанного с флагом сборки. debian/control (шаблонный файл, v=0.2):  $ cat debian/control Source: debhello Section: unknown Priority: optional Maintainer: "Osamu Aoki" Build-Depends: debhelper-compat (= 13) Standards-Version: 4.6.2 Homepage:     Rules-Requires-Root: no #Vcs-Git: https://salsa.debian.org/debian/debhello.git #Vcs-Browser: https://salsa.debian.org/debian/debhello Package: debhello Architecture: all Multi-Arch: foreign Depends: ${misc:Depends} Description: auto-generated package by debmake This Debian binary package was auto-generated by the debmake(1) command provided by the debmake package. Since this is the shell script package, the debmake command sets     «Architecture: all» and «Multi-Arch: foreign». Also, it sets required substvar parameters as «Depends: ${misc:Depends}». These are explained in «Глава 6, Basics for packaging». Since this upstream source lacks the upstream Makefile, that functionality needs to be provided by the maintainer. This upstream source contains only a script file and data files and no     C source files; the build process can be skipped but the install process needs to be implemented. For this case, this is achieved cleanly by adding the debian/install and debian/manpages files without complicating the debian/rules file.     Сделаем этот пакет Debian лучше. debian/rules (версия сопровождающего, v=0.2):  $ cd /path/to/debhello-0.2 $ vim debian/rules ... hack, hack, hack, ...     $ cat debian/rules #!/usr/bin/make -f export DH_VERBOSE = 1 %: dh $@ debian/control (версия сопровождающего, v=0.2):  $ vim debian/control ... hack, hack, hack, ... $ cat debian/control Source: debhello Section: devel Priority: optional Maintainer: Osamu Aoki Build-Depends: debhelper-compat (= 13)     Standards-Version: 4.6.2 Homepage: https://salsa.debian.org/debian/debmake-doc Rules-Requires-Root: no Package: debhello Architecture: all Multi-Arch: foreign Depends: ${misc:Depends} Description: Simple packaging example for debmake This Debian binary package is an example package. (This is an example only) Предупреждение     If you leave «Section: unknown» in the template debian/control file unchanged, the lintian error may cause a build failure. debian/install (версия сопровождающего, v=0.2):  $ vim debian/install     ... hack, hack, hack, ... $ cat debian/install data/hello.desktop usr/share/applications data/hello.png usr/share/pixmaps scripts/hello usr/bin debian/manpages (версия сопровождающего, v=0.2):      $ vim debian/manpages ... hack, hack, hack, ... $ cat debian/manpages man/hello.1     В каталоге debian/ имеются и другие шаблонные файлы. Их также следует обновить. Шаблонные файлы в каталоге debian/. (v=0.2):  $ rm -f debian/clean debian/dirs debian/links $ rm -f debian/README.source debian/source/*.ex $ rm -rf debian/patches $ tree -F debian debian/ ├── README.Debian ├── changelog ├── control ├── copyright ├── gbp.conf     ├── install ├── manpages ├── rules* ├── salsa-ci.yml ├── source/ │   └── format ├── tests/ │   └── control ├── upstream/ │   └── metadata └── watch 4 directories, 13 files В данном дереве исходного кода вы можете создать неродной пакет     Debian с помощью команды debuild (или её эквивалента). Вывод это команды очень подробен, в нём объясняется, что происходит, и выглядит это следующим образом. $ cd /path/to/debhello-0.2 $ debuild dpkg-buildpackage -us -uc -ui -i dpkg-buildpackage: info: source package debhello dpkg-buildpackage: info: source version 0.2-1 dpkg-buildpackage: info: source distribution unstable dpkg-buildpackage: info: source changed by Osamu Aoki dpkg-source -i --before-build . dpkg-buildpackage: info: host architecture amd64 debian/rules clean dh clean dh_clean     rm -f debian/debhelper-build-stamp ... debian/rules binary dh binary dh_update_autotools_config dh_autoreconf create-stamp debian/debhelper-build-stamp dh_prep rm -f -- debian/debhello.substvars rm -fr -- debian/.debhelper/generated/debhello/ debian/debhello/ debi... dh_auto_install --destdir=debian/debhello/ ... Finished running lintian.     Проверим результат сборки. Командой debuild были созданы следующие файлы debhello версии 0.2 :  $ cd /path/to $ tree -FL 1 ./ ├── debhello-0.2/ ├── debhello-0.2.tar.gz     ├── debhello_0.2-1.debian.tar.xz ├── debhello_0.2-1.dsc ├── debhello_0.2-1_all.deb ├── debhello_0.2-1_amd64.build ├── debhello_0.2-1_amd64.buildinfo ├── debhello_0.2-1_amd64.changes └── debhello_0.2.orig.tar.gz -> debhello-0.2.tar.gz 2 directories, 8 files     Вы видите все созданные файлы. * The debhello_0.2.orig.tar.gz file is a symlink to the upstream tarball. * The debhello_0.2-1.debian.tar.xz file contains the maintainer generated contents. * The debhello_0.2-1.dsc file is the meta data file for the     Debian source package. * The debhello_0.2-1_all.deb file is the Debian binary package. * The debhello_0.2-1_amd64.build file is the build log file. * The debhello_0.2-1_amd64.buildinfo file is the meta data file generated by dpkg-genbuildinfo(1). * The debhello_0.2-1_amd64.changes file is the meta data file for the Debian binary package.     The debhello_0.2-1.debian.tar.xz file contains the Debian changes to the upstream source as follows. Сжатое содержимое архива debhello_0.2-1.debian.tar.xz:  $ tar -tzf debhello-0.2.tar.gz debhello-0.2/ debhello-0.2/data/ debhello-0.2/data/hello.desktop debhello-0.2/data/hello.png debhello-0.2/man/ debhello-0.2/man/hello.1 debhello-0.2/scripts/ debhello-0.2/scripts/hello debhello-0.2/README.md $ tar --xz -tf debhello_0.2-1.debian.tar.xz debian/     debian/README.Debian debian/changelog debian/control debian/copyright debian/gbp.conf debian/install debian/manpages debian/rules debian/salsa-ci.yml debian/source/ debian/source/format debian/tests/ debian/tests/control debian/upstream/ debian/upstream/metadata debian/watch     The debhello_0.2-1_amd64.deb file contains the files to be installed as follows. The binary package contents of debhello_0.2-1_all.deb:  $ dpkg -c debhello_0.2-1_all.deb drwxr-xr-x root/root ... ./ drwxr-xr-x root/root ... ./usr/ drwxr-xr-x root/root ... ./usr/bin/ -rwxr-xr-x root/root ... ./usr/bin/hello drwxr-xr-x root/root ... ./usr/share/ drwxr-xr-x root/root ... ./usr/share/applications/     -rw-r--r-- root/root ... ./usr/share/applications/hello.desktop drwxr-xr-x root/root ... ./usr/share/doc/ drwxr-xr-x root/root ... ./usr/share/doc/debhello/ -rw-r--r-- root/root ... ./usr/share/doc/debhello/README.Debian -rw-r--r-- root/root ... ./usr/share/doc/debhello/changelog.Debian.gz -rw-r--r-- root/root ... ./usr/share/doc/debhello/copyright drwxr-xr-x root/root ... ./usr/share/man/ drwxr-xr-x root/root ... ./usr/share/man/man1/ -rw-r--r-- root/root ... ./usr/share/man/man1/hello.1.gz drwxr-xr-x root/root ... ./usr/share/pixmaps/ -rw-r--r-- root/root ... ./usr/share/pixmaps/hello.png     Here is the generated dependency list of debhello_0.2-1_all.deb. The generated dependency list of debhello_0.2-1_all.deb:      $ dpkg -f debhello_0.2-1_all.deb pre-depends \ depends recommends conflicts breaks     (No extra dependency packages required since this is a POSIX shell program.) Примечание If you wish to replace upstream provided PNG file data/hello.png     with maintainer provided one debian/hello.png, editing debian/ install isn’t enough. When you add debian/hello.png, you need to add a line «include-binaries» to debian/source/options since PNG is a binary file. See dpkg-source(1). 13.3. Makefile (командная оболочка, интерфейс командной оболочки) Ниже приводится пример создания простого пакета Debian из     программы с интерфесом командной оболочки, написанной для командной оболочки POSIX и использующей в качестве системы сборки Makefile.     Допустим tar-архив основной ветки имеет имя debhello-1.0.tar.gz.     Предполагается, что этот тип исходного кода будет установлен как несистемный файл: $ tar -xzmf debhello-1.0.tar.gz     $ cd debhello-1.0 $ make install Debian packaging requires changing this «make install» process to     install files to the target system image location instead of the normal location under /usr/local.     Получитм исходный код и создадим пакет Debian. Загрузим debhello-1.0.tar.gz.  $ wget http://www.example.org/download/debhello-1.0.tar.gz ... $ tar -xzmf debhello-1.0.tar.gz $ tree . ├── debhello-1.0 │   ├── Makefile     │   ├── README.md │   ├── data │   │   ├── hello.desktop │   │   └── hello.png │   ├── man │   │   └── hello.1 │   └── scripts │   └── hello └── debhello-1.0.tar.gz 5 directories, 7 files Here, the Makefile uses $(DESTDIR) and $(prefix) properly. All     other files are the same as in «Раздел 13.2, «Без Makefile (командная оболочка, интерфейс командной оболочки)»» and most of the packaging activities are the same. Makefile (v=1.0).  $ cat debhello-1.0/Makefile prefix = /usr/local all: : # do nothing install: install -D scripts/hello \ $(DESTDIR)$(prefix)/bin/hello install -m 644 -D data/hello.desktop \ $(DESTDIR)$(prefix)/share/applications/hello.desktop install -m 644 -D data/hello.png \     $(DESTDIR)$(prefix)/share/pixmaps/hello.png install -m 644 -D man/hello.1 \ $(DESTDIR)$(prefix)/share/man/man1/hello.1 clean: : # do nothing distclean: clean uninstall: -rm -f $(DESTDIR)$(prefix)/bin/hello -rm -f $(DESTDIR)$(prefix)/share/applications/hello.desktop -rm -f $(DESTDIR)$(prefix)/share/pixmaps/hello.png -rm -f $(DESTDIR)$(prefix)/share/man/man1/hello.1 .PHONY: all install clean distclean uninstall Let’s package this with the debmake command. Here, the -b':sh'     option is used to specify that the generated binary package is a shell script. $ cd /path/to/debhello-1.0 $ debmake -b':sh' -x1 I: set parameters ... I: sanity check of parameters I: pkg="debhello", ver="1.0", rev="1" I: *** start packaging in "debhello-1.0". *** I: provide debhello_1.0.orig.tar.gz for non-native Debian package     I: pwd = "/path/to" I: $ ln -sf debhello-1.0.tar.gz debhello_1.0.orig.tar.gz I: pwd = "/path/to/debhello-1.0" I: parse binary package settings: :sh I: binary package=debhello Type=script / Arch=all M-A=foreign I: analyze the source tree I: build_type = make I: scan source for copyright+license text and file extensions I: 25 %, ext = md ...     Let’s inspect the notable template files generated. debian/rules (шаблонный файл, v=1.0):  $ cd /path/to/debhello-1.0 $ cat debian/rules #!/usr/bin/make -f # You must remove unused comment lines for the released package. #export DH_VERBOSE = 1     %: dh $@ #override_dh_auto_install: # dh_auto_install -- prefix=/usr #override_dh_install: # dh_install --list-missing -X.pyc -X.pyo     Сделаем этот пакет Debian лучше. debian/rules (версия сопровождающего, v=1.0):  $ cd /path/to/debhello-1.0 $ vim debian/rules ... hack, hack, hack, ... $ cat debian/rules     #!/usr/bin/make -f export DH_VERBOSE = 1 %: dh $@ override_dh_auto_install: dh_auto_install -- prefix=/usr Since this upstream source has the proper upstream Makefile,     there is no need to create debian/install and debian/manpages files. Файл debian/control в точности совпадает с тем же файлом из     случая «Раздел 13.2, «Без Makefile (командная оболочка, интерфейс командной оболочки)»».     В каталоге debian/ имеются и другие шаблонные файлы. Их также следует обновить. Шаблонные файлы в каталоге debian/. (v=1.0):  $ rm -f debian/clean debian/dirs debian/install debian/links $ rm -f debian/README.source debian/source/*.ex $ rm -rf debian/patches $ tree -F debian debian/ ├── README.Debian ├── changelog ├── control ├── copyright     ├── gbp.conf ├── rules* ├── salsa-ci.yml ├── source/ │   └── format ├── tests/ │   └── control ├── upstream/ │   └── metadata └── watch 4 directories, 11 files The rest of the packaging activities are practically the same as     the ones in «Раздел 13.2, «Без Makefile (командная оболочка, интерфейс командной оболочки)»». 13.4. pyproject.toml (Python3, CLI)     Here is an example of creating a simple Debian package from a Python3 CLI program using pyproject.toml.     Получитм исходный код и создадим пакет Debian. Загрузим debhello-1.1.tar.gz.  $ wget http://www.example.org/download/debhello-1.1.tar.gz ... $ tar -xzmf debhello-1.1.tar.gz $ tree . ├── debhello-1.1 │   ├── LICENSE │   ├── MANIFEST.in │   ├── README.md     │   ├── data │   │   ├── hello.desktop │   │   └── hello.png │   ├── manpages │   │   └── hello.1 │   ├── pyproject.toml │   └── src │   └── debhello │   ├── __init__.py │   └── main.py └── debhello-1.1.tar.gz 6 directories, 10 files     Here, the content of this debhello source tree as follows. pyproject.toml (v=1.1) — PEP 517 configuration.  $ cat debhello-1.1/pyproject.toml [build-system] requires = ["setuptools >= 61.0"] # REQUIRED if [build-system] table is used... build-backend = "setuptools.build_meta" # If not defined, then legacy behavi... [project] name = "debhello" version = "1.1.0" description = "Hello Python (CLI)" readme = {file = "README.md", content-type = "text/markdown"} requires-python = ">=3.12" license = {file = "LICENSE.txt"} keywords = ["debhello"] authors = [ {name = "Osamu Aoki", email = "osamu@debian.org" }, ] maintainers = [ {name = "Osamu Aoki", email = "osamu@debian.org" }, ]     classifiers = [ "Development Status :: 5 - Production/Stable", "Intended Audience :: Developers", "Topic :: System :: Archiving :: Packaging", "License :: OSI Approved :: MIT License", "Programming Language :: Python :: 3", "Programming Language :: Python :: 3.12", "Programming Language :: Python :: 3 :: Only", # Others "Operating System :: POSIX :: Linux", "Natural Language :: English", ] [project.urls] "Homepage" = "https://salsa.debian.org/debian/debmake" "Bug Reports" = "https://salsa.debian.org/debian/debmake/issues" "Source" = "https://salsa.debian.org/debian/debmake" [project.scripts] hello = "debhello.main:main" [tool.setuptools] package-dir = {"" = "src"} packages = ["debhello"] include-package-data = true MANIFEST.in (v=1.1) — for tar-ball.      $ cat debhello-1.1/MANIFEST.in include data/* include manpages/* src/debhello/__init__.py (v=1.1).      $ cat debhello-1.1/src/debhello/__init__.py """ debhello program (CLI) """ src/debhello/main.py (v=1.1) — command entry point.  $ cat debhello-1.1/src/debhello/main.py """ debhello program """ import sys     __version__ = '1.1.0' def main(): # needed for console script print(' ========== Hello Python3 ==========') print('argv = {}'.format(sys.argv)) print('version = {}'.format(debhello.__version__)) return if __name__ == "__main__": sys.exit(main()) Let’s package this with the debmake command. Here, the -b':py3'     option is used to specify the generated binary package containing Python3 script and module files. $ cd /path/to/debhello-1.1 $ debmake -b':py3' -x1 I: set parameters ... I: sanity check of parameters I: pkg="debhello", ver="1.1", rev="1" I: *** start packaging in "debhello-1.1". *** I: provide debhello_1.1.orig.tar.gz for non-native Debian package     I: pwd = "/path/to" I: $ ln -sf debhello-1.1.tar.gz debhello_1.1.orig.tar.gz I: pwd = "/path/to/debhello-1.1" I: parse binary package settings: :py3 I: binary package=debhello Type=python3 / Arch=all M-A=foreign I: analyze the source tree W: setuptools build system. I: build_type = Python (pyproject.toml: PEP-518, PEP-621, PEP-660) I: scan source for copyright+license text and file extensions ...     Let’s inspect the notable template files generated. debian/rules (шаблонный файл, v=1.1):  $ cd /path/to/debhello-1.1 $ cat debian/rules     #!/usr/bin/make -f # You must remove unused comment lines for the released package. #export DH_VERBOSE = 1 %: dh $@ --with python3 --buildsystem=pybuild     По сути, это стандартный файл debian/rules, использующий команду dh. The use of the «--with python3» option invokes dh_python3 to     calculate Python dependencies, add maintainer scripts to byte compiled files, etc. See dh_python3(1). The use of the «--buildsystem=pybuild» option invokes various     build systems for requested Python versions in order to build modules and extensions. See pybuild(1). debian/control (шаблонный файл, v=1.1):  $ cat debian/control Source: debhello Section: unknown Priority: optional Maintainer: "Osamu Aoki" Build-Depends: debhelper-compat (= 13), dh-python, pybuild-plugin-pyproject, python3-all, python3-setuptools     Standards-Version: 4.6.2 Homepage: Rules-Requires-Root: no #Vcs-Git: https://salsa.debian.org/debian/debhello.git #Vcs-Browser: https://salsa.debian.org/debian/debhello #X-Python3-Version: >= 3.7 Package: debhello Architecture: all Multi-Arch: foreign Depends: ${misc:Depends}, ${python3:Depends} Description: auto-generated package by debmake This Debian binary package was auto-generated by the debmake(1) command provided by the debmake package. Since this is the Python3 package, the debmake command sets « Architecture: all» and «Multi-Arch: foreign». Also, it sets     required substvar parameters as «Depends: ${python3:Depends}, $ {misc:Depends}». These are explained in «Глава 6, Basics for packaging».     Сделаем этот пакет Debian лучше. debian/rules (версия сопровождающего, v=1.1):  $ cd /path/to/debhello-1.1 $ vim debian/rules ... hack, hack, hack, ... $ cat debian/rules     #!/usr/bin/make -f export PYBUILD_NAME=debhello export PYBUILD_VERBOSE=1 export DH_VERBOSE=1 %: dh $@ --with python3 --buildsystem=pybuild debian/control (версия сопровождающего, v=1.1):  $ vim debian/control ... hack, hack, hack, ... $ cat debian/control Source: debhello Section: devel Priority: optional Maintainer: Osamu Aoki Build-Depends: debhelper-compat (= 13), pybuild-plugin-pyproject, python3-all Standards-Version: 4.6.2     Rules-Requires-Root: no Vcs-Browser: https://salsa.debian.org/debian/debmake-doc Vcs-Git: https://salsa.debian.org/debian/debmake-doc.git Homepage: https://salsa.debian.org/debian/debmake-doc Package: debhello Architecture: all Depends: ${misc:Depends}, ${python3:Depends} Description: Simple packaging example for debmake This is an example package to demonstrate Debian packaging using the debmake command. . The generated Debian package uses the dh command offered by the debhelper package and the dpkg source format `3.0 (quilt)'.     В каталоге debian/ имеются и другие шаблонные файлы. Их также следует обновить. This debhello command comes with the upstream-provided manpage     and desktop file but the upstream pyproject.toml doesn’t install them. So you need to update debian/install and debian/manpages as follows: debian/install (maintainer version, v=1.1):  $ vim debian/copyright ... hack, hack, hack, ... $ cat debian/copyright Format: https://www.debian.org/doc/packaging-manuals/copyright-format/1.0/ Upstream-Name: debhello Upstream-Contact: Osamu Aoki Source: https://salsa.debian.org/debian/debmake-doc Files: * Copyright: 2015-2024 Osamu Aoki License: Expat Permission is hereby granted, free of charge, to any person obtaining a     copy of this software and associated documentation files (the "Software"), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions: . The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software. . THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. debian/manpages (maintainer version, v=1.1):  $ vim debian/install     ... hack, hack, hack, ... $ cat debian/install data/hello.desktop usr/share/applications data/hello.png usr/share/pixmaps The rest of the packaging activities are practically the same as     the ones in «Раздел 13.3, «Makefile (командная оболочка, интерфейс командной оболочки)»». Шаблонные файл в каталоге debian/. (v=1.1):  $ rm -f debian/clean debian/dirs debian/links $ rm -f debian/README.source debian/source/*.ex $ rm -rf debian/patches $ tree -F debian debian/ ├── README.Debian ├── changelog ├── control ├── copyright ├── gbp.conf     ├── install ├── manpages ├── rules* ├── salsa-ci.yml ├── source/ │   └── format ├── tests/ │   └── control ├── upstream/ │   └── metadata └── watch 4 directories, 13 files     Here is the generated dependency list of debhello_1.1-1_all.deb. The generated dependency list of debhello_1.1-1_all.deb:      $ dpkg -f debhello_1.1-1_all.deb pre-depends \ depends recommends conflicts breaks Depends: python3:any 13.5. Makefile (командная оболочка, графический интерфейс пользователя) Ниже приводится пример создания простого пакета Debian из     программы с графическим интерфейсом пользователя, написанной для командной оболочки POSIX и использующей в качестве системы сборки Makefile. This upstream is based on «Раздел 13.3, «Makefile (командная     оболочка, интерфейс командной оболочки)»» with enhanced GUI support.     Допустим, tar-архив основной ветки имеет имя debhello-1.2.tar.gz.     Получитм исходный код и создадим пакет Debian. Загрузим debhello-1.2.tar.gz.  $ wget http://www.example.org/download/debhello-1.2.tar.gz ... $ tar -xzmf debhello-1.2.tar.gz $ tree . ├── debhello-1.2 │   ├── Makefile     │   ├── README.md │   ├── data │   │   ├── hello.desktop │   │   └── hello.png │   ├── man │   │   └── hello.1 │   └── scripts │   └── hello └── debhello-1.2.tar.gz 5 directories, 7 files Итак, сценарий hello был переписан таким образом, чтобы для     создания графического интерфейса пользователя на основе GTK+ использовалась команда zenity. hello (v=1.2).      $ cat debhello-1.2/scripts/hello #!/bin/sh -e zenity --info --title "hello" --text "Hello from the shell!" Файл desktop должен быть обновлён и должен содержать строку     Terminal=false, поскольку эта программа имеет графический интерфейс. hello.desktop (v=1.2).  $ cat debhello-1.2/data/hello.desktop [Desktop Entry] Name=Hello Name[fr]=Bonjour     Comment=Greetings Comment[fr]=Salutations Type=Application Keywords=hello Exec=hello Terminal=false Icon=hello.png Categories=Utility;     All other files are the same as in «Раздел 13.3, «Makefile (командная оболочка, интерфейс командной оболочки)»». Let’s package this with the debmake command. Here, the «-b':sh'»     option is used to specify that the generated binary package is a shell script. $ cd /path/to/debhello-1.2 $ debmake -b':sh' -x1 I: set parameters ... I: sanity check of parameters I: pkg="debhello", ver="1.2", rev="1" I: *** start packaging in "debhello-1.2". *** I: provide debhello_1.2.orig.tar.gz for non-native Debian package     I: pwd = "/path/to" I: $ ln -sf debhello-1.2.tar.gz debhello_1.2.orig.tar.gz I: pwd = "/path/to/debhello-1.2" I: parse binary package settings: :sh I: binary package=debhello Type=script / Arch=all M-A=foreign I: analyze the source tree I: build_type = make I: scan source for copyright+license text and file extensions I: 25 %, ext = md ...     Let’s inspect the notable template files generated. debian/control (шаблонный файл, v=1.2):  $ cat debian/control Source: debhello Section: unknown Priority: optional Maintainer: "Osamu Aoki" Build-Depends: debhelper-compat (= 13) Standards-Version: 4.6.2 Homepage:     Rules-Requires-Root: no #Vcs-Git: https://salsa.debian.org/debian/debhello.git #Vcs-Browser: https://salsa.debian.org/debian/debhello Package: debhello Architecture: all Multi-Arch: foreign Depends: ${misc:Depends} Description: auto-generated package by debmake This Debian binary package was auto-generated by the debmake(1) command provided by the debmake package.     Сделаем этот пакет Debian лучше. debian/control (версия сопровождающего, v=1.2):  $ vim debian/control ... hack, hack, hack, ... $ cat debian/control Source: debhello Section: devel Priority: optional Maintainer: Osamu Aoki Build-Depends: debhelper-compat (= 13)     Standards-Version: 4.6.2 Homepage: https://salsa.debian.org/debian/debmake-doc Rules-Requires-Root: no Package: debhello Architecture: all Multi-Arch: foreign Depends: zenity, ${misc:Depends} Description: Simple packaging example for debmake This Debian binary package is an example package. (This is an example only)     Please note the manually added zenity dependency. Файл debian/rules полностью совпадает с тем же файлом из «     Раздел 13.3, «Makefile (командная оболочка, интерфейс командной оболочки)»».     В каталоге debian/ имеются и другие шаблонные файлы. Их также следует обновить. Шаблонные файлы в каталоге debian/. (v=1.2):  $ rm -f debian/clean debian/dirs debian/install debian/links $ rm -f debian/README.source debian/source/*.ex $ rm -rf debian/patches $ tree -F debian debian/ ├── README.Debian ├── changelog ├── control ├── copyright     ├── gbp.conf ├── rules* ├── salsa-ci.yml ├── source/ │   └── format ├── tests/ │   └── control ├── upstream/ │   └── metadata └── watch 4 directories, 11 files The rest of the packaging activities are practically the same as     in «Раздел 13.3, «Makefile (командная оболочка, интерфейс командной оболочки)»».     Here is the generated dependency list of debhello_1.2-1_all.deb. The generated dependency list of debhello_1.2-1_all.deb:      $ dpkg -f debhello_1.2-1_all.deb pre-depends \ depends recommends conflicts breaks Depends: zenity 13.6. pyproject.toml (Python3, GUI)     Here is an example of creating a simple Debian package from a Python3 GUI program using pyproject.toml.     Допустим tar-архив основной ветки имеет имя debhello-1.3.tar.gz.     Получитм исходный код и создадим пакет Debian. Загрузим debhello-1.3.tar.gz.  $ wget http://www.example.org/download/debhello-1.3.tar.gz ... $ tar -xzmf debhello-1.3.tar.gz $ tree . ├── debhello-1.3 │   ├── LICENSE │   ├── MANIFEST.in │   ├── README.md     │   ├── data │   │   ├── hello.desktop │   │   └── hello.png │   ├── manpages │   │   └── hello.1 │   ├── pyproject.toml │   └── src │   └── debhello │   ├── __init__.py │   └── main.py └── debhello-1.3.tar.gz 6 directories, 10 files     Here, the content of this debhello source tree as follows. pyproject.toml (v=1.3) — PEP 517 configuration.  $ cat debhello-1.3/pyproject.toml [build-system] requires = ["setuptools >= 61.0"] # REQUIRED if [build-system] table is used... build-backend = "setuptools.build_meta" # If not defined, then legacy behavi... [project] name = "debhello" version = "1.3.0" description = "Hello Python (GUI)" readme = {file = "README.md", content-type = "text/markdown"} requires-python = ">=3.12" license = {file = "LICENSE.txt"} keywords = ["debhello"] authors = [ {name = "Osamu Aoki", email = "osamu@debian.org" }, ] maintainers = [ {name = "Osamu Aoki", email = "osamu@debian.org" }, ]     classifiers = [ "Development Status :: 5 - Production/Stable", "Intended Audience :: Developers", "Topic :: System :: Archiving :: Packaging", "License :: OSI Approved :: MIT License", "Programming Language :: Python :: 3", "Programming Language :: Python :: 3.12", "Programming Language :: Python :: 3 :: Only", # Others "Operating System :: POSIX :: Linux", "Natural Language :: English", ] [project.urls] "Homepage" = "https://salsa.debian.org/debian/debmake" "Bug Reports" = "https://salsa.debian.org/debian/debmake/issues" "Source" = "https://salsa.debian.org/debian/debmake" [project.scripts] hello = "debhello.main:main" [tool.setuptools] package-dir = {"" = "src"} packages = ["debhello"] include-package-data = true MANIFEST.in (v=1.3) — for tar-ball.      $ cat debhello-1.3/MANIFEST.in include data/* include manpages/* src/debhello/__init__.py (v=1.3).      $ cat debhello-1.3/src/debhello/__init__.py """ debhello program (GUI) """ src/debhello/main.py (v=1.3) — command entry point.  $ cat debhello-1.3/src/debhello/main.py #!/usr/bin/python3 from gi.repository import Gtk __version__ = '1.3.0' class TopWindow(Gtk.Window): def __init__(self): Gtk.Window.__init__(self) self.title = "Hello World!" self.counter = 0 self.border_width = 10 self.set_default_size(400, 100) self.set_position(Gtk.WindowPosition.CENTER)     self.button = Gtk.Button(label="Click me!") self.button.connect("clicked", self.on_button_clicked) self.add(self.button) self.connect("delete-event", self.on_window_destroy) def on_window_destroy(self, *args): Gtk.main_quit(*args) def on_button_clicked(self, widget): self.counter += 1 widget.set_label("Hello, World!\nClick count = %i" % self.counter) def main(): window = TopWindow() window.show_all() Gtk.main() if __name__ == '__main__': main() Let’s package this with the debmake command. Here, the -b':py3'     option is used to specify that the generated binary package contains Python3 script and module files. $ cd /path/to/debhello-1.3 $ debmake -b':py3' -x1 I: set parameters ... I: sanity check of parameters I: pkg="debhello", ver="1.3", rev="1" I: *** start packaging in "debhello-1.3". *** I: provide debhello_1.3.orig.tar.gz for non-native Debian package     I: pwd = "/path/to" I: $ ln -sf debhello-1.3.tar.gz debhello_1.3.orig.tar.gz I: pwd = "/path/to/debhello-1.3" I: parse binary package settings: :py3 I: binary package=debhello Type=python3 / Arch=all M-A=foreign I: analyze the source tree W: setuptools build system. I: build_type = Python (pyproject.toml: PEP-518, PEP-621, PEP-660) I: scan source for copyright+license text and file extensions ...     The result is practically the same as in «Раздел 13.4, «pyproject.toml (Python3, CLI)»».     Сделаем этот пакет Debian лучше. debian/rules (версия сопровождающего, v=1.3):  $ cd /path/to/debhello-1.3 $ vim debian/rules ... hack, hack, hack, ... $ cat debian/rules     #!/usr/bin/make -f export PYBUILD_NAME=debhello export PYBUILD_VERBOSE=1 export DH_VERBOSE=1 %: dh $@ --with python3 --buildsystem=pybuild debian/control (версия сопровождающего, v=1.3):  $ vim debian/control ... hack, hack, hack, ... $ cat debian/control Source: debhello Section: devel Priority: optional Maintainer: Osamu Aoki Build-Depends: debhelper-compat (= 13), pybuild-plugin-pyproject,     python3-all Standards-Version: 4.6.2 Homepage: https://salsa.debian.org/debian/debmake-doc Rules-Requires-Root: no Package: debhello Architecture: all Multi-Arch: foreign Depends: gir1.2-gtk-3.0, python3-gi, ${misc:Depends}, ${python3:Depends} Description: Simple packaging example for debmake This Debian binary package is an example package. (This is an example only)     Please note the manually added python3-gi and gir1.2-gtk-3.0 dependencies.     The rest of the packaging activities are practically the same as in >.     Here is the generated dependency list of debhello_1.3-1_all.deb. The generated dependency list of debhello_1.3-1_all.deb:      $ dpkg -f debhello_1.3-1_all.deb pre-depends \ depends recommends conflicts breaks Depends: gir1.2-gtk-3.0, python3-gi, python3:any 13.7. Makefile (single-binary package)     Here is an example of creating a simple Debian package from a simple C source program using the Makefile as its build system. Это — пример улучшенного исходного кода основной ветки из « Глава 5, Simple packaging». Он содержит страницу руководства,     файл desktop, а также иконку рабочего стола. Кроме того, чтобы этот пример имел большую практическую ценность, исходный кодкомпануется с внешней библиотекой libm.     Допустим tar-архив основной ветки имеет имя debhello-1.4.tar.gz.     Предполагается, что этот тип исходного кода будет установлен как несистемный файл: $ tar -xzmf debhello-1.4.tar.gz     $ cd debhello-1.4 $ make $ make install Debian packaging requires changing this «make install» process to     install files into the target system image location instead of the normal location under /usr/local.     Получитм исходный код и создадим пакет Debian. Загрузим debhello-1.4.tar.gz.  $ wget http://www.example.org/download/debhello-1.4.tar.gz ... $ tar -xzmf debhello-1.4.tar.gz $ tree . ├── debhello-1.4 │   ├── LICENSE │   ├── Makefile     │   ├── README.md │   ├── data │   │   ├── hello.desktop │   │   └── hello.png │   ├── man │   │   └── hello.1 │   └── src │   ├── config.h │   └── hello.c └── debhello-1.4.tar.gz 5 directories, 9 files     Ниже приводится содержимое этого архива с исходным кодом. src/hello.c (v=1.4):  $ cat debhello-1.4/src/hello.c #include "config.h" #include #include     int main() { printf("Hello, I am " PACKAGE_AUTHOR "!\n"); printf("4.0 * atan(1.0) = %10f8\n", 4.0*atan(1.0)); return 0; } src/config.h (v=1.4):  $ cat debhello-1.4/Makefile prefix = /usr/local all: src/hello src/hello: src/hello.c $(CC) $(CPPFLAGS) $(CFLAGS) $(LDFLAGS) -o $@ $^ -lm install: src/hello install -D src/hello \ $(DESTDIR)$(prefix)/bin/hello install -m 644 -D data/hello.desktop \ $(DESTDIR)$(prefix)/share/applications/hello.desktop     install -m 644 -D data/hello.png \ $(DESTDIR)$(prefix)/share/pixmaps/hello.png install -m 644 -D man/hello.1 \ $(DESTDIR)$(prefix)/share/man/man1/hello.1 clean: -rm -f src/hello distclean: clean uninstall: -rm -f $(DESTDIR)$(prefix)/bin/hello -rm -f $(DESTDIR)$(prefix)/share/applications/hello.desktop -rm -f $(DESTDIR)$(prefix)/share/pixmaps/hello.png -rm -f $(DESTDIR)$(prefix)/share/man/man1/hello.1 .PHONY: all install clean distclean uninstall Makefile (v=1.4):      $ cat debhello-1.4/src/config.h #define PACKAGE_AUTHOR "Osamu Aoki" Заметьте, что этот файл Makefile имеет соответствующую цель     install для страницы руководства, файла desktop и иконки рабочего стола.     Создадим пакет из этого исходного кода с помощью команды debmake. $ cd /path/to/debhello-1.4 $ debmake -x1 I: set parameters ... I: sanity check of parameters I: pkg="debhello", ver="1.4", rev="1" I: *** start packaging in "debhello-1.4". *** I: provide debhello_1.4.orig.tar.gz for non-native Debian package     I: pwd = "/path/to" I: $ ln -sf debhello-1.4.tar.gz debhello_1.4.orig.tar.gz I: pwd = "/path/to/debhello-1.4" I: parse binary package settings: I: binary package=debhello Type=bin / Arch=any M-A=foreign I: analyze the source tree I: build_type = make I: scan source for copyright+license text and file extensions I: 33 %, ext = c ...     The result is practically the same as in «Раздел 5.6, «Step 2: Generate template files with debmake»». Let’s make this Debian package, which is practically the same as     in «Раздел 5.7, «Шаг 3: изменение шаблонных файлов»», better as the maintainer. If the DEB_BUILD_MAINT_OPTIONS environment variable is not     exported in debian/rules, lintian warns «W: debhello: hardening-no-relro usr/bin/hello» for the linking of libm. The debian/control file makes it exactly the same as the one in «     Раздел 5.7, «Шаг 3: изменение шаблонных файлов»», since the libm library is always available as a part of libc6 (Priority: required).     В каталоге debian/ имеются и другие шаблонные файлы. Их также следует обновить. Шаблонные файлы в каталоге debian/. (v=1.4):  $ rm -f debian/clean debian/dirs debian/links $ rm -f debian/README.source debian/source/*.ex $ rm -rf debian/patches $ tree -F debian debian/ ├── README.Debian ├── changelog ├── control ├── copyright     ├── gbp.conf ├── install ├── rules* ├── salsa-ci.yml ├── source/ │   └── format ├── tests/ │   └── control ├── upstream/ │   └── metadata └── watch 4 directories, 12 files Остальные работы по подготовке пакета практически полностью     совпадают с описанными в «Раздел 5.8, «Step 4: Building package with debuild»».     Here is the generated dependency list of all binary packages. The generated dependency list of all binary packages (v=1.4):  $ dpkg -f debhello-dbgsym_1.4-1_amd64.deb pre-depends \     depends recommends conflicts breaks Depends: debhello (= 1.4-1) $ dpkg -f debhello_1.4-1_amd64.deb pre-depends \ depends recommends conflicts breaks Depends: libc6 (>= 2.34) 13.8. Makefile.in + configure (single-binary package) Here is an example of creating a simple Debian package from a     simple C source program using Makefile.in and configure as its build system. This is an enhanced upstream source example for «Раздел 13.7, «Makefile (single-binary package)»». This also links to an     external library, libm, and this source is configurable using arguments to the configure script, which generates the Makefile and src/config.h files.     Допустим tar-архив основной ветки имеет имя debhello-1.5.tar.gz.     Этот тип исходного кода предполагает установку в виде несистемного файла, например, как $ tar -xzmf debhello-1.5.tar.gz $ cd debhello-1.5     $ ./configure --with-math $ make $ make install     Получитм исходный код и создадим пакет Debian. Загрузим debhello-1.5.tar.gz.  $ wget http://www.example.org/download/debhello-1.5.tar.gz ... $ tar -xzmf debhello-1.5.tar.gz $ tree . ├── debhello-1.5 │   ├── LICENSE │   ├── Makefile.in     │   ├── README.md │   ├── configure │   ├── data │   │   ├── hello.desktop │   │   └── hello.png │   ├── man │   │   └── hello.1 │   └── src │   └── hello.c └── debhello-1.5.tar.gz 5 directories, 9 files     Ниже приводится содержимое этого архива с исходным кодом. src/hello.c (v=1.5):  $ cat debhello-1.5/src/hello.c #include "config.h" #ifdef WITH_MATH # include #endif #include int     main() { printf("Hello, I am " PACKAGE_AUTHOR "!\n"); #ifdef WITH_MATH printf("4.0 * atan(1.0) = %10f8\n", 4.0*atan(1.0)); #else printf("I can't do MATH!\n"); #endif return 0; } Makefile.in (v=1.5):  $ cat debhello-1.5/Makefile.in prefix = @prefix@ all: src/hello src/hello: src/hello.c $(CC) @VERBOSE@ \ $(CPPFLAGS) \ $(CFLAGS) \ $(LDFLAGS) \ -o $@ $^ \ @LINKLIB@ install: src/hello install -D src/hello \ $(DESTDIR)$(prefix)/bin/hello     install -m 644 -D data/hello.desktop \ $(DESTDIR)$(prefix)/share/applications/hello.desktop install -m 644 -D data/hello.png \ $(DESTDIR)$(prefix)/share/pixmaps/hello.png install -m 644 -D man/hello.1 \ $(DESTDIR)$(prefix)/share/man/man1/hello.1 clean: -rm -f src/hello distclean: clean uninstall: -rm -f $(DESTDIR)$(prefix)/bin/hello -rm -f $(DESTDIR)$(prefix)/share/applications/hello.desktop -rm -f $(DESTDIR)$(prefix)/share/pixmaps/hello.png -rm -f $(DESTDIR)$(prefix)/share/man/man1/hello.1 .PHONY: all install clean distclean uninstall configure (v=1.5):  $ cat debhello-1.5/configure #!/bin/sh -e # default values PREFIX="/usr/local" VERBOSE="" WITH_MATH="0" LINKLIB="" PACKAGE_AUTHOR="John Doe" # parse arguments while [ "${1}" != "" ]; do VAR="${1%=*}" # Drop suffix =* VAL="${1#*=}" # Drop prefix *= case "${VAR}" in --prefix) PREFIX="${VAL}" ;; --verbose|-v) VERBOSE="-v" ;;     --with-math) WITH_MATH="1" LINKLIB="-lm" ;; --author) PACKAGE_AUTHOR="${VAL}" ;; *) echo "W: Unknown argument: ${1}" esac shift done # setup configured Makefile and src/config.h sed -e "s,@prefix@,${PREFIX}," \ -e "s,@VERBOSE@,${VERBOSE}," \ -e "s,@LINKLIB@,${LINKLIB}," \ Makefile if [ "${WITH_MATH}" = 1 ]; then echo "#define WITH_MATH" >src/config.h else echo "/* not defined: WITH_MATH */" >src/config.h fi echo "#define PACKAGE_AUTHOR \"${PACKAGE_AUTHOR}\"" >>src/config.h     Please note that the configure command replaces strings with @…​@ in Makefile.in to produce Makefile and creates src/config.h.     Создадим пакет из этого исходного кода с помощью команды debmake. $ cd /path/to/debhello-1.5 $ debmake -x1 I: set parameters ... I: sanity check of parameters I: pkg="debhello", ver="1.5", rev="1" I: *** start packaging in "debhello-1.5". *** I: provide debhello_1.5.orig.tar.gz for non-native Debian package     I: pwd = "/path/to" I: $ ln -sf debhello-1.5.tar.gz debhello_1.5.orig.tar.gz I: pwd = "/path/to/debhello-1.5" I: parse binary package settings: I: binary package=debhello Type=bin / Arch=any M-A=foreign I: analyze the source tree I: build_type = configure I: scan source for copyright+license text and file extensions I: 17 %, ext = in ... Полученный результат похож на то, что описано в «Раздел 5.6,     «Step 2: Generate template files with debmake»», но полностью они не совпадают.     Let’s inspect the notable template files generated. debian/rules (шаблонный файл, v=1.5):  $ cd /path/to/debhello-1.5 $ cat debian/rules #!/usr/bin/make -f # You must remove unused comment lines for the released package.     #export DH_VERBOSE = 1 #export DEB_BUILD_MAINT_OPTIONS = hardening=+all #export DEB_CFLAGS_MAINT_APPEND = -Wall -pedantic #export DEB_LDFLAGS_MAINT_APPEND = -Wl,-O1 %: dh $@     Сделаем этот пакет Debian лучше. debian/rules (версия сопровождающего, v=1.5):  $ cd /path/to/debhello-1.5 $ vim debian/rules ... hack, hack, hack, ... $ cat debian/rules #!/usr/bin/make -f export DH_VERBOSE = 1 export DEB_BUILD_MAINT_OPTIONS = hardening=+all     export DEB_CFLAGS_MAINT_APPEND = -Wall -pedantic export DEB_LDFLAGS_MAINT_APPEND = -Wl,--as-needed %: dh $@ override_dh_auto_configure: dh_auto_configure -- \ --with-math \ --author="Osamu Aoki"     В каталоге debian/ имеются и другие шаблонные файлы. Их также следует обновить. Остальные работы по подготовке пакета практически полностью     совпадают с описанными в «Раздел 5.8, «Step 4: Building package with debuild»». 13.9. Autotools (single-binary package) Here is an example of creating a simple Debian package from a     simple C source program using Autotools = Autoconf and Automake ( Makefile.am and configure.ac) as its build system. This source usually comes with the upstream auto-generated Makefile.in and configure files, too. This source can be packaged     using these files as in «Раздел 13.8, «Makefile.in + configure (single-binary package)»» with the help of the autotools-dev package. The better alternative is to regenerate these files using the latest Autoconf and Automake packages if the upstream provided     Makefile.am and configure.ac are compatible with the latest version. This is advantageous for porting to new CPU architectures, etc. This can be automated by using the «--with autoreconf» option for the dh command.     Допустим tar-архив основной ветки имеет имя debhello-1.6.tar.gz.     Этот тип исходного кода предполагает установку в виде несистемного файла, например, как $ tar -xzmf debhello-1.6.tar.gz $ cd debhello-1.6     $ autoreconf -ivf # optional $ ./configure --with-math $ make $ make install     Получитм исходный код и создадим пакет Debian. Загрузим debhello-1.6.tar.gz.  $ wget http://www.example.org/download/debhello-1.6.tar.gz ... $ tar -xzmf debhello-1.6.tar.gz $ tree . ├── debhello-1.6 │   ├── LICENSE │   ├── Makefile.am │   ├── README.md     │   ├── configure.ac │   ├── data │   │   ├── hello.desktop │   │   └── hello.png │   ├── man │   │   ├── Makefile.am │   │   └── hello.1 │   └── src │   ├── Makefile.am │   └── hello.c └── debhello-1.6.tar.gz 5 directories, 11 files     Ниже приводится содержимое этого архива с исходным кодом. src/hello.c (v=1.6):  $ cat debhello-1.6/src/hello.c #include "config.h" #ifdef WITH_MATH # include #endif #include int     main() { printf("Hello, I am " PACKAGE_AUTHOR "!\n"); #ifdef WITH_MATH printf("4.0 * atan(1.0) = %10f8\n", 4.0*atan(1.0)); #else printf("I can't do MATH!\n"); #endif return 0; } Makefile.am (v=1.6):  $ cat debhello-1.6/Makefile.am SUBDIRS = src man     $ cat debhello-1.6/man/Makefile.am dist_man_MANS = hello.1 $ cat debhello-1.6/src/Makefile.am bin_PROGRAMS = hello hello_SOURCES = hello.c configure.ac (v=1.6):  $ cat debhello-1.6/configure.ac # -*- Autoconf -*- # Process this file with autoconf to produce a configure script. AC_PREREQ([2.69]) AC_INIT([debhello],[2.1],[foo@example.org]) AC_CONFIG_SRCDIR([src/hello.c]) AC_CONFIG_HEADERS([config.h]) echo "Standard customization chores" AC_CONFIG_AUX_DIR([build-aux]) AM_INIT_AUTOMAKE([foreign]) # Add #define PACKAGE_AUTHOR ... in config.h with a comment AC_DEFINE(PACKAGE_AUTHOR, ["Osamu Aoki"], [Define PACKAGE_AUTHOR]) echo "Add --with-math option functionality to ./configure" AC_ARG_WITH([math], [AS_HELP_STRING([--with-math], [compile with math library @<:@default=yes@:>@])], [], [with_math="yes"] )     echo "==== withval := \"$withval\"" echo "==== with_math := \"$with_math\"" # m4sh if-else construct AS_IF([test "x$with_math" != "xno"],[ echo "==== Check include: math.h" AC_CHECK_HEADER(math.h,[],[ AC_MSG_ERROR([Couldn't find math.h.] ) ]) echo "==== Check library: libm" AC_SEARCH_LIBS(atan, [m]) #AC_CHECK_LIB(m, atan) echo "==== Build with LIBS := \"$LIBS\"" AC_DEFINE(WITH_MATH, [1], [Build with the math library]) ],[ echo "==== Skip building with math.h." AH_TEMPLATE(WITH_MATH, [Build without the math library]) ]) # Checks for programs. AC_PROG_CC AC_CONFIG_FILES([Makefile man/Makefile src/Makefile]) AC_OUTPUT Подсказка     Without «foreign» strictness level specified in AM_INIT_AUTOMAKE () as above, automake defaults to «gnu» strictness level requiring several files in the top-level directory. See «3.2 Strictness» in the automake document.     Создадим пакет из этого исходного кода с помощью команды debmake. $ cd /path/to/debhello-1.6 $ debmake -x1 I: set parameters ... I: sanity check of parameters I: pkg="debhello", ver="1.6", rev="1" I: *** start packaging in "debhello-1.6". *** I: provide debhello_1.6.orig.tar.gz for non-native Debian package     I: pwd = "/path/to" I: $ ln -sf debhello-1.6.tar.gz debhello_1.6.orig.tar.gz I: pwd = "/path/to/debhello-1.6" I: parse binary package settings: I: binary package=debhello Type=bin / Arch=any M-A=foreign I: analyze the source tree I: build_type = Autotools with autoreconf I: scan source for copyright+license text and file extensions I: 33 %, ext = am ... Получившийся результат похож на то, что было описано в «     Раздел 13.8, «Makefile.in + configure (single-binary package)»», но не совпадает с ним в точности.     Let’s inspect the notable template files generated. debian/rules (шаблонный файл, v=1.6):  $ cd /path/to/debhello-1.6 $ cat debian/rules #!/usr/bin/make -f # You must remove unused comment lines for the released package. #export DH_VERBOSE = 1     #export DEB_BUILD_MAINT_OPTIONS = hardening=+all #export DEB_CFLAGS_MAINT_APPEND = -Wall -pedantic #export DEB_LDFLAGS_MAINT_APPEND = -Wl,-O1 %: dh $@ --with autoreconf #override_dh_install: # dh_install --list-missing -X.la -X.pyc -X.pyo     Сделаем этот пакет Debian лучше. debian/rules (версия сопровождающего, v=1.6):  $ cd /path/to/debhello-1.6 $ vim debian/rules ... hack, hack, hack, ... $ cat debian/rules #!/usr/bin/make -f export DH_VERBOSE = 1     export DEB_BUILD_MAINT_OPTIONS = hardening=+all export DEB_CFLAGS_MAINT_APPEND = -Wall -pedantic export DEB_LDFLAGS_MAINT_APPEND = -Wl,--as-needed %: dh $@ --with autoreconf override_dh_auto_configure: dh_auto_configure -- \ --with-math     В каталоге debian/ имеются и другие шаблонные файлы. Их также следует обновить. Остальные работы по подготовке пакета практически полностью     совпадают с описанными в «Раздел 5.8, «Step 4: Building package with debuild»». 13.10. CMake (single-binary package) Here is an example of creating a simple Debian package from a     simple C source program using CMake (CMakeLists.txt and some files such as config.h.in) as its build system. The cmake command generates the Makefile file based on the     CMakeLists.txt file and its -D option. It also configures the file as specified in its configure_file(…​) by replacing strings with @…​@ and changing the #cmakedefine …​ line.     Допустим tar-архив основной ветки имеет имя debhello-1.7.tar.gz.     Этот тип исходного кода предполагает установку в виде несистемного файла, например, как $ tar -xzmf debhello-1.7.tar.gz $ cd debhello-1.7 $ mkdir obj-x86_64-linux-gnu # for out-of-tree build     $ cd obj-x86_64-linux-gnu $ cmake .. $ make $ make install     Получитм исходный код и создадим пакет Debian. Загрузим debhello-1.7.tar.gz.  $ wget http://www.example.org/download/debhello-1.7.tar.gz ... $ tar -xzmf debhello-1.7.tar.gz $ tree . ├── debhello-1.7 │   ├── CMakeLists.txt │   ├── LICENSE │   ├── README.md     │   ├── data │   │   ├── hello.desktop │   │   └── hello.png │   ├── man │   │   ├── CMakeLists.txt │   │   └── hello.1 │   └── src │   ├── CMakeLists.txt │   ├── config.h.in │   └── hello.c └── debhello-1.7.tar.gz 5 directories, 11 files     Ниже приводится содержимое этого архива с исходным кодом. src/hello.c (v=1.7):  $ cat debhello-1.7/src/hello.c #include "config.h" #ifdef WITH_MATH # include #endif #include int     main() { printf("Hello, I am " PACKAGE_AUTHOR "!\n"); #ifdef WITH_MATH printf("4.0 * atan(1.0) = %10f8\n", 4.0*atan(1.0)); #else printf("I can't do MATH!\n"); #endif return 0; } src/config.h.in (v=1.7):  $ cat debhello-1.7/src/config.h.in     /* name of the package author */ #define PACKAGE_AUTHOR "@PACKAGE_AUTHOR@" /* math library support */ #cmakedefine WITH_MATH CMakeLists.txt (v=1.7):  $ cat debhello-1.7/CMakeLists.txt cmake_minimum_required(VERSION 2.8) project(debhello) set(PACKAGE_AUTHOR "Osamu Aoki") add_subdirectory(src) add_subdirectory(man) $ cat debhello-1.7/man/CMakeLists.txt install( FILES ${CMAKE_CURRENT_SOURCE_DIR}/hello.1 DESTINATION share/man/man1 ) $ cat debhello-1.7/src/CMakeLists.txt     # Always define HAVE_CONFIG_H add_definitions(-DHAVE_CONFIG_H) # Interactively define WITH_MATH option(WITH_MATH "Build with math support" OFF) #variable_watch(WITH_MATH) # Generate config.h from config.h.in configure_file( "${CMAKE_CURRENT_SOURCE_DIR}/config.h.in" "${CMAKE_CURRENT_BINARY_DIR}/config.h" ) include_directories("${CMAKE_CURRENT_BINARY_DIR}") add_executable(hello hello.c) install(TARGETS hello RUNTIME DESTINATION bin )     Создадим пакет из этого исходного кода с помощью команды debmake. $ cd /path/to/debhello-1.7 $ debmake -x1 I: set parameters ... I: sanity check of parameters I: pkg="debhello", ver="1.7", rev="1" I: *** start packaging in "debhello-1.7". *** I: provide debhello_1.7.orig.tar.gz for non-native Debian package     I: pwd = "/path/to" I: $ ln -sf debhello-1.7.tar.gz debhello_1.7.orig.tar.gz I: pwd = "/path/to/debhello-1.7" I: parse binary package settings: I: binary package=debhello Type=bin / Arch=any M-A=foreign I: analyze the source tree I: build_type = Cmake I: scan source for copyright+license text and file extensions I: 33 %, ext = text ... Получившийся результат похож на то, что было описано в «     Раздел 13.8, «Makefile.in + configure (single-binary package)»», но не совпадает с ним в точности.     Let’s inspect the notable template files generated. debian/rules (шаблонный файл, v=1.7):  $ cd /path/to/debhello-1.7 $ cat debian/rules #!/usr/bin/make -f # You must remove unused comment lines for the released package. #export DH_VERBOSE = 1 #export DEB_BUILD_MAINT_OPTIONS = hardening=+all     #export DEB_CFLAGS_MAINT_APPEND = -Wall -pedantic #export DEB_LDFLAGS_MAINT_APPEND = -Wl,-O1 %: dh $@ #override_dh_auto_configure: # dh_auto_configure -- \ # -DCMAKE_LIBRARY_ARCHITECTURE="$(DEB_TARGET_MULTIARCH)" debian/control (шаблонный файл, v=1.7):  $ cat debian/control Source: debhello Section: unknown Priority: optional Maintainer: "Osamu Aoki" Build-Depends: cmake, debhelper-compat (= 13) Standards-Version: 4.6.2 Homepage:     Rules-Requires-Root: no #Vcs-Git: https://salsa.debian.org/debian/debhello.git #Vcs-Browser: https://salsa.debian.org/debian/debhello Package: debhello Architecture: any Multi-Arch: foreign Depends: ${misc:Depends}, ${shlibs:Depends} Description: auto-generated package by debmake This Debian binary package was auto-generated by the debmake(1) command provided by the debmake package.     Сделаем этот пакет Debian лучше. debian/rules (версия сопровождающего, v=1.7):  $ cd /path/to/debhello-1.7 $ vim debian/rules ... hack, hack, hack, ... $ cat debian/rules #!/usr/bin/make -f export DH_VERBOSE = 1     export DEB_BUILD_MAINT_OPTIONS = hardening=+all export DEB_CFLAGS_MAINT_APPEND = -Wall -pedantic export DEB_LDFLAGS_MAINT_APPEND = -Wl,--as-needed %: dh $@ override_dh_auto_configure: dh_auto_configure -- -DWITH-MATH=1 debian/control (версия сопровждающего, v=1.7):  $ vim debian/control ... hack, hack, hack, ... $ cat debian/control Source: debhello Section: devel Priority: optional Maintainer: Osamu Aoki Build-Depends: cmake, debhelper-compat (= 13)     Standards-Version: 4.6.2 Homepage: https://salsa.debian.org/debian/debmake-doc Rules-Requires-Root: no Package: debhello Architecture: any Multi-Arch: foreign Depends: ${misc:Depends}, ${shlibs:Depends} Description: Simple packaging example for debmake This Debian binary package is an example package. (This is an example only)     В каталоге debian/ имеются и другие шаблонные файлы. Их также следует обновить. Остальные работы по подготовке пакета практически полностью     совпадают с описанными в «Раздел 13.8, «Makefile.in + configure (single-binary package)»». 13.11. Autotools (multi-binary package) Here is an example of creating a set of Debian binary packages including the executable package, the shared library package, the     development file package, and the debug symbol package from a simple C source program using Autotools = Autoconf and Automake (which use Makefile.am and configure.ac as their input files) as its build system.     Let’s package this in the same way as in «Раздел 13.9, «Autotools (single-binary package)»».     Допустим tar-архив основной ветки имеет имя debhello-2.0.tar.gz.     Этот тип исходного кода предполагает установку в виде несистемного файла, например, как $ tar -xzmf debhello-2.0.tar.gz $ cd debhello-2.0     $ autoreconf -ivf # optional $ ./configure --with-math $ make $ make install     Получитм исходный код и создадим пакет Debian. Загрузим debhello-2.0.tar.gz.  $ wget http://www.example.org/download/debhello-2.0.tar.gz ... $ tar -xzmf debhello-2.0.tar.gz $ tree . ├── debhello-2.0 │   ├── LICENSE │   ├── Makefile.am │   ├── README.md │   ├── configure.ac │   ├── data     │   │   ├── hello.desktop │   │   └── hello.png │   ├── lib │   │   ├── Makefile.am │   │   ├── sharedlib.c │   │   └── sharedlib.h │   ├── man │   │   ├── Makefile.am │   │   └── hello.1 │   └── src │   ├── Makefile.am │   └── hello.c └── debhello-2.0.tar.gz 6 directories, 14 files     Ниже приводится содержимое этого архива с исходным кодом. src/hello.c (v=2.0):  $ cat debhello-2.0/src/hello.c #include "config.h" #include #include     int main() { printf("Hello, I am " PACKAGE_AUTHOR "!\n"); sharedlib(); return 0; } lib/sharedlib.h и lib/sharedlib.c (v=1.6):  $ cat debhello-2.0/lib/sharedlib.h int sharedlib(); $ cat debhello-2.0/lib/sharedlib.c     #include int sharedlib() { printf("This is a shared library!\n"); return 0; } Makefile.am (v=2.0):  $ cat debhello-2.0/Makefile.am # recursively process `Makefile.am` in SUBDIRS SUBDIRS = lib src man $ cat debhello-2.0/man/Makefile.am # manpages (distributed in the source package) dist_man_MANS = hello.1 $ cat debhello-2.0/lib/Makefile.am # libtool librares to be produced lib_LTLIBRARIES = libsharedlib.la # source files used for lib_LTLIBRARIES libsharedlib_la_SOURCES = sharedlib.c # C pre-processor flags used for lib_LTLIBRARIES #libsharedlib_la_CPPFLAGS =     # Headers files to be installed in /include include_HEADERS = sharedlib.h # Versioning Libtool Libraries with version triplets libsharedlib_la_LDFLAGS = -version-info 1:0:0 $ cat debhello-2.0/src/Makefile.am # program executables to be produced bin_PROGRAMS = hello # source files used for bin_PROGRAMS hello_SOURCES = hello.c # C pre-processor flags used for bin_PROGRAMS AM_CPPFLAGS = -I$(srcdir) -I$(top_srcdir)/lib # Extra options for the linker for hello # hello_LDFLAGS = # Libraries the `hello` binary to be linked hello_LDADD = $(top_srcdir)/lib/libsharedlib.la configure.ac (v=2.0):  $ cat debhello-2.0/configure.ac # -*- Autoconf -*- # Process this file with autoconf to produce a configure script. AC_PREREQ([2.69]) AC_INIT([debhello],[2.2],[foo@example.org]) AC_CONFIG_SRCDIR([src/hello.c]) AC_CONFIG_HEADERS([config.h]) echo "Standard customization chores" AC_CONFIG_AUX_DIR([build-aux]) AM_INIT_AUTOMAKE([foreign]) # Set default to --enable-shared --disable-static LT_INIT([shared disable-static])     # find the libltdl sources in the libltdl sub-directory LT_CONFIG_LTDL_DIR([libltdl]) # choose one LTDL_INIT([recursive]) #LTDL_INIT([subproject]) #LTDL_INIT([nonrecursive]) # Add #define PACKAGE_AUTHOR ... in config.h with a comment AC_DEFINE(PACKAGE_AUTHOR, ["Osamu Aoki"], [Define PACKAGE_AUTHOR]) # Checks for programs. AC_PROG_CC # only for the recursive case AC_CONFIG_FILES([Makefile lib/Makefile man/Makefile src/Makefile]) AC_OUTPUT     Создадим пакет с помощью команды debmake в виде нескольких пакетов: * debhello: type = bin     * libsharedlib1: type = lib * libsharedlib-dev: type = dev     Here, the -b\',libsharedlib1,libsharedlib-dev' option is used to specify the generated binary packages. $ cd /path/to/debhello-2.0 $ debmake -b',libsharedlib1,libsharedlib-dev' -x1 I: set parameters ... I: sanity check of parameters I: pkg="debhello", ver="2.0", rev="1" I: *** start packaging in "debhello-2.0". *** I: provide debhello_2.0.orig.tar.gz for non-native Debian package     I: pwd = "/path/to" I: $ ln -sf debhello-2.0.tar.gz debhello_2.0.orig.tar.gz I: pwd = "/path/to/debhello-2.0" I: parse binary package settings: ,libsharedlib1,libsharedlib-dev I: binary package=debhello Type=bin / Arch=any M-A=foreign I: binary package=libsharedlib1 Type=lib / Arch=any M-A=same I: binary package=libsharedlib-dev Type=dev / Arch=any M-A=same I: analyze the source tree I: build_type = Autotools with autoreconf ... Получившийся результат похож на то, что было описано в «     Раздел 13.8, «Makefile.in + configure (single-binary package)»», но имеет большее количество шаблонных файлов.     Let’s inspect the notable template files generated. debian/rules (шаблонный файл, v=2.0):  $ cd /path/to/debhello-2.0 $ cat debian/rules #!/usr/bin/make -f # You must remove unused comment lines for the released package. #export DH_VERBOSE = 1     #export DEB_BUILD_MAINT_OPTIONS = hardening=+all #export DEB_CFLAGS_MAINT_APPEND = -Wall -pedantic #export DEB_LDFLAGS_MAINT_APPEND = -Wl,-O1 %: dh $@ --with autoreconf #override_dh_install: # dh_install --list-missing -X.la -X.pyc -X.pyo     Сделаем этот пакет Debian лучше. debian/rules (версия сопровождающего, v=2.0):  $ cd /path/to/debhello-2.0 $ vim debian/rules ... hack, hack, hack, ... $ cat debian/rules #!/usr/bin/make -f export DH_VERBOSE = 1     export DEB_BUILD_MAINT_OPTIONS = hardening=+all export DEB_CFLAGS_MAINT_APPEND = -Wall -pedantic export DEB_LDFLAGS_MAINT_APPEND = -Wl,--as-needed %: dh $@ --with autoreconf override_dh_missing: dh_missing -X.la debian/control (версия сопровождающего, v=2.0):  $ vim debian/control ... hack, hack, hack, ... $ cat debian/control Source: debhello Section: devel Priority: optional Maintainer: Osamu Aoki Build-Depends: debhelper-compat (= 13), dh-autoreconf Standards-Version: 4.6.2 Homepage: https://salsa.debian.org/debian/debmake-doc Rules-Requires-Root: no Package: debhello Architecture: any Multi-Arch: foreign Depends: libsharedlib1 (= ${binary:Version}), ${misc:Depends}, ${shlibs:Depends}     Description: Simple packaging example for debmake This package contains the compiled binary executable. . This Debian binary package is an example package. (This is an example only) Package: libsharedlib1 Section: libs Architecture: any Multi-Arch: same Pre-Depends: ${misc:Pre-Depends} Depends: ${misc:Depends}, ${shlibs:Depends} Description: Simple packaging example for debmake This package contains the shared library. Package: libsharedlib-dev Section: libdevel Architecture: any Multi-Arch: same Depends: libsharedlib1 (= ${binary:Version}), ${misc:Depends} Description: Simple packaging example for debmake This package contains the development files. debian/*.install (версия сопровождающего, v=2.0):  $ vim debian/copyright ... hack, hack, hack, ... $ cat debian/copyright Format: https://www.debian.org/doc/packaging-manuals/copyright-format/1.0/ Upstream-Name: debhello Upstream-Contact: Osamu Aoki Source: https://salsa.debian.org/debian/debmake-doc Files: * Copyright: 2015-2021 Osamu Aoki License: Expat Permission is hereby granted, free of charge, to any person obtaining a     copy of this software and associated documentation files (the "Software"), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions: . The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software. . THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. Since this upstream source creates the proper auto-generated     Makefile, there is no need to create debian/install and debian/ manpages files.     В каталоге debian/ имеются и другие шаблонные файлы. Их также следует обновить. Шабонные файлы в каталоге debian/. (v=2.0):  $ rm -f debian/clean debian/dirs debian/install debian/links $ rm -f debian/README.source debian/source/*.ex $ rm -rf debian/patches $ tree -F debian debian/ ├── README.Debian ├── changelog ├── control ├── copyright ├── debhello.dirs ├── debhello.doc-base ├── debhello.docs ├── debhello.examples ├── debhello.info     ├── debhello.install ├── debhello.links ├── debhello.manpages ├── gbp.conf ├── libsharedlib-dev.install ├── libsharedlib1.install ├── libsharedlib1.symbols ├── rules* ├── salsa-ci.yml ├── source/ │   └── format ├── tests/ │   └── control ├── upstream/ │   └── metadata └── watch 4 directories, 22 files Остальные работы по подготовке пакета практически полностью     совпадают с описанными в «Раздел 13.8, «Makefile.in + configure (single-binary package)»».     Here are the generated dependency list of all binary packages. The generated dependency list of all binary packages (v=2.0):  $ dpkg -f debhello-dbgsym_2.0-1_amd64.deb pre-depends \ depends recommends conflicts breaks Depends: debhello (= 2.0-1) $ dpkg -f debhello_2.0-1_amd64.deb pre-depends \ depends recommends conflicts breaks Depends: libsharedlib1 (= 2.0-1), libc6 (>= 2.34)     $ dpkg -f libsharedlib-dev_2.0-1_amd64.deb pre-depends \ depends recommends conflicts breaks Depends: libsharedlib1 (= 2.0-1) $ dpkg -f libsharedlib1-dbgsym_2.0-1_amd64.deb pre-depends \ depends recommends conflicts breaks Depends: libsharedlib1 (= 2.0-1) $ dpkg -f libsharedlib1_2.0-1_amd64.deb pre-depends \ depends recommends conflicts breaks Depends: libc6 (>= 2.2.5) 13.12. CMake (multi-binary package) Here is an example of creating a set of Debian binary packages including the executable package, the shared library package, the     development file package, and the debug symbol package from a simple C source program using CMake (CMakeLists.txt and some files such as config.h.in) as its build system.     Допустим tar-архив основной ветки имеет имя debhello-2.1.tar.gz.     Этот тип исходного кода предполагает установку в виде несистемного файла, например, как $ tar -xzmf debhello-2.1.tar.gz $ cd debhello-2.1 $ mkdir obj-x86_64-linux-gnu     $ cd obj-x86_64-linux-gnu $ cmake .. $ make $ make install     Получитм исходный код и создадим пакет Debian. Загрузим debhello-2.1.tar.gz.  $ wget http://www.example.org/download/debhello-2.1.tar.gz ... $ tar -xzmf debhello-2.1.tar.gz $ tree . ├── debhello-2.1 │   ├── CMakeLists.txt │   ├── LICENSE │   ├── README.md │   ├── data │   │   ├── hello.desktop     │   │   └── hello.png │   ├── lib │   │   ├── CMakeLists.txt │   │   ├── sharedlib.c │   │   └── sharedlib.h │   ├── man │   │   ├── CMakeLists.txt │   │   └── hello.1 │   └── src │   ├── CMakeLists.txt │   ├── config.h.in │   └── hello.c └── debhello-2.1.tar.gz 6 directories, 14 files     Ниже приводится содержимое этого архива с исходным кодом. src/hello.c (v=2.1):  $ cat debhello-2.1/src/hello.c #include "config.h" #include #include     int main() { printf("Hello, I am " PACKAGE_AUTHOR "!\n"); sharedlib(); return 0; } src/config.h.in (v=2.1):      $ cat debhello-2.1/src/config.h.in /* name of the package author */ #define PACKAGE_AUTHOR "@PACKAGE_AUTHOR@" lib/sharedlib.c и lib/sharedlib.h (v=2.1):  $ cat debhello-2.1/lib/sharedlib.h int sharedlib(); $ cat debhello-2.1/lib/sharedlib.c     #include int sharedlib() { printf("This is a shared library!\n"); return 0; } CMakeLists.txt (v=2.1):  $ cat debhello-2.1/CMakeLists.txt cmake_minimum_required(VERSION 2.8) project(debhello) set(PACKAGE_AUTHOR "Osamu Aoki") add_subdirectory(lib) add_subdirectory(src) add_subdirectory(man) $ cat debhello-2.1/man/CMakeLists.txt install( FILES ${CMAKE_CURRENT_SOURCE_DIR}/hello.1 DESTINATION share/man/man1 )     $ cat debhello-2.1/src/CMakeLists.txt # Always define HAVE_CONFIG_H add_definitions(-DHAVE_CONFIG_H) # Generate config.h from config.h.in configure_file( "${CMAKE_CURRENT_SOURCE_DIR}/config.h.in" "${CMAKE_CURRENT_BINARY_DIR}/config.h" ) include_directories("${CMAKE_CURRENT_BINARY_DIR}") include_directories("${CMAKE_SOURCE_DIR}/lib") add_executable(hello hello.c) target_link_libraries(hello sharedlib) install(TARGETS hello RUNTIME DESTINATION bin )     Создадим пакет из этого исходного кода с помощью команды debmake. $ cd /path/to/debhello-2.1 $ debmake -b',libsharedlib1,libsharedlib-dev' -x1 I: set parameters ... I: sanity check of parameters I: pkg="debhello", ver="2.1", rev="1" I: *** start packaging in "debhello-2.1". *** I: provide debhello_2.1.orig.tar.gz for non-native Debian package     I: pwd = "/path/to" I: $ ln -sf debhello-2.1.tar.gz debhello_2.1.orig.tar.gz I: pwd = "/path/to/debhello-2.1" I: parse binary package settings: ,libsharedlib1,libsharedlib-dev I: binary package=debhello Type=bin / Arch=any M-A=foreign I: binary package=libsharedlib1 Type=lib / Arch=any M-A=same I: binary package=libsharedlib-dev Type=dev / Arch=any M-A=same I: analyze the source tree I: build_type = Cmake ... Получившийся результат похож на то, что было описано в «     Раздел 13.8, «Makefile.in + configure (single-binary package)»», но не совпадает с ним в точности.     Let’s inspect the notable template files generated. debian/rules (шаблонный файл, v=2.1):  $ cd /path/to/debhello-2.1 $ cat debian/rules #!/usr/bin/make -f # You must remove unused comment lines for the released package. #export DH_VERBOSE = 1 #export DEB_BUILD_MAINT_OPTIONS = hardening=+all     #export DEB_CFLAGS_MAINT_APPEND = -Wall -pedantic #export DEB_LDFLAGS_MAINT_APPEND = -Wl,-O1 %: dh $@ #override_dh_auto_configure: # dh_auto_configure -- \ # -DCMAKE_LIBRARY_ARCHITECTURE="$(DEB_TARGET_MULTIARCH)"     Сделаем этот пакет Debian лучше. debian/rules (версия сопровождающего, v=2.1):  $ cd /path/to/debhello-2.1 $ vim debian/rules ... hack, hack, hack, ... $ cat debian/rules #!/usr/bin/make -f export DH_VERBOSE = 1 export DEB_BUILD_MAINT_OPTIONS = hardening=+all     export DEB_CFLAGS_MAINT_APPEND = -Wall -pedantic export DEB_LDFLAGS_MAINT_APPEND = -Wl,--as-needed DEB_HOST_MULTIARCH ?= $(shell dpkg-architecture -qDEB_HOST_MULTIARCH) %: dh $@ override_dh_auto_configure: dh_auto_configure -- \ -DCMAKE_LIBRARY_ARCHITECTURE="$(DEB_HOST_MULTIARCH)" debian/control (версия сопровождающего, v=2.1):  $ vim debian/control ... hack, hack, hack, ... $ cat debian/control Source: debhello Section: devel Priority: optional Maintainer: Osamu Aoki Build-Depends: cmake, debhelper-compat (= 13) Standards-Version: 4.6.2 Homepage: https://salsa.debian.org/debian/debmake-doc Rules-Requires-Root: no Package: debhello Architecture: any Multi-Arch: foreign Depends: libsharedlib1 (= ${binary:Version}), ${misc:Depends}, ${shlibs:Depends}     Description: Simple packaging example for debmake This package contains the compiled binary executable. . This Debian binary package is an example package. (This is an example only) Package: libsharedlib1 Section: libs Architecture: any Multi-Arch: same Pre-Depends: ${misc:Pre-Depends} Depends: ${misc:Depends}, ${shlibs:Depends} Description: Simple packaging example for debmake This package contains the shared library. Package: libsharedlib-dev Section: libdevel Architecture: any Multi-Arch: same Depends: libsharedlib1 (= ${binary:Version}), ${misc:Depends} Description: Simple packaging example for debmake This package contains the development files. debian/*.install (версия сопровождающего, v=2.1):  $ vim debian/copyright ... hack, hack, hack, ... $ cat debian/copyright Format: https://www.debian.org/doc/packaging-manuals/copyright-format/1.0/ Upstream-Name: debhello Upstream-Contact: Osamu Aoki Source: https://salsa.debian.org/debian/debmake-doc Files: * Copyright: 2015-2021 Osamu Aoki License: Expat Permission is hereby granted, free of charge, to any person obtaining a     copy of this software and associated documentation files (the "Software"), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions: . The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software. . THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.     Файл CMakeList.txt из основной ветки необходимо изменить тк, чтобы в нём была обеспечена поддержка мультиархитектурных путей. debian/patches/* (версия сопровождающего, v=2.1):      ... hack, hack, hack, ... $ cat debian/libsharedlib1.symbols libsharedlib.so.1 libsharedlib1 #MINVER# sharedlib@Base 2.1 Since this upstream source creates the proper auto-generated     Makefile, there is no need to create debian/install and debian/ manpages files.     В каталоге debian/ имеются и другие шаблонные файлы. Их также следует обновить. Шаблонные файлы в каталоге debian/. (v=2.1):  $ rm -f debian/clean debian/dirs debian/install debian/links $ rm -f debian/README.source debian/source/*.ex $ tree -F debian debian/ ├── README.Debian ├── changelog ├── control ├── copyright ├── debhello.dirs ├── debhello.doc-base ├── debhello.docs ├── debhello.examples ├── debhello.info ├── debhello.install ├── debhello.links     ├── debhello.manpages ├── gbp.conf ├── libsharedlib-dev.install ├── libsharedlib1.install ├── libsharedlib1.symbols ├── patches/ │   ├── 000-cmake-multiarch.patch │   └── series ├── rules* ├── salsa-ci.yml ├── source/ │   └── format ├── tests/ │   └── control ├── upstream/ │   └── metadata └── watch 5 directories, 24 files Остальные работы по подготовке пакета практически полностью     совпадают с описанными в «Раздел 13.8, «Makefile.in + configure (single-binary package)»».     Here are the generated dependency list of all binary packages. The generated dependency list of all binary packages (v=2.1):  $ dpkg -f debhello-dbgsym_2.1-1_amd64.deb pre-depends \ depends recommends conflicts breaks Depends: debhello (= 2.1-1) $ dpkg -f debhello_2.1-1_amd64.deb pre-depends \ depends recommends conflicts breaks Depends: libsharedlib1 (= 2.1-1), libc6 (>= 2.34)     $ dpkg -f libsharedlib-dev_2.1-1_amd64.deb pre-depends \ depends recommends conflicts breaks Depends: libsharedlib1 (= 2.1-1) $ dpkg -f libsharedlib1-dbgsym_2.1-1_amd64.deb pre-depends \ depends recommends conflicts breaks Depends: libsharedlib1 (= 2.1-1) $ dpkg -f libsharedlib1_2.1-1_amd64.deb pre-depends \ depends recommends conflicts breaks Depends: libc6 (>= 2.2.5) 13.13. Интернационализация Here is an example of updating the simple upstream C source     debhello-2.0.tar.gz presented in «Раздел 13.11, «Autotools (multi-binary package)»» for internationalization (i18n) and creating the updated upstream C source debhello-2.0.tar.gz. In the real situation, the package should already be     internationalized. So this example is educational for you to understand how this internationalization is implemented. Подсказка     The routine maintainer activity for the i18n is simply to add translation po files reported to you via the Bug Tracking System (BTS) to the po/ directory and to update the language list in the po/LINGUAS file.     Получитм исходный код и создадим пакет Debian. Загрузим debhello-2.0.tar.gz (i18n).  $ wget http://www.example.org/download/debhello-2.0.tar.gz ... $ tar -xzmf debhello-2.0.tar.gz $ tree . ├── debhello-2.0 │   ├── LICENSE │   ├── Makefile.am │   ├── README.md │   ├── configure.ac │   ├── data     │   │   ├── hello.desktop │   │   └── hello.png │   ├── lib │   │   ├── Makefile.am │   │   ├── sharedlib.c │   │   └── sharedlib.h │   ├── man │   │   ├── Makefile.am │   │   └── hello.1 │   └── src │   ├── Makefile.am │   └── hello.c └── debhello-2.0.tar.gz 6 directories, 14 files     Internationalize this source tree with the gettextize command and remove files auto-generated by Autotools. запустим gettextize (i18n):  $ cd /path/to/debhello-2.0 $ gettextize Creating po/ subdirectory Creating build-aux/ subdirectory Copying file ABOUT-NLS Copying file build-aux/config.rpath Not copying intl/ directory. Copying file po/Makefile.in.in Copying file po/Makevars.template Copying file po/Rules-quot Copying file po/boldquot.sed Copying file po/en@boldquot.header Copying file po/en@quot.header Copying file po/insert-header.sin Copying file po/quot.sed Copying file po/remove-potcdate.sin Creating initial po/POTFILES.in Creating po/ChangeLog Creating directory m4 Copying file m4/gettext.m4 Copying file m4/iconv.m4 Copying file m4/lib-ld.m4 Copying file m4/lib-link.m4 Copying file m4/lib-prefix.m4 Copying file m4/nls.m4 Copying file m4/po.m4 Copying file m4/progtest.m4     Creating m4/ChangeLog Updating Makefile.am (backup is in Makefile.am~) Updating configure.ac (backup is in configure.ac~) Creating ChangeLog Please use AM_GNU_GETTEXT([external]) in order to cause autoconfiguration to look for an external libintl. Please create po/Makevars from the template in po/Makevars.template. You can then remove po/Makevars.template. Please fill po/POTFILES.in as described in the documentation. Please run 'aclocal' to regenerate the aclocal.m4 file. You need aclocal from GNU automake 1.9 (or newer) to do this. Then run 'autoconf' to regenerate the configure file. You will also need config.guess and config.sub, which you can get from the CV... of the 'config' project at http://savannah.gnu.org/. The commands to fetch th... are $ wget 'http://savannah.gnu.org/cgi-bin/viewcvs/*checkout*/config/config/conf... $ wget 'http://savannah.gnu.org/cgi-bin/viewcvs/*checkout*/config/config/conf... You might also want to copy the convenience header file gettext.h from the /usr/share/gettext directory into your package. It is a wrapper around that implements the configure --disable-nl... option. Press Return to acknowledge the previous 6 paragraphs. $ rm -rf m4 build-aux *~     Проверим созданные файлы в каталоге po/. файлы в каталоге po (i18n):  $ ls -l po total 60 -rw-rw-r-- 1 osamu osamu 494 Jul 24 10:14 ChangeLog -rw-rw-r-- 1 osamu osamu 17577 Jul 24 10:14 Makefile.in.in -rw-rw-r-- 1 osamu osamu 3376 Jul 24 10:14 Makevars.template     -rw-rw-r-- 1 osamu osamu 59 Jul 24 10:14 POTFILES.in -rw-rw-r-- 1 osamu osamu 2203 Jul 24 10:14 Rules-quot -rw-rw-r-- 1 osamu osamu 217 Jul 24 10:14 boldquot.sed -rw-rw-r-- 1 osamu osamu 1337 Jul 24 10:14 en@boldquot.header -rw-rw-r-- 1 osamu osamu 1203 Jul 24 10:14 en@quot.header -rw-rw-r-- 1 osamu osamu 672 Jul 24 10:14 insert-header.sin -rw-rw-r-- 1 osamu osamu 153 Jul 24 10:14 quot.sed -rw-rw-r-- 1 osamu osamu 432 Jul 24 10:14 remove-potcdate.sin     Let’s update the configure.ac by adding «AM_GNU_GETTEXT ([external])», etc.. configure.ac (i18n):  $ vim configure.ac ... hack, hack, hack, ... $ cat configure.ac # -*- Autoconf -*- # Process this file with autoconf to produce a configure script. AC_PREREQ([2.69]) AC_INIT([debhello],[2.2],[foo@example.org]) AC_CONFIG_SRCDIR([src/hello.c]) AC_CONFIG_HEADERS([config.h]) echo "Standard customization chores" AC_CONFIG_AUX_DIR([build-aux]) AM_INIT_AUTOMAKE([foreign]) # Set default to --enable-shared --disable-static LT_INIT([shared disable-static]) # find the libltdl sources in the libltdl sub-directory LT_CONFIG_LTDL_DIR([libltdl])     # choose one LTDL_INIT([recursive]) #LTDL_INIT([subproject]) #LTDL_INIT([nonrecursive]) # Add #define PACKAGE_AUTHOR ... in config.h with a comment AC_DEFINE(PACKAGE_AUTHOR, ["Osamu Aoki"], [Define PACKAGE_AUTHOR]) # Checks for programs. AC_PROG_CC # desktop file support required AM_GNU_GETTEXT_VERSION([0.19.3]) AM_GNU_GETTEXT([external]) # only for the recursive case AC_CONFIG_FILES([Makefile po/Makefile.in lib/Makefile man/Makefile src/Makefile]) AC_OUTPUT     Let’s create the po/Makevars file from the po/Makevars.template file. po/Makevars (i18n):  ... hack, hack, hack, ... $ diff -u po/Makevars.template po/Makevars --- po/Makevars.template 2024-07-24 10:14:46.440850967 +0900 +++ po/Makevars 2024-07-24 10:14:46.520852183 +0900 @@ -18,14 +18,14 @@ # or entity, or to disclaim their copyright. The empty string stands for # the public domain; in this case the translators are expected to disclaim # their copyright. -COPYRIGHT_HOLDER = Free Software Foundation, Inc.     +COPYRIGHT_HOLDER = Osamu Aoki # This tells whether or not to prepend "GNU " prefix to the package # name that gets inserted into the header of the $(DOMAIN).pot file. # Possible values are "yes", "no", or empty. If it is empty, try to # detect it automatically by scanning the files in $(top_srcdir) for # "GNU packagename" string. -PACKAGE_GNU = +PACKAGE_GNU = no # This is the email address or URL to which the translators shall report # bugs in the untranslated strings: $ rm po/Makevars.template     Let’s update C sources for the i18n version by wrapping strings with _(…​). src/hello.c (i18n):  ... hack, hack, hack, ... $ cat src/hello.c #include "config.h" #include #include     #include #define _(string) gettext (string) int main() { printf(_("Hello, I am " PACKAGE_AUTHOR "!\n")); sharedlib(); return 0; } lib/sharedlib.c (i18n):  ... hack, hack, hack, ... $ cat lib/sharedlib.c #include #include     #define _(string) gettext (string) int sharedlib() { printf(_("This is a shared library!\n")); return 0; }     The new gettext (v=0.19) can handle the i18n version of the desktop file directly. data/hello.desktop.in (i18n):  $ fgrep -v '[ja]=' data/hello.desktop > data/hello.desktop.in $ rm data/hello.desktop $ cat data/hello.desktop.in [Desktop Entry]     Name=Hello Comment=Greetings Type=Application Keywords=hello Exec=hello Terminal=true Icon=hello.png Categories=Utility;     Приведём список входных файлов для извлечения переводных строк в po/POTFILES.in. po/POTFILES.in (i18n):  ... hack, hack, hack, ...     $ cat po/POTFILES.in src/hello.c lib/sharedlib.c data/hello.desktop.in     Here is the updated root Makefile.am with po added to the SUBDIRS environment variable. Makefile.am (i18n):  $ cat Makefile.am # recursively process `Makefile.am` in SUBDIRS     SUBDIRS = po lib src man ACLOCAL_AMFLAGS = -I m4 EXTRA_DIST = build-aux/config.rpath m4/ChangeLog     Let’s make a translation template file, debhello.pot. po/debhello.pot (i18n):  $ xgettext -f po/POTFILES.in -d debhello -o po/debhello.pot -k_ $ cat po/debhello.pot # SOME DESCRIPTIVE TITLE. # Copyright (C) YEAR THE PACKAGE'S COPYRIGHT HOLDER # This file is distributed under the same license as the PACKAGE package. # FIRST AUTHOR , YEAR. # #, fuzzy msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" "Report-Msgid-Bugs-To: \n" "POT-Creation-Date: 2024-07-24 10:14+0900\n" "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n" "Last-Translator: FULL NAME \n" "Language-Team: LANGUAGE \n" "Language: \n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=CHARSET\n"     "Content-Transfer-Encoding: 8bit\n" #: src/hello.c:9 #, c-format msgid "Hello, I am " msgstr "" #: lib/sharedlib.c:7 #, c-format msgid "This is a shared library!\n" msgstr "" #: data/hello.desktop.in:3 msgid "Hello" msgstr "" #: data/hello.desktop.in:4 msgid "Greetings" msgstr "" #: data/hello.desktop.in:6 msgid "hello" msgstr ""     Let’s add a translation for French. po/LINGUAS и po/fr.po (i18n):  $ echo 'fr' > po/LINGUAS $ cp po/debhello.pot po/fr.po $ vim po/fr.po ... hack, hack, hack, ... $ cat po/fr.po # SOME DESCRIPTIVE TITLE. # This file is put in the public domain. # FIRST AUTHOR , YEAR. # msgid "" msgstr "" "Project-Id-Version: debhello 2.2\n" "Report-Msgid-Bugs-To: foo@example.org\n" "POT-Creation-Date: 2015-03-01 20:22+0900\n" "PO-Revision-Date: 2015-02-21 23:18+0900\n" "Last-Translator: Osamu Aoki \n" "Language-Team: French \n" "Language: ja\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n"     #: src/hello.c:34 #, c-format msgid "Hello, my name is %s!\n" msgstr "Bonjour, je m'appelle %s!\n" #: lib/sharedlib.c:29 #, c-format msgid "This is a shared library!\n" msgstr "Ceci est une bibliothèque partagée!\n" #: data/hello.desktop.in:3 msgid "Hello" msgstr "" #: data/hello.desktop.in:4 msgid "Greetings" msgstr "Salutations" #: data/hello.desktop.in:6 msgid "hello" msgstr "" #: data/hello.desktop.in:9 msgid "hello.png" msgstr "" Работа над подготовкой пакета практически полностью совпадает с     тем, что описывается в «Раздел 13.11, «Autotools (multi-binary package)»».     You can find more i18n examples by following «Раздел 13.14, «Детали»». 13.14. Детали     Детали представенных в документации примеров, а также их вариантов, можно получить следующим образом. Как получить детали.      $ apt-get source debmake-doc $ cd debmake-doc* $ cd examples $ view examples/README.md     Follow the exact instruction in examples/README.md.     $ cd examples $ make     Now, each directory named as examples/debhello-?.?_build-? contains the Debian packaging example. * эмулированный журнал активности командной строки консоли: файл .log * эмулированный журнал активности командной строки консоли (короткий): файл .slog     * срез образа дерева исходного кода после выполнения команды debmake: каталог debmake * snapshot source tree image after proper packaging: the packge directory * срез образа дерева исходного кода после выполнения команды debuild: каталог test     Notable examples are: * the POSIX shell script with Makefile with i18n (v=3.0),     * the C source with Makefile.in + configure with i18n (v=3.2), * the C source with Autotools with i18n with i18n (v=3.3), and * the C source with CMake with i18n (v=3.4). Глава 14. Страница руководства debmake(1) 14.1. НАЗВАНИЕ     debmake - program to make a Debian source package 14.2. СИНТАКСИС debmake [-h] [-c | -k] [-n | -a package-version.orig.tar.gz | -d | -t ] [-p package] [-u version] [-r revision] [-z extension] [-b     "binarypackage[:type], …​]" [-e foo@example.org] [-f "firstname lastname"] [-i "buildtool" | -j] [-l license_file] [-m] [-o file] [-q] [-s] [-v] [-w "addon, …​"] [-x [01234]] [-y] [-L] [-P] [-T] 14.3. ОПИСАНИЕ     debmake помогает собрать пакет Debian из исходного кода основной ветки разработки. Обычно это делается следующим образом: * Загружается tar-архив основной ветки разработки в виде файла пакет-версия.tar.gz. * Исходный код распаковывается, создаются файлы в каталоге пакет-версия/. * Вызывается debmake в каталоге пакет-версия/, возможно, без     аргументов. * Файлы в каталоге package-version/debian/ настраиваются вручную. * dpkg-buildpackage (usually from its wrapper debuild or sbuild ) is invoked in the package-version/ directory to make Debian packages. Обязательно защитите путём соответствующего включения в кавычки     аргументы опций -b, -f, -l и -w от вмешательства командной оболочки. 14.3.1. необязательные аргументы: -h, --help показать справочное сообщение и выйти. -c, --copyright сканировать исходный код на предмет текста об авторском праве и лицензировании и выйти. o -c: простой стиль вывода o -cc: обычный стиль вывода (схож с файлом debian/copyright ) o -ccc: отладочный стиль вывода -k, --kludge сравнить файл debian/copyright с исходным кодом и выйти. Файл debian/copyright должен быть организован таким образом, что наиболее общие файловые шаблоны размещаются раньше конкретных исключений. o -k: простой стиль вывода o -kk: подробный стиль вывода -n, --native make a native Debian source package without .orig.tar.gz. This makes a Debian source format «3.0 (native)» package. If you are thinking of packaging a Debian-specific source tree with debian/ in it into a native Debian package, please think otherwise. You can use the «debmake -d -i debuild» or « debmake -t -i debuild» commands to make a Debian non-native package using the Debian source format «3.0 (quilt)» The only difference is that the debian/changelog file must use the non-native version scheme: version-revision. The non-native package is more friendly to downstream distributions. -a пакет-версия.tar.gz, --archive пакет-версия.tar.gz использовать непосредственно tar-архив с исходным кодом основной ветки. (отменяются опции -p, -u, -z) The upstream tarball may be specified as package_version .orig.tar.gz and tar.gz. For other cases, it may be tar.bz2, or tar.xz. Если в имени указанного tar-архива основной ветки содержатся буквы в верхнем регистре, то в имени пакета Debian они будут преобразованы в буквы нижнего регистра. If the specified argument is the URL (http://, https://, or ftp://) to the upstream tarball, the upstream tarball is downloaded from the URL using wget or curl. -d, --dist run the «make dist» command equivalents first to generate the upstream tarball and use it. The «debmake -d» command is designed to run in the package/ directory hosting the upstream VCS with the build system supporting the «make dist» command equivalents. (automake/ autoconf, …​) -t, --tar run the «tar» command to generate the upstream tarball and use it. The «debmake -t» command is designed to run in the package/ directory hosting the upstream VCS. Unless you provide the upstream version with the -u option or with the debian/ changelog file, a snapshot upstream version is generated in the 0\~%y%m%d%H%M format, e.g., 0~1403012359, from the UTC date and time. The generated tarball excludes the debian/ directory found in the upstream VCS. (It also excludes typical VCS directories: .git/, .hg/, .svn/, .CVS/.) -p пакет, --package пакет установить имя пакета Debian. -u версия, --upstreamversion версия установить версию пакета основной ветки. -r редакция, --revision редакция установить номер редации пакета Debian. -z расширение, --targz расширение set the tarball type, extension=(tar.gz|tar.bz2|tar.xz). (alias: z, b, x) -b "binarypackage[:type],…​", --binaryspec "binarypackage [:type],…​" set the binary package specs by a comma separated list of binarypackage:type pairs. Here, binarypackage is the binary package name, and the optional type is chosen from the following type values: o bin: C/C++ compiled ELF binary code package (any, foreign) (default, alias: "", i.e., null-string) o data: Data (fonts, graphics, …​) package (all, foreign) (alias: da) o dev: пакет с библиотекой разработки (any, same) (псевдоним: de) o doc: пакет документации (all, foreign) (псевдоним: do) o lib: пакет с библиотекой (any, same) (псевдоним: l) o perl: пакет со сценарием на языке Perl (all, foreign) (псевдоним: pl)     o python3: Python (version 3) script package (all, foreign) (alias: py3, python, py) o ruby: пакет со сценарием на языке Ruby (all, foreign) (псевдоним: rb) o nodejs: Node.js based JavaScript package (all, foreign) (alias: js) o script: Shell and other interpretted language script package (all, foreign) (alias: sh) The pair values in the parentheses, such as (any, foreign), are the Architecture and Multi-Arch stanza values set in the debian/control file. In many cases, the debmake command makes good guesses for type from binarypackage. If type is not obvious, type is set to bin. Here are examples for typical binary package split scenarios where the upstream Debian source package name is foo: o Generating an executable binary package foo: # «-b’foo:bin'», or its short form `-b'-'`", or no -b option o Generating an executable (python3) binary package python3-foo: # «-b’python3-foo:py'», or its short form « -b’python3-foo'» o Generating a data package foo: # «-b’foo:data'», or its short form «-b'-:data'» o Generating a executable binary package foo and a documentation one foo-doc: # «-b’foo:bin,foo-doc:doc'», or its short form « -b'-:-doc'» o Generating a executable binary package foo, a library package libfoo1, and a library development package libfoo-dev: # «-b’foo:bin,libfoo1:lib,libfoo-dev:dev'» or its short form «-b'-,libfoo1,libfoo-dev'» Если содержимое дерева исходного кода не совпадает с настройками поля тип, то команда debmake выводит предупреждение. -e foo@example.org, --email foo@example.org установить адрес электронной почты. По умолчанию берётся значение переменной окружения $DEBEMAIL. -f "имя фамилия", --fullname "имя фамилия" установить имя и фамилию. По умолчанию берётся значение переменной окружения $DEBFULLNAME. -i "инструментсборки", --invoke "инструментсборки" invoke "buildtool" at the end of execution. buildtool may be «dpkg-buildpackage», «debuild», «sbuild», etc. По умолчанию никакая программа не выполняется. Передача этой опции автоматически приводит к передаче опции --local. -j, --judge запустить dpkg-depcheck для выявления сборочных зависимостей и определения путей файлов. Файлы журнала располагаются в родительском каталоге. o package.build-dep.log: файл журнала dpkg-depcheck. o package.install.log: файл журнала, в который записываются файлы из каталога debian/tmp. -l "license_file,…​", --license "license_file,…​" add formatted license text to the end of the debian/copyright file holding license scan results. The default is to add COPYING and LICENSE, and license_file needs to list only the additional file names all separated by «,». -m, --monoarch подготовить пакеты без поддержки мультиархитектурности. -o файл, --option файл read optional parameters from file. (This is not for everyday use.) The content of file is sourced as the Python code at the end of para.py. For example, the package description can be specified by the following file. para['desc'] = 'program short description' para['desc_long'] = '''\ program long description which you wish to include. . Empty line is space + . You keep going on ... ''' -q, --quitearly выйти до создания файлов в каталоге debian/. -s, --spec use upstream spec (pyproject.py for Python, etc.) for the package description. -v, --version показать информацию о версии. -w "addon,…​", --with "addon,…​" добавить дополнительные аргументы опции --with команды dh(1) в качестве дополнений в файл debian/rules. The addon values are listed all separated by «,», e.g., «-w "python3,autoreconf"». For Autotools based packages, autoreconf as addon to run « autoreconf -i -v -f» for every package building is default behavior of the dh(1) command. For Autotools based packages, if they install Python (version 3) programs, setting python3 as addon to the debmake command argument is needed since this is non-obvious. But for pyproject.toml based Python packages, setting python3 as     addon to the debmake command argument is not needed since this is obvious and the debmake command automatically set it to the dh(1) command. -x n, --extra n generate configuration files as templates. (Please note debian/changelog, debian/control, debian/copyright, and debian/rules are bare minimum configuration files to build a Debian binary package.) The number n determines which configuration templates are generated. o -x0: all required configuration template files. (selected option if any of these files already exist) o -x1: all -x0 files + desirable configuration template files with binary package type supports. o -x2: all -x1 files + normal configuration template files with maintainer script supports. o -x3: all -x2 files + optional configuration template files. (default optuin) o -x4: all -x3 files + deprecated configuration template files. Some configuration template files are generated with the extra .ex suffix to ease their removal. To activate these, rename their file names to the ones without the .ex suffix and edit their     contents. Existing configuration files are never overwritten. If you wish to update some of the existing configuration files, please rename them before running the debmake command and manually merge the generated configuration files with the old renamed ones. -y, --yes «force yes» for all prompts. (without option: «ask [Y/n]»; doubled option: «force no») -L, --local создать файлы настройки для локального пакета, чтобы     перехитрить проверки lintian(1). -P, --pedantic педантично проверять автоматически создаваемые файлы. -T, --tutorial output tutorial comment lines in template files. default when -x3 or -x4 is set. 14.4. ПРИМЕРЫ For a well behaving source, you can build a good-for-local-use installable single Debian binary package easily with one command. Test install of such a package generated in this way offers a good alternative to the traditional «make install» command     installing into the /usr/local directory since the Debian package can be removed cleanly by the «dpkg -P '…​'» command. Here are some examples of how to build such test packages. (These should work in most cases. If the -d option does not work, try the -t option instead.)     For a typical C program source tree packaged with autoconf/ automake:     * debmake -d -i debuild     For a typical Python (version 3) module source tree:     * debmake -s -d -b":python3" -i debuild     For a typical Python (version 3) module in the package-version .tar.gz archive:     * debmake -s -a package-version.tar.gz -b":python3" -i debuild     Для обычного модуля языка Perl в виде архива пакет-версия.tar.gz:     * debmake -a package-version.tar.gz -b":perl" -i debuild 14.5. ВСПОМОГАТЕЛЬНЫЕ ПАКЕТЫ     Для работы над пакетами может потребоваться установка некоторых дополнительных специализированных вспомогательных пакетов. * Python (version 3) programs may require the pybuild-plugin-pyproject package. * The Autotools (autoconf + automake) build system may require autotools-dev or dh-autoreconf package. * Ruby programs may require the gem2deb package.     * Node.js based JavaScript programs may require the pkg-js-tools package. * Java programs may require the javahelper package. * Для программ для окружения Gnome может потребоваться пакет gobject-introspection. * и т. д. 14.6. ПРЕДОСТЕРЕЖЕНИЯ Although debmake is meant to provide template files for the package maintainer to work on, actual packaging activities are     often performed without using debmake while referencing only existing similar packages and «Debian Policy Manual». All template files generated by debmake are required to be modified manually.     There are 2 positive points for debmake: * debmake helps to write terse packaging tutorial «Guide for     Debian Maintainers» (debmake-doc package). * debmake provides short extracted license texts as debian/ copyright in decent accuracy to help license review.     Please double check copyright with the licensecheck(1) command. There are some limitations for what characters may be used as a     part of the Debian package. The most notable limitation is the prohibition of uppercase letters in the package name. Here is a summary as a set of regular expressions: * Upstream package name (-p): [-+.a-z0-9]{2,}     * Binary package name (-b): [-+.a-z0-9]{2,} * Upstream version (-u): [0-9][-+.:~a-z0-9A-Z]* * Debian revision (-r): [0-9][+.~a-z0-9A-Z]*     See the exact definition in «Chapter 5 - Control files and their fields» in the «Debian Policy Manual». debmake assumes relatively simple packaging cases. So all     programs related to the interpreter are assumed to be « Architecture: all». This is not always true. 14.7. ОТЛАДКА     Сообщения об ошибках отправляйте с помощью команды reportbug для пакета debmake.     Набор символов в переменной окружении $DEBUG определяет уровень вывода журнала. * i: main.py logging * p: para.py logging * s: checkdep5.py check_format_style() logging * y: checkdep5.py split_years_name() logging * b: checkdep5.py parse_lines() 1 logging — content_state scan loop: begin-loop * m: checkdep5.py parse_lines() 2 logging — content_state scan loop: after regex match * e: checkdep5.py parse_lines() 3 logging — content_state scan loop: end-loop * a: checkdep5.py parse_lines() 4 logging — print author/     translator section text * f: checkdep5.py check_all_license() 1 logging — input filename for the copyright scan * l: checkdep5.py check_all_license() 2 logging — print license section text * c: checkdep5.py check_all_license() 3 logging — print copyright section text * k: checkdep5.py check_all_license() 4 logging — sort key for debian/copyright stanza * r: sed.py logging * w: cat.py logging * n: kludge.py logging («debmake -k»)     Use this feature as:     $ DEBUG=ipsybmeaflckrwn debmake ...     See README.developer in the source for more. 14.8. АВТОР     Copyright © 2014-2024 Osamu Aoki 14.9. ЛИЦЕНЗИЯ     Лицензия Expat 14.10. СМОТРИТЕ ТАКЖЕ The debmake-doc package provides the «Guide for Debian     Maintainers» in plain text, HTML and PDF formats under the /usr/ share/doc/debmake-doc/ directory. See also dpkg-source(1), deb-control(5), debhelper(7), dh(1),     dpkg-buildpackage(1), debuild(1), quilt(1), dpkg-depcheck(1), sbuild(1), gbp-buildpackage(1), and gbp-pq(1) manpages. Глава 15. debmake options     Here are some additional explantion for debmake options. 15.1. Shortcut options (-a, -i)     Команда debmake предлагает 2 опции для выполнения быстрых действий.     * -a : открыть tar-архив основной ветки * -i : выполнить сценарий для сборки двоичного пакета     Действия из примера, приведённого выше в «Глава 5, Simple packaging», можно выполнить с помощью следующей простой команды.     $ debmake -a package-1.0.tar.gz -i debuild Подсказка     A URL such as «https://www.example.org/DL/package-1.0.tar.gz» may be used for the -a option. Подсказка     A URL such as «https://arm.koji.fedoraproject.org/packages/ibus/ 1.5.7/3.fc21/src/ibus-1.5.7-3.fc21.src.rpm» may be used for the -a option, too. 15.2. debmake -b The debmake command with the -b option provides an intuitive and     flexible method to create the initial template debian/control file defining the split of the Debian binary packages with following stanzas: * Package: * Architecture: (e.g. amd64)     * Multi-Arch: (see «Раздел 9.10, «Multiarch»») * Depends: * Pre-Depends:     The debmake command also sets an appropriate set of substvars used in each pertinent dependency stanza.     Ниже приводится цитата соответствующей части страницы руководства debmake. -b "binarypackage[:type],…​", --binaryspec "binarypackage [:type],…​" set the binary package specs by a comma separated list of binarypackage:type pairs. Here, binarypackage is the binary package name, and the optional type is chosen from the following type values: o bin: C/C++ compiled ELF binary code package (any, foreign) (default, alias: "", i.e., null-string) o data: Data (fonts, graphics, …​) package (all, foreign) (alias: da) o dev: пакет с библиотекой разработки (any, same) (псевдоним: de) o doc: пакет документации (all, foreign) (псевдоним: do) o lib: пакет с библиотекой (any, same) (псевдоним: l) o perl: пакет со сценарием на языке Perl (all, foreign) (псевдоним: pl) o python3: Python (version 3) script package (all, foreign) (alias: py3, python, py) o ruby: пакет со сценарием на языке Ruby (all, foreign) (псевдоним: rb) o nodejs: Node.js based JavaScript package (all, foreign) (alias: js) o script: Shell and other interpretted language script package (all, foreign) (alias: sh) The pair values in the parentheses, such as (any, foreign), are the Architecture and Multi-Arch stanza values set in the debian/control file. In many cases, the debmake command makes good guesses for type from binarypackage. If type is not     obvious, type is set to bin. Here are examples for typical binary package split scenarios where the upstream Debian source package name is foo: o Generating an executable binary package foo: # «-b’foo:bin'», or its short form `-b'-'`", or no -b option o Generating an executable (python3) binary package python3-foo: # «-b’python3-foo:py'», or its short form « -b’python3-foo'» o Generating a data package foo: # «-b’foo:data'», or its short form «-b'-:data'» o Generating a executable binary package foo and a documentation one foo-doc: # «-b’foo:bin,foo-doc:doc'», or its short form « -b'-:-doc'» o Generating a executable binary package foo, a library package libfoo1, and a library development package libfoo-dev: # «-b’foo:bin,libfoo1:lib,libfoo-dev:dev'» or its short form «-b'-,libfoo1,libfoo-dev'» Если содержимое дерева исходного кода не совпадает с настройками поля тип, то команда debmake выводит предупреждение. 15.3. debmake -cc The debmake command with the -cc option can make a summary of the     copyright and license for the entire source tree to standard output. $ tar -xvzf package-1.0.tar.gz     $ cd package-1.0 $ debmake -cc | less     Опция -c позволяет получить более краткий отчёт. 15.4. Snapshot upstream tarball (-d, -t) This test building scheme is good for the git repository     organized as described in gbp-buildpackage(7) which uses the master, upstream, and pristine-tar branches. The upstream snapshot from the upstream source tree in the     upstream VCS can be made with the -d option if the upstream supports the «make dist» equivalence.     $ cd /path/to/upstream-vcs $ debmake -d -i debuild С другой стороны, то же самое можно сделать с помощью опции -t в     том случае, если с помощью команды tar можно создать tar-архив основной ветки.     $ cd /path/to/upstream-vcs $ debmake -p package -t -i debuild Unless you provide the upstream version with the -u option or     with the debian/changelog file, a snapshot upstream version is generated in the 0~%y%m%d%H%M format, e.g., 0~1403012359, from the UTC date and time.     If the upstream VCS is hosted in the package/ directory instead of the upstream-vcs/ directory, the «-p package» can be skipped. If the upstream source tree in the VCS contains the debian/* files, the debmake command with either the -d option or the -t     option combined with the -i option automates the making of a non-native Debian package from the VCS snapshot while using these debian/* files. $ cp -r /path/to/package-0~1403012359/debian/. /path/to/upstream-vcs/debian $ dch     ... update debian/changelog $ git add -A .; git commit -m "vcs with debian/*" $ debmake -t -p package -i debuild This non-native Debian binary package building scheme without the     real upstream tarball is considered as the quasi-native Debian package. See «Раздел 10.13, «Quasi-native Debian packaging»». 15.5. debmake -j     This is an experimental feature. The generation of a functioning multi-binary package always     requires more manual work than that of a functioning single binary package. The test build of the source package is the essential part of it. Например, создадим пакет из того же архива package-1.0.tar.gz     (см. «Глава 5, Simple packaging») с поддержкой набора из нескольких двоичных пакетов. * Запустите команду debmake с опцией -j для выполнения тестовой сборки и создания отчёта. $ debmake -j -a package-1.0.tar.gz * Check the last lines of the package.build-dep.log file to judge build dependencies for Build-Depends. (You do not need to list packages used by debhelper, perl, or fakeroot explicitly in Build-Depends. This technique is useful for the generation of a single binary package, too.) * Проверьте содержимое файла пакет.install.log для определения путей установки файлов, чтобы решить, как разделить эти файлы на несколько пакетов. * Начните работу над пакетом с помощью команды debmake.     $ rm -rf package-1.0 $ tar -xvzf package-1.0.tar.gz $ cd package-1.0 $ debmake -b"package1:type1, ..." * Обновите файлы debian/control и debian/двоичныйпакет.install, используя полученную выше информацию. * При необходимости обновите другие файлы debian/*. * Build the Debian package with the debuild command or its equivalent. $ debuild * All binary package entries specified in the debian/ binarypackage.install file are generated as binarypackage_version-revision_arch.deb. Примечание The -j option for the debmake command invokes dpkg-depcheck(1) to run debian/rules under strace(1) to obtain library dependencies.     Unfortunately, this is very slow. If you know the library package dependencies from other sources such as the SPEC file in the source, you may just run the "debmake …​" command without the -j option and run the «debian/rules install» command to check the install paths of the generated files. 15.6. debmake -k     This is an experimental feature. При обновлении пакета до нового выпуска основной ветки команда debmake может проверить содержимое существующего файла debian/     copyright и сравнить его с информацией об авторских правах и лицензировании для всего обновлённого дерева исходного кода целиком. $ cd package-vcs     $ gbp import-orig --uscan --pristine-tar ... update source with the new upstream release $ debmake -k | less The «debmake -k» command parses the debian/copyright file from the top to the bottom and compares the license of all the     non-binary files in the current package with the license described in the last matching file pattern entry of the debian/ copyright file. При редактировании автоматически созданного файла debian/     copyright убедитесь, что наиболее общие шаблоны файлов помещены в верхней части списка. Подсказка     For all new upstream releases, run the «debmake -k» command to ensure that the debian/copyright file is current. 15.7. debmake -P Команда debmake, запущенная с опцией -P, педантично проверяет     создаваемые автоматически файлы на предмет наличия текста об автоских правах и лицензировании, даже если они подпадают под действие разрешительной лицензии. This option affects not only the content of the debian/copyright     file generated by normal execution, but also the output by the execution with the -k, -c, -cc, and -ccc options. 15.8. debmake -T The debmake command invoked with the -T option additionally     prints verbose tutorial comment lines. The lines marked with ### in the template files are part of the verbose tutorial comment lines. 15.9. debmake -x     Количество шаблонных файлов, создаваемых командой debmake зависит от опции -x[01234].     * See «Раздел 13.1, «Выборочное применение шаблонов»» for cherry-picking of the template files. Примечание     Команда debmake не меняет ни один из существующих файлов настройки.